ATsafepro Digital Torque Adapter 1/2'' 17-340 Nm User Manual

1. పరిచయం

The ATsafepro Digital Torque Adapter transforms any standard ratchet wrench into a precise digital torque wrench. Designed for accuracy and ease of use, this adapter provides reliable torque measurements for a wide range of applications, including automotive, motorcycle, and bicycle maintenance.

ఏమి చేర్చబడింది

• 1 × 1/2" Digital Torque Adapter (17-340 Nm / 12.5-250.7 ft-lb)
• 1 × 3/8" Adapter
• 1 × 1/4" Adapter
• 1 × స్క్రూడ్రైవర్

2 కీ ఫీచర్లు

• Dual Direction Torque Measurement: Measures torque with ±2% accuracy in both clockwise and counter-clockwise directions.
• బహుళ-యూనిట్ మార్పిడి: Supports 5 units: Newton-meters (Nm), foot-pounds (ft-lb), inch-pounds (in-lb), kilogram-centimeters (kg-cm), and kilogram-meters (kg-m).
• డ్యూయల్ అలారం సిస్టమ్: Features a beep and LED flash to warn when the target torque is approached, preventing overtightening.
• 2 డిస్ప్లే మోడ్‌లు: Offers Peak mode for maximum torque achieved and Track mode for real-time torque display.
• Preset and Data Storage: Allows pre-setting 9 torque values (P1-P9) and storing up to 500 torque values for later review.

3. సెటప్ సూచనలు

బ్యాటరీ సంస్థాపన

The digital torque adapter requires batteries for operation. Locate the battery compartment, typically on the back or side of the unit. Insert the required batteries (usually AAA, refer to the compartment label if unsure) ensuring correct polarity. Close the battery compartment securely.

Attaching the Adapter to a Ratchet Wrench

The ATsafepro Digital Torque Adapter is designed to be used with a standard ratchet wrench. It features a 1/2" drive. If your ratchet wrench has a different drive size, use the included 3/8" or 1/4" adapters.

1. Select the appropriate adapter (1/2", 3/8", or 1/4") for your ratchet wrench.
2. Insert the adapter into the square drive of your ratchet wrench.
3. Attach the ATsafepro Digital Torque Adapter to the selected adapter or directly to the 1/2" drive of your ratchet wrench. Ensure it is securely seated.
4. Attach the socket or bit required for your task to the output square drive of the digital torque adapter.

4. Operating the Digital Torque Adapter

ప్రాథమిక ఆపరేషన్

• పవర్ ఆన్/ఆఫ్: క్లుప్తంగా నొక్కండి C button to turn the unit on. Long press the C దాన్ని ఆపివేయడానికి బటన్.
• మోడ్ ఎంపిక: నొక్కండి P / T మధ్య మారడానికి బటన్ శిఖరం mode (displays the maximum torque applied) and ట్రాక్ చేయండి mode (displays real-time torque).
• యూనిట్ మార్పిడి: నొక్కండి U button to cycle through the available torque units: Nm, ft-lb, in-lb, kg-cm, and kg-m.

Setting Target Torque (Preset Values P1-P9)

The adapter allows you to pre-set up to 9 target torque values for repetitive tasks.

1. నొక్కండి M button to enter the preset setting mode.
2. ఉపయోగించండి ▲ ▲ తెలుగు (పైకి) మరియు ▼ (Down) buttons to select a preset slot (P1-P9).
3. నొక్కండి M button again to confirm the selected slot.
4. ఉపయోగించండి ▲ ▲ తెలుగు మరియు ▼ buttons to adjust the target torque value.
5. నొక్కండి M button once more to save the set value.

Torque Measurement and Alarm System

When applying torque, the adapter provides visual and audible alerts as you approach your target torque value.

• At 80% of the target torque, a green LED will light up, accompanied by an intermittent beep.
• At 90% of the target torque, a yellow LED will light up, accompanied by an intermittent beep.
• At 100% of the target torque, a red LED will light up, accompanied by a constant beep.

This dual alarm system helps prevent overtightening and ensures precise application of torque.

5. నిర్వహణ

క్లీనింగ్

To ensure the longevity and accuracy of your digital torque adapter, keep it clean. Wipe the unit with a soft, dry cloth after each use. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the display or housing.

నిల్వ

Store the adapter in its protective case when not in use. Keep it in a dry environment, away from direct sunlight, extreme temperatures, and high humidity. Remove batteries if the unit will not be used for an extended period to prevent leakage.

బ్యాటరీ భర్తీ

When the battery level indicator shows low power, replace the batteries promptly. Always use new batteries of the specified type and ensure correct polarity during installation.

6. ట్రబుల్షూటింగ్

సాధారణ సమస్యలు

• యూనిట్ పవర్ ఆన్ చేయదు:
  • సరైన ధ్రువణతతో బ్యాటరీలు సరిగ్గా ఇన్‌స్టాల్ చేయబడ్డాయో లేదో తనిఖీ చేయండి.
  • తాజా బ్యాటరీలతో భర్తీ చేయండి.
  • Ensure the power button (C) is pressed briefly to turn on.
• సరికాని రీడింగ్‌లు:
  • Ensure the adapter is securely attached to the ratchet wrench and the socket.
  • Verify that the correct unit of measurement is selected.
  • Avoid applying force unevenly or at an angle.
  • The adapter is factory calibrated. If persistent inaccuracy is suspected, contact customer support.
• డిస్‌ప్లే సమస్యలు (ఉదా., ఖాళీ, మినుకుమినుకుమనేవి):
  • బ్యాటరీ స్థాయిని తనిఖీ చేయండి మరియు తక్కువగా ఉంటే మార్చండి.
  • Ensure the unit is not exposed to extreme temperatures.

7. సాంకేతిక లక్షణాలు

8. వారంటీ మరియు కస్టమర్ మద్దతు

For warranty information, please refer to the documentation included with your purchase or contact the seller directly. If you encounter any issues or have questions regarding the ATsafepro Digital Torque Adapter, please reach out to ATsafepro customer support through the retailer where the product was purchased.