1. పరిచయం
This manual provides detailed instructions for the installation, operation, and maintenance of your Sinotimer Digital Analogue DIN Module Time Switch. This device is designed for industrial applications, offering precise 24-hour programmable timing with a large LCD display and backlight functionality.
2. ఉత్పత్తి విధులు
- Clock display (24-hour format).
- Programmable Timer with up to 96 ON/OFF programs per day.
- Backlight feature: The backlight illuminates when the timer is off and automatically disappears after 5 seconds.
3. స్పెసిఫికేషన్లు
| పరామితి | విలువ |
|---|---|
| మోడల్ సంఖ్యలు | TM929AKL (16A), TM929BKL (30A) |
| విద్యుత్ సరఫరా | 85~265VAC, 50/60Hz |
| Max. Current of Output Load | 16A / 30A (మోడల్ ఆధారంగా) |
| కార్యక్రమాలు | రోజుకు 96 వరకు ఆన్/ఆఫ్ |
| సెట్టింగ్ పరిధి | 15 నిమిషాల నుండి 24 గంటల వరకు |
| కనీస సెట్టింగ్ విరామం | 15 నిమిషాల |
| ప్రదర్శించు | బ్యాక్లైట్తో LCD |
| కొలతలు | 86.5mm x 36mm x 68.5mm |
| సంస్థాపన | 35 ఎంఎం డిఎన్ రైల్ |
| బ్యాటరీ | TM929AKL (16A): Replaceable CR2032; TM929BKL (30A): Non-replaceable internal battery |
| విద్యుత్ వినియోగం | <5VA |
| Black-out (Power Reserve) | 90 రోజులు |
| సర్టిఫికేషన్ | CE |
గమనిక: The TM929AKL (16A) model features a replaceable CR2032 battery, while the TM929BKL (30A) model has a non-replaceable internal battery. Wiring diagrams differ between models.
4. సెటప్
4.1 సంస్థాపన
The time switch is designed for mounting on a standard 35mm DIN rail. Ensure the mounting location is dry, well-ventilated, and free from excessive vibrations or extreme temperatures.
4.2 వైరింగ్
హెచ్చరిక: All wiring should be performed by a qualified electrician and in accordance with local electrical codes. Ensure power is disconnected before attempting any wiring.
The timer has terminals for Line (L), Neutral (N), and output contacts (NO, NC, Common). Refer to the diagrams below for typical wiring configurations.
4.3 ప్రారంభ పవర్-అప్
Once wired correctly, apply power to the device. The LCD will illuminate and display the current time. If the display is blank, check the power supply and, for the 16A model, ensure the CR2032 battery is correctly installed.
5. ఆపరేటింగ్ సూచనలు
The timer features a MENU button, UP/DOWN arrow buttons, an OK button, and a Reset (Res) button.
5.1 ప్రస్తుత సమయాన్ని సెట్ చేయడం
- Press the 'MENU' button.
- Use the 'UP' and 'DOWN' arrow buttons to adjust the hour and minute.
- Press 'OK' to confirm each setting.
- Press 'MENU' again to return to the clock display.
5.2 ఆన్/ఆఫ్ సైకిల్స్ ప్రోగ్రామింగ్
The timer supports up to 96 ON/OFF programs. Each program can be set for specific days of the week.
- Press the 'MENU' button to enter programming mode. The display will show '00:00' or a program number.
- Use 'UP' and 'DOWN' to set the desired ON time (hour and minute). Press 'OK' to confirm.
- Next, set the desired OFF time (hour and minute). Press 'OK' to confirm.
- Use 'UP' and 'DOWN' to select the days of the week for this program (e.g., Mon-Fri, Sat-Sun, or individual days). Press 'OK' to confirm.
- Repeat steps 2-4 for additional programs.
- Press 'MENU' to exit programming mode and save settings.
5.3 మాన్యువల్ ఓవర్రైడ్
To manually switch the timer's output, press the 'OK' button. This will cycle through the modes: ON (always on), AUTO (follows programmed schedule), and OFF (always off).
6. నిర్వహణ
6.1 Battery Replacement (TM929AKL 16A only)
The TM929AKL (16A) model uses a replaceable CR2032 battery. If the display becomes dim or the time settings are lost frequently during power outages, the battery may need replacement. Carefully open the battery compartment and replace the CR2032 battery, ensuring correct polarity. The TM929BKL (30A) model has a non-replaceable internal battery.
6.2 సాధారణ సంరక్షణ
Keep the device clean and dry. Use a soft, dry cloth for cleaning. Avoid using abrasive cleaners or solvents. Ensure the protective cover is closed to prevent dust and moisture ingress.
7. ట్రబుల్షూటింగ్
- ప్రదర్శన ఖాళీగా ఉంది: Check the main power supply. For the 16A model, check the CR2032 battery.
- టైమర్ మారడం లేదు: Verify wiring connections are secure and correct. Ensure the timer is in 'AUTO' mode. Check that programs are set correctly and not conflicting.
- తప్పు సమయం: Reset the timer using the 'Res' button and reprogram the current time.
- Programs not executing: Ensure the timer is in 'AUTO' mode. Check that the ON/OFF times and days are correctly set.
7.1 టైమర్ను రీసెట్ చేయడం
To perform a full reset, press the 'Res' button (usually a small recessed button requiring a pointed object like a pen tip). This will clear all settings and return the timer to its factory default state. You will need to reprogram the current time and all desired ON/OFF cycles.
8 వినియోగదారు చిట్కాలు
- For precise control, utilize the full capacity of 96 ON/OFF programs to manage complex schedules.
- When setting intervals, remember the minimum programmable interval is 15 minutes.
- Always double-check your wiring before applying power to prevent damage to the unit or connected appliances.
9. వారంటీ మరియు మద్దతు
For technical assistance, warranty claims, or further information, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
