UNI-T UTI260A Thermal Imager User Manual

పరిచయం

Thank you for choosing the UNI-T UTI260A Thermal Imager. This manual provides detailed instructions for the safe and correct use of your device. Please read it thoroughly before operation and keep it in an easily accessible place for future reference.

The UTI260A is a professional thermal imager designed for various applications, including repairs, floor heating pipe testing, circuit board inspection, transmission pipeline inspection, and car engine inspection. It features a 256x192 pixel IR resolution, a wide temperature measurement range, and robust construction with IP65 rating and 2-meter drop proofing.

భద్రతా సూచనలు

To ensure accurate and safe operation, please adhere to the following guidelines:

• ఉత్పత్తిని ఉపయోగించే ముందు సూచనలను జాగ్రత్తగా చదవండి.
• Do not use the product in flammable, explosive, steamy, wet, or corrosive environments.
• Stop using the product if it is damaged, dropped, or modified, as this may lead to inaccurate measurement results.
• When the LED light is on, please do not point it at the eyes of people or animals.
• Use the correct emissivity to obtain accurate temperature readouts.
• Warm up the product for 20 minutes before measuring if it has not been used for a long time.
• Avoid taking measurements during or immediately after charging, as the internal temperature rise can lead to inaccurate readings.
• Wait for readings to stabilize if they are fluctuating.

ఉత్పత్తి ముగిసిందిview

The UNI-T UTI260A is a handheld thermal imager with a 2.8-inch TFT LCD display. Key components and features are illustrated below:

Image: Labeled diagram of the UTI260A Thermal Imager showing its components.

ప్రధాన భాగాలు:

1. ఎగువ సిasing
2. దిగువ సిasing
3. USB టైప్-సి ఇంటర్‌ఫేస్
4. SD కార్డ్ స్లాట్
5. ఇంటర్ఫేస్ కవర్
6. ట్రైపాడ్ మౌంటు రంధ్రం
7. ఫ్లాష్లైట్
8. ఇన్‌ఫ్రారెడ్ కెమెరా లెన్స్
9. ట్రిగ్గర్
10. LCD
11. పైకి బటన్
12. పవర్ బటన్
13. ఫ్లాష్‌లైట్ బటన్
14. ఎడమ బటన్
15. డౌన్ బటన్
16. కుడి బటన్
17. చిత్రం viewing బటన్
18. రిటర్న్ బటన్
19. సెట్ బటన్

స్పెసిఫికేషన్లు

The following table details the technical specifications of the UTI260A Thermal Imager:

Image: Detailed technical specifications of the UTI260A.

సెటప్

1 బ్యాటరీని ఛార్జ్ చేస్తోంది

The device is powered by a 5000mAh (18Wh) fixed Li-ion battery. Before first use, or if the battery is low, charge the device using the provided Type-C USB cable.

• Connect the Type-C USB cable to the device's USB Type-C interface (3).
• Connect the other end of the cable to a safety-certified 5V/1A or 5V/2A power adapter.
• Charging time is typically less than 5 hours.
• గమనిక: Do not turn off the product during charging. If shutdown or restart is needed, unplug the Type-C power cord and disconnect the power supply first.

Image: The thermal imager connected to a power source via Type-C USB for charging.

2. SD కార్డ్ చొప్పించడం

The UTI260A supports a Micro SD card (TF card) for image storage. A 32GB TF card is included with the accessories.

• Locate the SD card slot (4) on the device, usually protected by an interface cover (5).
• మైక్రో SD కార్డ్ స్లాట్‌లో క్లిక్ అయ్యే వరకు జాగ్రత్తగా చొప్పించండి.
• గమనిక: To avoid affecting operating speed or causing abnormal data, regularly copy backup data and clean up the SD card. Do not insert or remove the SD card repeatedly.

3. పవర్ చేయడం ఆన్/ఆఫ్

• పవర్ ఆన్ చేయడానికి: Long press the Power button (12) for 3 seconds.
• పవర్ ఆఫ్ చేయడానికి: Long press the Power button (12) for 3 seconds.
• గమనిక: If the product has not been used for a long time or the measurement environment has changed, turn it on and leave it for 20 minutes before measuring to ensure accuracy. Powering off takes 5 to 6 seconds; avoid repeated power cycles.

ఆపరేటింగ్ సూచనలు

1. ప్రాథమిక కొలతలు

In the main interface, the device displays real-time thermal images. You can adjust measurement parameters via the menu.

• నొక్కండి సెట్ ప్రధాన మెనుని తెరవడానికి బటన్.
• ఉపయోగించండి ఎడమ/కుడి buttons to select "Measurement".
• నొక్కండి సెట్ to open its submenu.
• ఉపయోగించండి పైకి/క్రిందికి buttons to select options like "Center spot", "Hi/Lo spot", or "ROI" (Region of Interest).
• నొక్కండి తిరిగి button to go back to the previous interface.

2. Point Temperature Measurement

The device allows adding up to three specific temperature measurement points.

