మాన్యువల్లు+

ఫ్రిక్‌పార్ట్-074863

ఇన్స్ట్రక్షన్ మాన్యువల్

Kenmore 11029133413 Washer Lid Lock Latch Replacement Part

బ్రాండ్: సాధారణ | మోడల్: ఫ్రిక్‌పార్ట్-074863

పరిచయం

This manual provides essential instructions for the installation, operation, and maintenance of the Fricparts replacement lid lock latch for Kenmore 11029133413 washing machines. Please read this manual thoroughly before proceeding with installation to ensure safe and correct usage.

భద్రతా సమాచారం

  • పవర్ డిస్‌కనెక్ట్ చేయండి: Always unplug the washing machine from the electrical outlet before attempting any repairs or maintenance. Failure to do so can result in electric shock or serious injury.
  • రక్షణ గేర్ ధరించండి: Use appropriate personal protective equipment, such as gloves, to prevent injury.
  • వృత్తిపరమైన సహాయం: ఏదైనా దశ గురించి మీకు ఖచ్చితంగా తెలియకపోతే లేదా మరమ్మత్తు చేయడంలో అసౌకర్యంగా ఉంటే, అర్హత కలిగిన ఉపకరణాల సాంకేతిక నిపుణుడిని సంప్రదించండి.
  • జాగ్రత్తగా నిర్వహించండి: Appliance parts can have sharp edges. Handle all components carefully.

ప్యాకేజీ విషయాలు

  • 1 x Kenmore 11029133413 Washer Lid Lock Latch Replacement Part (Fricpart-074863)

అనుకూలత

This replacement part is specifically designed for Kenmore washing machine model 11029133413. Verify your washer's model number before installation to ensure proper fit and function. Appliance parts can appear similar; confirming the model number is crucial.

సెటప్ మరియు ఇన్‌స్టాలేషన్

Follow these steps carefully to replace the washer lid lock latch:

  1. వాషర్ సిద్ధం చేయండి:
    • Unplug the washing machine from the power outlet.
    • ఉతికే యంత్రానికి నీటి సరఫరాను ఆపివేయండి.
    • Move the washer away from the wall to allow access to the rear and top.
  2. Access the Lid Lock:
    • Depending on your specific Kenmore model, you may need to remove the control panel or the entire top panel of the washer. Typically, the control panel can be lifted or unclipped, and the top panel may have screws at the rear or clips at the front. Refer to your washer's service manual for exact panel removal instructions.
    • Locate the existing lid lock latch assembly, usually mounted near the front edge of the washer opening.
  3. Disconnect the Old Latch:
    • Carefully disconnect the electrical wiring harness from the old lid lock latch. There is usually a tab or clip that needs to be pressed to release the connector.
    • Remove any screws or clips securing the old lid lock latch to the washer frame.
    • Gently remove the old lid lock latch assembly.
  4. Install the New Latch:
    • Position the new Fricparts lid lock latch replacement part in the same location as the old one.
    • Secure it with the screws or clips that were removed earlier. Ensure it is firmly seated and aligned correctly.
    • Connect the electrical wiring harness to the new lid lock latch. Make sure the connector clicks into place securely.
  5. తిరిగి అమర్చి పరీక్షించండి:
    • Carefully reattach the control panel or top panel of the washer. Ensure all screws and clips are reinstalled.
    • Plug the washing machine back into the electrical outlet.
    • నీటి సరఫరాను ఆన్ చేయండి.
    • Perform a test cycle to ensure the lid lock latch functions correctly. The lid should lock when the cycle starts and unlock when the cycle is complete or paused.
Kenmore 11029133413 Washer Lid Lock Latch Replacement Part

Image: The Fricparts replacement lid lock latch assembly for Kenmore 11029133413 washers. This image displays the complete replacement lid lock latch assembly, featuring the white plastic latch mechanism connected to a gray wiring harness with a multi-pin connector at the end.

ఆపరేటింగ్ సూచనలు

The lid lock latch is an integral safety component of your washing machine. Its operation is automatic:

  • When a wash cycle begins, the lid lock latch engages, preventing the lid from being opened during agitation and spin cycles. This ensures user safety and prevents water spillage.
  • The lid will remain locked until the cycle is complete or paused, and the internal components have come to a stop.
  • If the lid fails to lock, the washer will typically not start or will display an error code.

నిర్వహణ

The lid lock latch is a sealed unit and generally requires no specific maintenance. However, to ensure its longevity and proper function:

  • Keep the area around the lid lock mechanism clean and free of debris, lint, or detergent residue.
  • Avoid forcing the washer lid open when the lock is engaged.
  • Regularly inspect the wiring harness for any signs of wear or damage.

ట్రబుల్షూటింగ్

సమస్యసాధ్యమైన కారణంపరిష్కారం
Lid does not lock, washer won't start.Faulty lid lock latch, disconnected wiring, or obstruction.
  • Check for any obstructions preventing the lid from closing fully.
  • Inspect the wiring harness connection to the lid lock latch.
  • If the latch is new and correctly installed, it may be defective and require replacement.
Lid remains locked after cycle completion.Lid lock latch malfunction or control board issue.
  • Unplug the washer for 5 minutes, then plug it back in to reset the control board.
  • If the issue persists, the lid lock latch or the main control board may need replacement.
Error code related to lid lock.Lid lock latch failure.
  • Consult your washer's user manual for specific error code meanings.
  • Often indicates a need to replace the lid lock latch.

స్పెసిఫికేషన్లు

  • పార్ట్ నంబర్: FRIC-PL-APP-TP-22052025-090779 పరిచయం
  • అంశం మోడల్ సంఖ్య: ఫ్రిక్‌పార్ట్-074863
  • తయారీదారు: ఫ్రిక్‌పార్ట్స్
  • రంగు: Black/White (referring to wiring/housing)
  • పరిమాణం: 1 ముక్క
  • అనుకూలత: Kenmore 11029133413 Washer

వారంటీ మరియు మద్దతు

Information regarding specific warranty terms for this replacement part is not provided in the product details. For warranty inquiries or technical support, please contact the seller or manufacturer directly. Ensure you retain your purchase receipt for any warranty claims.

పత్రాలు - ఫ్రిక్‌పార్ట్-074863 – ఫ్రిక్‌పార్ట్-074863

సంబంధిత పత్రాలు లేవు