1. ఉత్పత్తి ముగిసిందిview
The KIMISS GPS Navigation Phone Holder Stand is a high-strength CNC aluminum alloy extension bracket designed to securely mount your GPS device or smartphone on compatible motorcycles. This product enhances navigation visibility and ensures device stability during rides.
ముఖ్య లక్షణాలు:
- మెరుగైన భద్రత: Elevates your navigation device for optimal viewing, reducing the need to look down.
- సురక్షిత పట్టు: Provides a firm hold, keeping devices stable even on rough terrains.
- Premium Durability: Constructed from high-strength CNC machined aluminum alloy for long-lasting use.
- యూనివర్సల్ అనుకూలత: Designed to work with most smartphone mounts and GPS units.
- Vehicle Specific Fitment: Specifically designed as a replacement for 450 MT models from 2024 to 2025.
2. ప్యాకేజీ విషయాలు
దయచేసి ఇన్స్టాలేషన్తో కొనసాగే ముందు అన్ని భాగాలు ఉన్నాయని మరియు దెబ్బతినకుండా ఉన్నాయని ధృవీకరించండి.
- 1 x Mounting Bracket Kit (3 pieces)
- 1 x క్రాస్ బార్
- 8 x Accessories (screws, washers, etc.)
Image: All components of the KIMISS GPS Navigation Phone Holder Stand kit, including the main mounting plate, two side arms, a cylindrical crossbar, and various screws for assembly.
3. సెటప్ మరియు ఇన్స్టాలేషన్
This section provides step-by-step instructions for installing the KIMISS GPS Navigation Phone Holder Stand on your 450 MT motorcycle. Ensure the motorcycle is stable and turned off before beginning installation.
3.1 అవసరమైన సాధనాలు (చేర్చబడలేదు)
- Appropriate Allen wrenches or screwdrivers for your motorcycle's existing handlebar/dashboard bolts.
- Torque wrench (recommended for proper tightening).
3.2 సంస్థాపనా దశలు
- మౌంటు స్థానాన్ని గుర్తించండి: Locate the appropriate mounting points on your 450 MT motorcycle's dashboard or handlebar area. This bracket is designed to integrate with existing structures.
- Attach Main Mounting Plate: Secure the main mounting plate (the largest flat piece with multiple holes) to the designated area on your motorcycle using the provided screws or existing hardware, if compatible. Ensure it is firmly attached and does not wobble.
Image: The main mounting plate, a flat, rectangular piece with several screw holes, which forms the base of the phone holder stand.
- Install Side Arms: Attach the two smaller, angled side arms to the main mounting plate. These arms typically connect to the outer holes of the main plate. Use the appropriate screws from the accessories kit.
Image: Two identical, angled side arms with mounting holes, designed to extend upwards from the main plate.
- Mount the Crossbar: Connect the cylindrical crossbar between the two installed side arms. This crossbar provides the attachment point for your GPS or smartphone holder. Ensure all connections are tight.
Image: The main mounting plate, side arms, and crossbar assembled together, showing the complete structure of the phone holder stand.
- తుది బిగింపు: Double-check all screws and bolts to ensure they are securely tightened. Avoid over-tightening, which can strip threads or damage components.
గమనిక: For optimal safety, it is recommended to have the installation performed by a qualified mechanic if you are unsure about any steps.
4. ఆపరేటింగ్ సూచనలు
Once the KIMISS GPS Navigation Phone Holder Stand is securely installed, you can attach your preferred GPS device or smartphone holder to the crossbar.
- Attach Device Holder: Mount your existing smartphone or GPS holder onto the newly installed crossbar. Most universal holders are compatible with a 22mm diameter bar.
- సురక్షిత పరికరం: Place your smartphone or GPS device into its holder, ensuring it is firmly gripped. Adjust the viewing angle for optimal visibility without obstructing your view of the road or motorcycle instruments.
- ప్రయాణానికి ముందు తనిఖీ: Before each ride, gently tug on the device and its holder to confirm it is securely attached and will not vibrate loose during operation.
The elevated position of the holder is designed to improve your line of sight to the navigation screen, contributing to a safer riding experience.
5. నిర్వహణ
The KIMISS GPS Navigation Phone Holder Stand is constructed from durable aluminum alloy and requires minimal maintenance.
- రెగ్యులర్ క్లీనింగ్: Wipe the bracket with a soft, damp దుమ్ము మరియు ధూళిని తొలగించడానికి వస్త్రం. ముగింపును దెబ్బతీసే రాపిడి క్లీనర్లు లేదా ద్రావకాలను నివారించండి.
- ఫాస్టెనర్లను తనిఖీ చేయండి: Periodically inspect all screws and bolts for tightness. Vibrations from riding can sometimes loosen fasteners over time. Re-tighten as necessary, but do not over-tighten.
- నష్టం కోసం తనిఖీ చేయండి: Regularly check the aluminum alloy components for any signs of cracks, bends, or corrosion. If damage is observed, replace the affected parts immediately to ensure safety.
6. ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| Holder feels loose or wobbly after installation. | Screws or bolts are not sufficiently tightened. | Re-tighten all mounting screws and bolts. Ensure they are snug but do not over-tighten. |
| Device holder does not fit on the crossbar. | Incompatible device holder size. | Verify your device holder is compatible with a 22mm diameter crossbar. Consider purchasing a compatible holder if necessary. |
| Bracket interferes with motorcycle controls or view. | Incorrect mounting position or angle. | Review installation steps. Adjust the bracket's position or the device holder's angle to ensure clear visibility and access to controls. |
7. స్పెసిఫికేషన్లు
| ఫీచర్ | వివరాలు |
|---|---|
| బ్రాండ్ | KIMISS |
| మెటీరియల్ | High Strength CNC Machined Aluminum Alloy |
| అమరిక | Replacement for 450 MT 2024 2025 |
| Crossbar Diameter | 22మి.మీ |
| ASIN | B0G1KX1FF8 |
8. వారంటీ మరియు మద్దతు
Information regarding specific warranty terms or direct customer support contacts for this product is not provided in the available documentation. For warranty claims or technical assistance, please refer to the retailer or the official KIMISS webఉత్పత్తి కొనుగోలు చేయబడిన సైట్.
మీరు వీటిని కూడా సందర్శించవచ్చు KIMISS Store on Amazon మరింత ఉత్పత్తి సమాచారం కోసం.