• From the main menu, select "Point temperature".
• నొక్కండి సెట్ ఉపమెనుని తెరవడానికి.
• ఉపయోగించండి పైకి/క్రిందికి to select a point (e.g., Point 1, Point 2, Point 3).
• నొక్కండి సెట్ to add the point to the main interface.
• ఉపయోగించండి ఎడమ/కుడి/పైకి/క్రిందికి buttons to move the point, then press సెట్ to confirm its position. The temperature of the point will be displayed.
• నొక్కండి సెట్ again to close the point.
• నొక్కండి తిరిగి నిష్క్రమించడానికి.

చిత్రం: ఉదాamples of Focus Area (ROI) and three temperature measurement points on the display.

3. Palette Selection

Choose from 7 color palettes to visualize thermal images.

• From the main menu, select "Palette".
• నొక్కండి సెట్ ఉపమెనుని తెరవడానికి.
• ఉపయోగించండి పైకి/క్రిందికి to select a desired palette (e.g., White Hot, Black Hot, Red Hot, Iron Bow, Lava, Rainbow, Rainbow HC).
• నొక్కండి సెట్ to apply the selected palette.
• నొక్కండి తిరిగి నిష్క్రమించడానికి.

Image: Visual representation of different color palettes available on the UTI260A.

4. Temperature Unit and Scale

Configure the temperature unit and measurement scale.

• From the main menu, select "Settings", then navigate to "Temperature unit" or "Temperature scale".
• For "Temperature unit", select °C or °F and press సెట్ నిర్ధారించడానికి.
• For "Temperature scale", select "Low gain" (-15°C~150°C) or "High gain" (150°C~550°C) and press సెట్ నిర్ధారించడానికి.
• గమనిక: Switching between low and high gain may take 30-40 seconds.

Image: Screenshots showing options for language and temperature unit/scale selection.

5. అధిక/తక్కువ ఉష్ణోగ్రత అలారం

Set alarms for temperatures exceeding defined thresholds.

• From the main menu, select "Settings", then navigate to "HI/LO Alert".
• Select "On" or "Off" for HI (high) or LO (low) alert.
• నొక్కండి సెట్ to set the alert value. Use పైకి/క్రిందికి విలువను సర్దుబాటు చేయడానికి.
• నొక్కండి తిరిగి నిష్క్రమించడానికి.
• When enabled, the LED light will flash if the temperature exceeds the set range.

Image: Display showing high and low temperature alarm settings and the LED light flashing as an alarm.

6. ఇమేజ్ క్యాప్చర్ మరియు Viewing

• To Capture an Image: నొక్కండి ట్రిగ్గర్ (9) button. Use ఎడమ/కుడి to choose "Save" or "Not Save", then press సెట్ నిర్ధారించడానికి లేదా తిరిగి to cancel. In auto-save mode, images are saved automatically to the SD card.
• కు View చిత్రాలు: నొక్కండి చిత్రం viewing (17) button. Use పైకి/క్రిందికి/ఎడమ/కుడి to select an image, then press సెట్ కు view it. Press సెట్ మళ్ళీ కు view image information and delete images.
• గమనిక: Images can only be saved if an SD card is inserted. Do not remove or insert the SD card when saving or viewచిత్రాలు.

7. ఫ్లాష్‌లైట్ ఆపరేషన్

• లాంగ్ ప్రెస్ ది ఫ్లాష్‌లైట్ బటన్ (13) for 3 seconds to turn the flashlight on or off.
• The flashlight also functions as an alarm indicator, flashing when the HI/LO alert is triggered.

8. PC Software Functionality

The UTI260A supports PC software for image analysis and real-time projection.

• సాఫ్ట్‌వేర్ ఇన్‌స్టాలేషన్: Download and install the UTI-Live Screen software and real-time image projection upper computer software. Refer to the Software User Manual (available on the official Uni-Trend website) for detailed instructions.
• U డిస్క్ మోడ్:
  1. From the main menu, select "Settings", then "USB mode", and choose "USB disk".
  2. Connect the device to your PC using the Type-C USB cable.
  3. In U disk mode, you can browse pictures, analyze image data, and generate/export PDF analysis reports.
• USB Camera Mode (Real-time Projection):
  1. From the main menu, select "Settings", then "USB mode", and choose "USB camera".
  2. Connect the device to your PC using the Type-C USB cable.
  3. Use the image projection host computer software to achieve real-time image projection.
• గమనిక: Do not unplug the USB cable during image projection. Close the PC software before unplugging the USB cable.

Image: Screenshots illustrating PC software functions for U disk mode (infrared image analysis, PDF report generation) and USB camera mode (real-time projection).

9. Automatic Shut-down

Configure the device to automatically power off after a period of inactivity to save battery.

• From the main menu, select "Settings", then "Auto power off".
• Choose from 5 minutes, 10 minutes, 30 minutes (default), or Off.
• నొక్కండి సెట్ నిర్ధారించడానికి.

10. ప్రకాశాన్ని ప్రదర్శించు

Adjust the screen brightness for optimal viewవివిధ లైటింగ్ పరిస్థితుల్లో ing.

• From the main menu, select "Settings", then "Display brightness".
• తక్కువ, మధ్యస్థం లేదా ఎక్కువ నుండి ఎంచుకోండి.
• నొక్కండి సెట్ నిర్ధారించడానికి.

