Ledvion 6-Pack Round LED Recessed Ground Spots User Manual

పరిచయం

Thank you for choosing Ledvion LED Recessed Ground Spots. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting product. Please read these instructions carefully before installation and retain them for future reference.

భద్రతా సూచనలు

• విద్యుత్ భద్రత: Installation should only be performed by a qualified electrician in accordance with local electrical codes. Ensure the power supply is disconnected before installation or maintenance.
• బాహ్య వినియోగం: These ground spots are designed for outdoor use with an IP67 rating, meaning they are protected against dust and immersion in water up to 1 meter for 30 minutes. However, ensure all connections are properly sealed and waterproofed to maintain this rating.
• కేబుల్ కనెక్షన్: The product comes with a 1-meter connection cable (3 x 1.5 mm²) without a plug. This requires a secure, waterproof connection to your main power supply.
• ప్లేస్‌మెంట్: Ensure the installation location allows for proper drainage and does not accumulate standing water for extended periods.
• బరువు మోయు: These ground spots are designed to be walkable. Ensure they are installed flush with the ground surface to prevent tripping hazards and damage.
• ఉష్ణోగ్రత: Do not cover the lights with insulating material that could lead to overheating.

ప్యాకేజీ విషయాలు

ఇన్‌స్టాలేషన్‌తో కొనసాగే ముందు అన్ని భాగాలు ఉన్నాయని మరియు దెబ్బతినకుండా ఉన్నాయని ధృవీకరించండి.

Image: Contents of the Ledvion 6-pack ground spot package, showing 6 LED ground spot fixtures, 6 LED GU10 bulbs, 24 screws, 6 Allen keys, and 1 manual.

• 6 x LED Ground Spot fixtures
• 6 x GU10 LED Bulbs (5W, 6500K)
• 24 x మౌంటు స్క్రూలు
• 6 x అలెన్ కీలు
• 1 x వినియోగదారు మాన్యువల్

స్పెసిఫికేషన్లు

Image: Diagram showing the dimensions of the ground spot fixture: 110mm top diameter, 82mm body diameter, and 148mm height, alongside the 1-meter cable.

Image: EU Energy Label for Ledvion LVB10004, showing energy efficiency class G and 5 kWh/1000h consumption. For more details, visit EPREL డేటాబేస్.

సెటప్ మరియు ఇన్‌స్టాలేషన్

ముఖ్యమైన: ఏదైనా ఇన్‌స్టాలేషన్ పనిని ప్రారంభించే ముందు ప్రధాన విద్యుత్ సరఫరా స్విచ్ ఆఫ్ చేయబడిందని నిర్ధారించుకోండి.

1. ఇన్‌స్టాలేషన్ సైట్‌ను సిద్ధం చేయండి: Dig a hole in the desired location that is slightly larger than the ground spot's body (82mm diameter, 148mm height) to allow for proper drainage and cable routing. Ensure the ground is level.
2. కేబుల్ రూటింగ్: Route the 1-meter connection cable from the ground spot to your main power supply or junction box. Use appropriate outdoor-rated cabling and waterproof connectors (e.g., IP68 T-connectors or waterproof connectors like SKU: LV50023, LV50024) for all connections to maintain the IP67 rating.
3. విద్యుత్ కనెక్షన్: Connect the ground spot's cable to your power supply. This product does not come with a plug, requiring a direct, secure electrical connection. Ensure correct wiring (Live, Neutral, Earth).
4. GU10 బల్బును చొప్పించండి: Carefully insert the provided GU10 LED bulb into the fixture. Align the pins with the socket and twist to secure.
5. ఫిక్చర్‌ను ఉంచండి: Place the ground spot fixture into the prepared hole. Ensure the top surface is flush with the ground level to prevent water accumulation and tripping hazards.
6. ఫిక్స్‌చర్‌ను భద్రపరచండి: Use the provided screws and Allen key to secure the top ring of the fixture, if applicable, or ensure the fixture is firmly seated in the ground.
7. పరీక్ష: Once all connections are secure and waterproofed, restore power and test the lights.

Image: Illustration demonstrating the connection process for Ledvion ground spots, showing an installation cable, IP68 T-connector, and IP68 waterproof connector for extending the wiring.

Image: Three Ledvion ground spots illuminating a garden lawn, demonstrating typical outdoor placement.

Image: Ledvion ground spots installed along a curved garden pathway, providing ambient lighting.

ఆపరేటింగ్ సూచనలు

Once properly installed and connected to the power supply, the Ledvion ground spots operate simply:

• పవర్ ఆన్/ఆఫ్: Control the lights using the main switch connected to your outdoor lighting circuit.
• ఆటోమేటిక్ ఆపరేషన్: For automatic operation, connect the ground spots to an external timer or a dusk-to-dawn sensor (not included).

నిర్వహణ

Regular maintenance ensures optimal performance and longevity of your Ledvion ground spots.

• శుభ్రపరచడం: Periodically clean the tempered glass surface to remove dirt, leaves, or debris that may obstruct light output. Use a soft, damp cloth and mild detergent if necessary. Avoid abrasive cleaners.
• తనిఖీ: Regularly inspect the fixtures and cables for any signs of damage, wear, or loose connections. Address any issues promptly to maintain the IP67 rating.
• బల్బ్ భర్తీ: To replace a GU10 bulb, ensure the power is off. Carefully remove the top ring of the fixture (if applicable) or access the bulb compartment. Twist and pull out the old bulb, then insert the new GU10 bulb by aligning the pins and twisting to secure. Ensure the replacement bulb does not exceed 15W.
• మన్నిక: The stainless steel construction and tempered glass are designed for long-lasting outdoor use, offering anti-rust and anti-moisture properties.

Image: A close-up of the ground spot in wet grass, emphasizing its IP67 water and dust resistant rating, along with anti-rust and anti-moisture features.

చిత్రం: క్లోజప్ view of the ground spot's interior, indicating compatibility with any GU10 spot up to a maximum of 15 watts.

ట్రబుల్షూటింగ్

వారంటీ మరియు మద్దతు

Ledvion products are manufactured with high-quality materials and craftsmanship. This product comes with a 3 సంవత్సరాల వారంటీ కొనుగోలు తేదీ నుండి, పదార్థాలు మరియు పనితనంలో లోపాలను కవర్ చేస్తుంది.

Image: Ledvion ground spot highlighting a "3 YEAR WARRANTY" badge, emphasizing its stainless steel construction and tempered glass for long-lasting use, with anti-rust and corrosion resistance.

వారంటీ క్లెయిమ్‌లు: In case of a warranty claim, please contact your original point of purchase or Ledvion customer support directly. Keep your proof of purchase for warranty validation.

సంప్రదింపు సమాచారం:
Tecvion B.V.
Hogebrink 2020
3871 KB Hoevelaken
నెదర్లాండ్స్

ఉత్పత్తికి ఏవైనా అనధికారిక మార్పులు లేదా సవరణలు వారంటీని రద్దు చేస్తాయి.