TWOTREES Laser Engraving Machine Engraving Area Expansion Kit

1. పరిచయం

This manual provides instructions for installing and using the TWOTREES Laser Engraving Machine Engraving Area Expansion Kit. This kit is designed to upgrade the engraving area of your existing TWOTREES TTS-25 or TTS-55 laser engraving machine from the standard 300x300mm to larger sizes of either 400x420mm or 600x600mm. Expanding your engraving area allows for larger projects and increased versatility.

2. భద్రతా సమాచారం

Always prioritize safety when operating laser engraving equipment. Failure to follow safety guidelines can result in serious injury or damage to property.

• కంటి రక్షణ: Always wear appropriate laser safety goggles that block the specific wavelength of your laser. Never look directly at the laser beam or its reflection.
• వెంటిలేషన్: Operate the laser engraver in a well-ventilated area to avoid inhaling fumes and smoke produced during engraving.
• అగ్ని భద్రత: Keep a fire extinguisher or water source nearby. Never leave the machine unattended during operation. Be aware of flammable materials.
• మెటీరియల్ అనుకూలత: Only engrave materials that are safe for laser processing. Avoid materials that produce toxic fumes or can easily catch fire.
• పిల్లలు మరియు పెంపుడు జంతువులు: పిల్లలు మరియు పెంపుడు జంతువులను ఆపరేటింగ్ ప్రాంతం నుండి దూరంగా ఉంచండి.
• శక్తి: Ensure the machine is properly grounded and unplugged when performing maintenance or assembly.

3. ప్యాకేజీ విషయాలు

The expansion kit includes the necessary components to extend your laser engraver's frame. Please verify all parts are present before beginning assembly.

• Longer Aluminum Profiles (for X and Y axes)
• Extended Timing Belts
• Connecting Cables (for motors and limit switches)
• Fasteners (screws, nuts, washers)
• అసెంబ్లీ ఉపకరణాలు (రెంచెస్, హెక్స్ కీలు)
• కేబుల్ సంబంధాలు

4. సెటప్ సూచనలు

This section outlines the general steps to install the engraving area expansion kit. Specific disassembly and reassembly steps may vary slightly based on your exact TTS-25 or TTS-55 model. Refer to your original machine's manual for detailed frame assembly instructions.

1. పవర్ ఆఫ్ మరియు డిస్‌కనెక్ట్: Ensure your laser engraving machine is powered off and unplugged from the power source.
2. Disassemble Original Frame: Carefully disassemble the existing frame of your laser engraver. This typically involves removing the corner brackets, side profiles, and any attached components like motors and limit switches.
3. Replace Profiles: Replace the original shorter aluminum profiles with the longer profiles provided in the expansion kit. Ensure correct orientation for the T-slots and mounting points.
4. Assemble New Frame: Reassemble the frame using the new longer profiles and the original corner brackets and fasteners. Tighten all screws securely but do not overtighten.
5. Install Extended Belts: Replace the original timing belts with the extended belts from the kit. Ensure they are properly routed and tensioned.
6. భాగాలను తిరిగి కనెక్ట్ చేయండి: Reattach the laser module, stepper motors, limit switches, and any other electronic components to the new frame. Use the provided extended cables if necessary.
7. కేబుల్ నిర్వహణ: Use cable ties to neatly manage all wires, ensuring they do not interfere with the movement of the laser module.
8. కదలికను ధృవీకరించండి: Manually move the laser module across the entire new engraving area to ensure smooth, unobstructed movement.

5. ఆపరేటింగ్ సూచనలు

Once the expansion kit is installed, your laser engraver will have a larger working area. The basic operation principles remain the same as your original machine, but you will now be able to process larger designs.

• సాఫ్ట్‌వేర్ కాన్ఫిగరేషన్: You may need to update the working area dimensions in your laser control software (e.g., LightBurn, LaserGRBL) to reflect the new expanded size. Refer to your software's documentation for how to adjust workspace settings.
• మెటీరియల్ ప్లేస్‌మెంట్: Utilize the full expanded area by carefully positioning your materials.
• Test Engravings: Always perform small test engravings on scrap material to verify laser power, speed, and focus settings for your specific material.

6. నిర్వహణ

Regular maintenance ensures the longevity and optimal performance of your laser engraver and the expansion kit.

• పట్టాలు మరియు చక్రాలను శుభ్రం చేయండి: Periodically clean the guide rails and wheels to remove dust and debris, ensuring smooth movement.
• బెల్ట్ టెన్షన్: Check the tension of the timing belts. They should be taut but not overly tight. Adjust if necessary.
• ఫాస్టెనర్ తనిఖీ: Periodically inspect all screws and fasteners to ensure they remain tight.
• లెన్స్ క్లీనింగ్: Clean the laser lens according to your laser module's instructions to maintain optimal laser performance.

7. ట్రబుల్షూటింగ్

If you encounter issues after installing the expansion kit, consider the following:

Laser module not moving correctly or hitting limits:

• Verify all cables (motor, limit switch) are securely connected and not pinched.
• Check belt tension; loose belts can cause skipped steps.
• Ensure the working area dimensions in your software are correctly updated to the new expanded size.
• Inspect the rails for any obstructions or debris.

Engraving quality issues:

• Ensure the laser module is securely mounted and not wobbling.
• Check belt tension for consistency.
• Verify the material is flat and properly focused.

8. స్పెసిఫికేషన్లు

9 వినియోగదారు చిట్కాలు

• Laser Module Compatibility: If you plan to use an additional or third-party laser module with your expanded engraver, ensure it is physically compatible with the new frame dimensions and electrically compatible with your machine's control board. Check the mounting points and power requirements.
• సాఫ్ట్‌వేర్ అప్‌డేట్‌లు: Always keep your laser control software and firmware updated to ensure compatibility and access to the latest features and bug fixes.
• Workspace Calibration: After expansion, it's good practice to recalibrate your machine's workspace and origin points within your software to ensure accurate positioning.

10. వారంటీ మరియు మద్దతు

For warranty information, technical support, or assistance with parts, please contact the seller or manufacturer directly. Keep your purchase receipt and product details handy when contacting support.