11. Language and Date/Time Settings

Customize the device's language and set the correct date and time.

• From the main menu, select "Settings", then "Language" or "Date and Time".
• For "Language", select English or Chinese and press సెట్.
• For "Date and Time", select the desired format (e.g., 24H/12H) and adjust year/month/day/hour/minute using పైకి/క్రిందికి బటన్లు. నొక్కండి సెట్ సేవ్ చేయడానికి.

12 ట్రైపాడ్ మౌంటు

The device includes a 1/4-inch tripod mounting hole for stable, hands-free operation.

• Locate the tripod mounting hole (6) at the bottom of the device.
• Attach the thermal imager to a standard tripod using a 1/4-inch screw adapter.

Image: The UTI260A thermal imager mounted on a tripod, highlighting the tripod screw hole.

నిర్వహణ

• శుభ్రపరచడం: Use a wet cloth or weak soap solution to clean the outer shell of the device. Do not use abrasives, isopropyl alcohol, or solvents to clean the outer shell, lens, or windows.
• SD కార్డ్ నిర్వహణ: Regularly copy backup data from the SD card to a computer and clean up the card to maintain optimal operating speed and prevent data corruption. The number of saved images should not exceed 1000.
• నిల్వ: Store the device within the specified storage temperature range of -20°C to 60°C (-4°F to 140°F).

ఉష్ణోగ్రత పరిహారం మరియు అమరిక

The device supports temperature compensation to adapt to different environments. Manual calibration can also be performed to improve measurement stability. Refer to the "Measurements" section (8.9 in the full manual) for specific settings. Press the Return button in the main interface to calibrate.

ట్రబుల్షూటింగ్

• సరికాని రీడింగ్‌లు:
  • Ensure the correct emissivity is set for the target material. Refer to the "Common Emissivity" table below.
  • Allow the device to warm up for 20 minutes if it hasn't been used for a long time.
  • Avoid taking measurements immediately after charging.
  • Wait for readings to stabilize if they are fluctuating.
• పరికరం ఆన్ చేయడం లేదు:
  • Check battery level and ensure it is sufficiently charged.
  • పవర్ బటన్‌ను 3 సెకన్ల పాటు నొక్కి ఉంచారని నిర్ధారించుకోండి.
• Images Not Saving:
  • Verify that an SD card is properly inserted into the device.
  • Check if the SD card is full; if so, transfer images to a PC and format the card.

Common Emissivity Table

Using the correct emissivity setting is crucial for accurate temperature measurements. Adjust the emissivity value (0.01-1.00) based on the material being measured.

వినియోగదారు చిట్కాలు

• For quick inspections, utilize the "Center spot" measurement mode.
• When analyzing complex thermal patterns, use the "ROI" (Region of Interest) and add up to three "Point temperature" markers for detailed analysis.
• Experiment with different "Color palettes" to highlight specific temperature variations relevant to your application. "Iron" and "Rainbow" are often good general-purpose palettes, while "White Hot" and "Black Hot" can be useful for high contrast.
• Always ensure your SD card has sufficient free space before starting a new inspection session to avoid losing data.
• For long-duration monitoring or detailed analysis, connect the imager to a PC in "USB camera mode" for real-time projection or "U disk mode" to generate comprehensive reports.
• The "Three-proof design" (dustproof, waterproof, drop-resistant) makes this device suitable for harsh environments.

Image: The UTI260A demonstrating its dustproof, waterproof, and drop-resistant capabilities.

అప్లికేషన్ దృశ్యాలు

The UTI260A is versatile and can be used in various professional settings:

• Motor Detection: Identify overheating in motors and mechanical components.
• Power Distribution Cabinet Inspection: Detect hot spots and potential failures in electrical systems.
• Car Engine Inspection: Diagnose engine issues by observing thermal signatures.
• Circuit Board Inspection: Pinpoint faulty components on PCBs.
• Transmission Pipeline Inspection: Locate leaks or blockages in pipelines.

చిత్రం: విజువల్ ఎక్స్amples of the UTI260A being used for motor detection, power distribution cabinet inspection, and car engine inspection.

వారంటీ మరియు మద్దతు

పరిమిత వారంటీ మరియు బాధ్యత

Uni-Trend guarantees that the product is free from any defect in material and workmanship within one year from the purchase date. This warranty does not cover damages caused by accident, negligence, misuse, modification, contamination, and improper handling. The dealer is not authorized to provide any other warranty on behalf of Uni-Trend.

If you require warranty service within the warranty period, please contact your seller directly. This warranty is the only compensation you can obtain. Uni-Trend will not be responsible for any special, indirect, incidental, or subsequent damage or loss caused by any reason or speculation. Some areas or countries do not allow limitations on implied warranties and incidental or subsequent damage, so the above limitation of liability and stipulation may not apply to you.

అదనపు వనరులు

A comprehensive user manual in PDF format is available for download. This manual contains more detailed information on advanced features and troubleshooting.

Download PDF Manual: UNI-T UTI260A Professional Thermal Imager User Manual (PDF)