1. ఉత్పత్తి ముగిసిందిview
This manual provides detailed instructions for the GODIYMODULES 2.25 Inch TFT LCD Display Module. This module features a 2.25-inch color screen with a resolution of 76x284 pixels, driven by the ST7789 controller, and communicates via a Serial Peripheral Interface (SPI).
It is designed for integration into various electronic projects requiring a compact, high-resolution display.
మూర్తి 1: ముందు view of the 2.25 Inch TFT LCD Display Module with included pin headers.
2. స్పెసిఫికేషన్లు
Key technical specifications for the 2.25 Inch TFT LCD Display Module are listed below:
Figure 2: Detailed pinout and specifications table.
| ఫీచర్ | వివరణ |
|---|---|
| LCD పరిమాణం | 2.25 అంగుళాలు |
| రిజల్యూషన్ | 76(H) x 284(V) పిక్సెల్లు |
| ప్రదర్శన మోడ్ | సాధారణంగా తెలుపు |
| డ్రైవర్ IC | ST7789 |
| ఇంటర్ఫేస్ | 4-Line SPI |
| వాల్యూమ్tagఇ పరిధి | 3 - 3.5 వి |
| పిక్సెల్ పిచ్ | 0.1947(H) x 0.1947(V) mm |
| క్రియాశీల ప్రాంతం | 14.7972(H) x 55.2948(V) mm |
| మాడ్యూల్ పరిమాణం | 30.0(H) x 63.0(V) x 3.76(D) mm |
| పిక్సెల్ అమరిక | RGB నిలువు గీత |
| ప్రకాశం | 600 (TYP) Cd/m2 |
| Viewదిశలో | 12 O'clock (Best image) |
| బ్యాక్లైట్ | 4 వైట్ LED సమాంతర |
| ఆపరేటింగ్ ఉష్ణోగ్రత | -20°C ~ +70°C |
| నిల్వ ఉష్ణోగ్రత | -30°C ~ +80°C |
3. సెటప్ మరియు కనెక్షన్
The display module uses an SPI interface for communication. Ensure your microcontroller or development board supports SPI and provides the necessary voltagఇ స్థాయిలు.
3.1 పిన్ వివరణ
Refer to the pinout diagram for correct connections. The module operates within a voltage పరిధి 3V నుండి 3.5V.
Figure 3: Pinout diagram with descriptions.
- GND: Power ground pin.
- VCC: Power supply positive, voltagఇ పరిధి: 3 - 3.5V.
- SCL: SPI clock pin.
- SDA: SPI data pin.
- RES: Display reset pin, active low.
- DC: Data or display command selection pin.
- CS: Chip select for driver chip, active low.
- BLK: Backlight control switch, default on, active low to turn off backlight.
3.2 కనెక్షన్ విధానం
- Connect the GND pin of the module to the ground of your microcontroller.
- Connect the VCC pin to a stable 3V-3.5V power supply.
- Connect SCL, SDA, RES, DC, CS, and BLK pins to the corresponding SPI and control pins on your microcontroller. Refer to your microcontroller's documentation for specific SPI pin assignments.
- Ensure all connections are secure to prevent intermittent operation.
4. ఆపరేటింగ్ సూచనలు
Once the module is correctly wired, software configuration is required to initialize and control the display.
4.1 Software Initialization
- Utilize a library compatible with the ST7789 driver for your chosen programming environment (e.g., Arduino, MicroPython, LVGL).
- Initialize the SPI communication protocol, specifying the correct clock speed and data mode.
- Send initialization commands to the ST7789 driver as per its datasheet or library documentation. This typically involves setting display orientation, pixel format, and enabling the display.
4.2 కంటెంట్ను ప్రదర్శించడం
- Use the display library functions to draw graphics, text, and images.
- The display supports 262K colors. Ensure your image data is formatted correctly for the ST7789 controller.
- For optimal color representation, it may be necessary to invert color data bits in your software configuration if colors appear incorrect or "funky".
5. నిర్వహణ
Proper care ensures the longevity and performance of your display module.
- శుభ్రపరచడం: Gently wipe the display surface with a soft, lint-free cloth. Avoid abrasive materials or harsh chemical cleaners.
- నిర్వహణ: Avoid applying excessive pressure to the display surface. Handle the module by its edges to prevent damage to the screen or components.
- నిల్వ: Store the module in a dry, dust-free environment within the specified storage temperature range (-30°C to +80°C).
- శక్తి: Always ensure the power supply is within the specified 3V-3.5V range. Over-voltage మాడ్యూల్ను దెబ్బతీస్తుంది.
6. ట్రబుల్షూటింగ్
If you encounter issues with your display module, consider the following troubleshooting steps:
- డిస్ప్లే లేదు/ఖాళీ స్క్రీన్:
- Verify all power connections (VCC, GND) are correct and within the 3V-3.5V range.
- Check SPI connections (SCL, SDA, CS, DC, RES) for continuity and correct pin assignment.
- Ensure the BLK pin is not active low (turned off). If connected, try setting it high or leaving it unconnected if default-on is desired.
- Confirm that the ST7789 driver is correctly initialized in your software.
- Incorrect or "Funky" Colors:
- As noted by users, you may need to invert color data bits in your display library or driver configuration. This is a common requirement for some ST7789 implementations.
- Ensure your image or color data is in the correct format (e.g., RGB565, RGB888) expected by the driver.
- ఫ్లికరింగ్ డిస్ప్లే:
- Check the SPI clock speed. A speed that is too high or too low for your microcontroller or wiring can cause issues.
- Ensure power supply is stable and free from noise.
- Difficulty in Setup:
- Refer to online resources and community forums for ST7789 and SPI display examples with your specific microcontroller.
- Double-check all wiring against the pinout diagram.
7. వారంటీ సమాచారం
The GODIYMODULES 2.25 Inch TFT LCD Display Module is covered by the manufacturer's standard warranty. For specific details regarding warranty duration, terms, and conditions, please refer to the documentation provided at the time of purchase or contact GODIYMODULES directly.
Typically, warranty covers defects in materials and workmanship under normal use. Damage resulting from improper installation, misuse, or unauthorized modifications is generally not covered.
8. మద్దతు
For technical assistance, additional documentation, or inquiries not covered in this manual, please contact the seller or GODIYMODULES customer support. When contacting support, please provide your product model number and a detailed description of the issue.
You may also find helpful resources and community support online for projects involving ST7789-based SPI displays.