AWithZ P20B 14.5KW SuperCapacitor Spot Welder

1. భద్రతా సమాచారం

Please read and understand all safety warnings and instructions before operating the AWithZ P20B Spot Welder. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• కంటి రక్షణ: Always wear appropriate eye protection (e.g., welding goggles or a welding helmet) to shield your eyes from sparks and intense light during welding operations.
• వెంటిలేషన్: Ensure adequate ventilation in your workspace to disperse fumes and gases produced during welding.
• విద్యుత్ భద్రత: Do not operate the welder in wet conditions. Ensure the power supply is correctly grounded. Avoid touching live electrical parts.
• బ్యాటరీ హ్యాండ్లింగ్: Exercise caution when working with batteries. Lithium batteries can be volatile if mishandled. Do not short-circuit batteries.
• మండే పదార్థాలు: వెల్డింగ్ ప్రాంతం నుండి మండే పదార్థాలను దూరంగా ఉంచండి.
• పిల్లలు మరియు పెంపుడు జంతువులు: పరికరం మరియు అన్ని ఉపకరణాలను పిల్లలు మరియు పెంపుడు జంతువులకు దూరంగా ఉంచండి.

2. ఉత్పత్తి ముగిసిందిview

The AWithZ P20B is a 14.5KW SuperCapacitor Spot Welder designed for efficient and precise welding of various battery types and metal sheets. It features both automatic and foot pedal operating modes, along with a wide range of adjustable settings.

చేర్చబడిన భాగాలు:

• P20B Spot Welding Machine
• 15A ఛార్జర్
• Foot Pedal (2m long)
• 3 Pairs of Replacement Welding Pins
• 5-meter Nickel Plated Sheet (0.15mm thickness)
• 18650 బ్యాటరీ హోల్డర్
• File
• ఇన్స్ట్రక్షన్ మాన్యువల్

The main unit features a clear display and intuitive controls for adjusting welding parameters. The flexible welding pens allow for precise application, and the foot pedal provides enhanced control for intricate tasks.

3. సెటప్ సూచనలు

Follow these steps to set up your AWithZ P20B Spot Welder for first use:

1. అన్‌బాక్సింగ్: ప్యాకేజింగ్ నుండి అన్ని భాగాలను జాగ్రత్తగా తొలగించండి. ఏదైనా నష్టం జరిగిందో లేదో తనిఖీ చేయండి.
2. Connect Welding Pens: Insert the welding pens into the designated ports on the front panel of the spot welder. Ensure a secure connection.
3. Connect Foot Pedal (Optional): If using the foot pedal mode, connect the foot pedal cable to the 'Trigger Interface' port.
4. Initial Activation/Charging: Connect the spot welder to a 100-240V AC power supply using the provided 15A charger. The device requires approximately 5 minutes of charging to reach an 'OK' state for spot welding, indicated on the display screen.
5. Prepare Welding Tips: Ensure the welding pins are clean and sharp. Use the provided file to sharpen them if necessary.

4. ఆపరేటింగ్ సూచనలు

The AWithZ P20B offers flexible operation modes and precise control over welding parameters.

4.1. Selecting Welding Mode

The device supports two primary welding modes:

• ఆటోమేటిక్ మోడ్: Once the appropriate gear is selected, the device will automatically trigger a weld when the welding pens make contact with the material.
• Foot Pedal Mode: Provides manual control over the welding trigger. Step on the foot pedal to initiate a weld. This mode is ideal for precise positioning.

4.2. Adjusting Welding Parameters

The P20B features 999 adjustable gears, allowing fine-tuning for various materials and thicknesses. Parameters such as preheating time, interval, and continuous spot welding count can also be adjusted via the control panel.

• గేర్ సర్దుబాటు: Use the 'P-' and 'P+' buttons on the control panel to increase or decrease the welding power (gear).
• మెటీరియల్ అనుకూలత: The welder is suitable for materials such as 0.6mm nickel plated sheet, 0.6mm stainless steel sheet, 0.6mm iron sheet, 0.3mm pure nickel sheet, and 0.2mm copper sheet. Adjust the gear setting according to the material and thickness.

4.3. వెల్డింగ్ ప్రక్రియ

Place the material to be welded on a stable, non-conductive surface. Position the welding pens firmly on the contact points. Initiate the weld using either the automatic trigger or the foot pedal, depending on your selected mode. Observe the weld quality and adjust settings as needed.

4.4. బ్యాటరీ స్థితి

The device features a battery indicator on its display. It is recommended to keep the internal supercapacitors charged for optimal performance. The unit is powered by built-in super energy storage capacitors, not user-replaceable batteries for power.

5. నిర్వహణ

క్రమం తప్పకుండా నిర్వహణ మీ స్పాట్ వెల్డర్ యొక్క దీర్ఘాయువు మరియు సరైన పనితీరును నిర్ధారిస్తుంది.

• Welding Pin Replacement: The welding pens are designed with replaceable pins. If the pins become worn or damaged, gently pull them out and insert new ones. Three pairs of replacement pins are included.
• Pin Sharpening: అందించిన వాటిని ఉపయోగించండి file to sharpen the tips of the welding pins when they become dull. This maintains welding precision.
• శుభ్రపరచడం: Keep the device and welding pens clean and free from debris. Use a dry cloth for cleaning.

6. ట్రబుల్షూటింగ్

If you encounter issues with your AWithZ P20B Spot Welder, refer to the following common troubleshooting tips:

• శక్తి లేదు: Ensure the charger is properly connected to both the device and a working power outlet. Check the power switch.
• No Weld Output: Verify that the welding pens are securely connected. Check the selected welding mode and gear settings. Ensure the device has completed its initial activation (displaying 'OK').
• పేలవమైన వెల్డింగ్ నాణ్యత: Adjust the gear setting to match the material and thickness. Ensure welding pins are clean and sharp. Apply consistent pressure during welding.
• వేడెక్కడం: While designed for stable operation, continuous high-gear use may cause the welding pen leads to warm up. Allow the device to cool down if excessive heat is observed.

7. స్పెసిఫికేషన్లు

8. అధికారిక ఉత్పత్తి వీడియో

For a visual guide on the product's features and operation, please watch the official video below:

9. వారంటీ మరియు మద్దతు

For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official AWithZ webవారంటీ క్లెయిమ్‌ల కోసం కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదును ఉంచండి.