SUNLU AMS Heater Instruction Manual

1. పరిచయం

The SUNLU AMS Heater is designed to enhance your 3D printing experience by providing efficient filament drying directly within your Bambu Lab AMS Gen 1. This device allows for simultaneous drying and printing, ensuring optimal filament condition and improving print quality. It integrates seamlessly with your existing AMS setup, offering smart humidity control and a triple-safe heating system.

2. భద్రతా సమాచారం

• విద్యుత్ భద్రత: Always ensure the device is unplugged before performing any maintenance or installation. Do not operate with wet hands.
• వేడి హెచ్చరిక: The heater reaches temperatures up to 70°C. Avoid direct contact with heating elements during operation. Allow the device to cool down before handling.
• వెంటిలేషన్: Ensure adequate ventilation around the AMS Heater, especially during heavy drying cycles, to allow moisture to escape.
• ప్లేస్‌మెంట్: Place the device on a stable, heat-resistant surface.
• జాగ్రత్త: ఎలెక్ట్రిక్ షాక్ ప్రమాదం. యూనిట్‌ను విడదీయవద్దు. అన్ని సర్వీసింగ్‌లను అర్హత కలిగిన సిబ్బందికి సూచించండి.

3. ప్యాకేజీ విషయాలు

ప్యాకేజీలో అన్ని అంశాలు ఉన్నాయని నిర్ధారించుకోండి:

• SUNLU AMS Heater x 1
• కీలు x 4
• Hexagonal Screws x 8
• పవర్ కార్డ్ x 1
• వినియోగదారు మాన్యువల్ x 1
• Hexagonal Screwdriver x 1

The image above displays the complete list of items you should find in your SUNLU AMS Heater package. Please check against this list to ensure all components are present before proceeding with installation.

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

The SUNLU AMS Heater is designed for easy, 3-step installation as a drop-in replacement for the original Bambu Lab AMS Gen 1 top cover. No drilling or permanent modifications are required.

1. Loosen Original Screws: Unscrew the four hinge screws on your Bambu Lab AMS Gen 1 and carefully remove the original top cover.
2. కీలు ఇన్స్టాల్: Mount the provided hinges onto the side pins of the SUNLU AMS Heater.
3. సెక్యూర్ హీటర్: Place the SUNLU AMS Heater onto the AMS unit, aligning the hinges. Secure it by tightening the four screws.

The installation process is straightforward. A magnetic screwdriver is recommended for easier handling of the small screws. Once installed, connect the power cord to the heater unit and plug it into a suitable power outlet.

5. ఆపరేటింగ్ సూచనలు

5.1 పవర్ ఆన్/ఆఫ్

After connecting the power cord, press the power button on the control panel to turn the device on or off.

5.2 Setting Temperature and Humidity

The AMS Heater features an intelligent interface for easy adjustment of drying parameters. Use the 'SET' button to cycle through settings and the up/down arrows to adjust values for temperature (PV), relative humidity (RH), and set value (SV).

The device offers presets for different 3D filament types, simplifying the setup process.

5.3 Intelligent Humidity Control

The AMS Heater automatically starts heating when the humidity inside the chamber rises to a preset value (e.g., ≥ 50%). It stops heating once the humidity drops to a desired low level (e.g., ≤ 20%), ensuring optimal drying without over-drying.

This feature ensures your filament remains at ideal moisture levels for consistent print quality.

5.4 Manual Air Outlet

The device includes a manual air outlet. This can be used to release excess moisture, especially during intensive drying operations. Simply slide the cover to open or close the vents.

6 కీ ఫీచర్లు

• Dry While You Print: The AMS Heater allows for simultaneous filament drying and 3D printing, saving time and ensuring optimal material condition throughout your print job.
• అధిక అనుకూలత: Specifically designed for Bambu Lab AMS Gen 1, it maintains multi-color printing capabilities and sealed storage. Its flat top design also allows for stacking multiple units to save space.
• సమర్థవంతమైన తాపన: The heater can reach 70°C in approximately 20 minutes, providing rapid and even heat distribution for effective drying of most common filaments.



• Unique Air Duct Design: An innovative air duct system confines heat circulation to the filament area, protecting the AMS feeding motor from high temperatures and ensuring its longevity.



• Triple-Safe Heating: Incorporates a PTC heater, a metal-roller fan, a secondary thermal cutoff, and smart software controls for precise heating and enhanced safety.



• 4-Spool Capacity: Designed to work with your complete AMS, allowing you to dry and utilize all four filament spools simultaneously for maximum efficiency.

7. నిర్వహణ

• శుభ్రపరచడం: Regularly wipe the exterior of the AMS Heater with a soft, dry cloth. Ensure the device is unplugged and cool before cleaning. Do not use abrasive cleaners or solvents.
• వెంటిలేషన్ పోర్టులు: Keep the air inlet and outlet ports clear of dust and debris to ensure proper airflow and efficient drying.
• నిల్వ: When not in use for extended periods, store the AMS Heater in a dry, dust-free environment.

8. ట్రబుల్షూటింగ్

8.1 Poor Print Quality (Stringing, Bubbling, Poor Adhesion)

If you experience issues like stringing, bubbling, or poor adhesion in your 3D prints, it is often due to damp filament. The SUNLU AMS Heater is designed to mitigate these problems by ensuring your filament is properly dried.

Ensure the AMS Heater is operating at the recommended temperature and humidity settings for your specific filament type.

8.2 Installation Difficulties (Screws)

Some users have reported difficulty with the small hexagonal screws during installation. Using a magnetic screwdriver can significantly ease the process of handling and securing these screws.

8.3 Fan Noise

The AMS Heater's internal fan may be audible when the lid is open. However, once the lid is closed and the unit is operating, the fan noise is generally quiet. This is normal operation.

9. స్పెసిఫికేషన్లు

10. వారంటీ మరియు మద్దతు

10.1 వారంటీ సమాచారం

The SUNLU AMS Heater comes with a 1 సంవత్సరాల వారంటీ కొనుగోలు చేసిన తేదీ నుండి. ఈ వారంటీ సాధారణ ఉపయోగంలో తయారీ లోపాలు మరియు లోపాలను కవర్ చేస్తుంది. వారంటీ క్లెయిమ్‌ల కోసం దయచేసి మీ కొనుగోలు రుజువును ఉంచుకోండి.

10.2 కస్టమర్ మద్దతు

For technical assistance, troubleshooting, or warranty inquiries, please contact SUNLU customer support through the official website or your retailer. Provide your product model and purchase details for efficient service.