1. పరిచయం
The Liectroux HCR-10 is an advanced robot window cleaner designed to automate the cleaning of various glass surfaces. Featuring intelligent navigation, automatic water spraying, and a powerful vacuum suction, it ensures efficient and thorough cleaning. This manual provides essential information for safe and effective use of your HCR-10 robot.
2. ముఖ్యమైన భద్రతా సమాచారం
పరికరాన్ని ఆపరేట్ చేసే ముందు దయచేసి అన్ని భద్రతా సూచనలను జాగ్రత్తగా చదవండి.
- Always attach the safety rope securely to a fixed object indoors before placing the robot on the window.
- Ensure the power cable is properly connected and secured to prevent accidental disconnection.
- Do not use the robot on cracked or damaged glass surfaces.
- ఆపరేషన్ సమయంలో చేతులు మరియు వదులుగా ఉన్న దుస్తులను కదిలే భాగాలకు దూరంగా ఉంచండి.
- Do not use the robot in rainy or extremely humid conditions.
- Supervise the robot during its first few cleaning cycles to ensure proper operation and adherence to the surface.
- The built-in UPS provides power-off protection for approximately 20 minutes. Retrieve the robot promptly if power is lost.
3. ఉత్పత్తి ముగిసిందిview & ప్యాకేజీ విషయాలు
The Liectroux HCR-10 is designed for efficient window cleaning with features like dual-disk twisting, a compact body, and a self-learning system.
ప్యాకేజీ విషయాలు:
- Liectroux HCR-10 Main Unit
- Cleaning Cloths (10 pieces)
- Cleaning Ring (1 piece)
- Water Adding Bottle (1 piece)
- Remote Controller (1 piece)
- Extendable Cable & Adapter (1 set)
- పవర్ కార్డ్ (1 ముక్క)
- Safety Rope (1 piece)
- ఇన్స్ట్రక్షన్ మాన్యువల్ (1 ముక్క)
4. స్పెసిఫికేషన్లు
| ఫీచర్ | స్పెసిఫికేషన్ |
|---|---|
| ఇన్పుట్ వాల్యూమ్tage | 100-240V~, 50/60Hz |
| రేట్ చేయబడిన శక్తి | 80W |
| బ్యాటరీ కెపాసిటీ | 500mAh లిథియం-అయాన్ బ్యాటరీ |
| బాహ్య కొలతలు | 295*145*68మి.మీ |
| చూషణ శక్తి | 2800పా |
| నికర బరువు | 1.03కి.గ్రా |
| UPS విద్యుత్ వైఫల్య రక్షణ సమయం | 20నిమి |
| Way to Control | పరారుణ రిమోట్ నియంత్రణ |
| శబ్దం | 65dB కంటే తక్కువ |
| Border Detection | ఆటోమేటిక్ |
| Fall Arrest Control | UPS (Uninterruptible Power System) / Safety Rope |
| క్లీనింగ్ మోడ్ | 3 రకాలు |
| Water Spraying Method | మాన్యువల్ / ఆటో |
5. సెటప్ గైడ్
- శుభ్రపరిచే వస్త్రాలను అటాచ్ చేయండి: Securely attach the high-density cleaning fiber cloths to the two rotating disks on the underside of the robot. Ensure they are flat and cover the entire surface of the disks.
- పవర్ కనెక్ట్ చేయండి:
Connect the power cord to the adapter, and then connect the adapter to the robot's power input. Plug the power cord into a suitable electrical outlet. The robot requires continuous power during operation.
Connect the 4m power cable and 1.5m extension for a larger cleaning range. - వాటర్ ట్యాంక్ నింపండి: Open the water tank cap and use the provided water adding bottle to fill the 30ml water tank with clean water or a suitable glass cleaning solution (detergent not included). Close the cap securely.
Fill the water tank with water or cleaning solution using the provided bottle. - భద్రతా తాడును అటాచ్ చేయండి: Securely tie one end of the safety rope to the robot and the other end to a strong, fixed object indoors (e.g., a heavy piece of furniture, a window frame anchor). This is a critical safety measure to prevent the robot from falling.
6. ఆపరేటింగ్ సూచనలు
- పవర్ ఆన్: Press the power button on the robot or the remote control to turn on the device. The indicator lights will illuminate.
- ఉపరితలంపై ఉంచండి: Hold the robot firmly against the glass surface. The vacuum suction will activate, securing the robot to the window. Ensure a strong suction before releasing.
One-press start on the framework for easy operation. - శుభ్రపరిచే మోడ్ను ఎంచుకోండి: Use the remote control to select one of the three automatic cleaning modes:
- Up-to-down: Cleans from top to bottom.
- Left-to-down: Cleans from left to bottom.
- Right-to-down: Cleans from right to bottom.
Use the remote control to select cleaning modes or manual movement. - Automatic Water Spray: The robot features an automatic water spray function. You can also manually trigger the spray using the remote control. The innovative atomizing nozzle creates a 15µm water mist to effectively dissolve dirt.
The atomizing nozzle sprays a fine mist for effective dirt dissolution. - శుభ్రపరిచే ప్రక్రియ: The robot employs dual-disk simulated twisting and sweeping movements at 70rpm for comprehensive cleaning. Its AI routing ensures efficient coverage.
AI routing with dual-wheel twisting ensures thorough cleaning. - పూర్తి: The robot will automatically return to its starting point once the cleaning cycle is complete.
వర్తించే ఉపరితలాలు:
The Liectroux HCR-10 is suitable for various smooth surfaces, including:
- Bathroom mirrors
- Wooden/tile surfaces (ensure surface is smooth and non-porous)
- Marble walls
- Windows around the house
- Framed glass
7. నిర్వహణ
- Clean Cleaning Cloths: After each use, remove the cleaning cloths from the robot. Wash them thoroughly with water and mild detergent. Allow them to air dry completely before reattaching or storing.
The high-density fiber cloths are designed to capture various types of dirt and should be cleaned regularly. - ఖాళీ నీటి ట్యాంక్: If any cleaning solution remains in the tank, empty it and rinse with clean water. Ensure the tank is dry before storage.
- క్లీన్ సెన్సార్లు: Periodically wipe the robot's sensors with a soft, dry cloth to ensure optimal performance and border detection.
- సరిగ్గా నిల్వ చేయండి: Store the robot and its accessories in a cool, dry place away from direct sunlight and extreme temperatures.
8. ట్రబుల్షూటింగ్
- Robot not sticking to the glass:
- Ensure the glass surface is clean and free of large debris that could interfere with suction.
- Check that the cleaning cloths are properly attached and not overly wet.
- Verify the power cable is securely connected and the robot is receiving power.
- The suction power is 2800Pa; ensure the surface is suitable for this level of suction.
- Robot not moving or moving erratically:
- Check for any obstructions on the glass surface or around the robot's wheels.
- Ensure the cleaning cloths are not too dirty or worn, which can affect movement.
- Restart the robot and try a different cleaning mode.
- రిమోట్ కంట్రోల్ బ్యాటరీలు ఖాళీ కాలేదని ధృవీకరించండి.
- Water spray not working:
- Check if the water tank is filled.
- Ensure the nozzle is not clogged. Clean it gently if necessary.
- Verify the water spray function is activated via the remote control (manual or auto mode).
- Robot falls during operation:
- Immediately check the safety rope attachment. It must be securely fastened to a strong anchor point.
- Ensure the power connection is stable. The UPS provides temporary power, but a stable main power supply is crucial.
- Avoid using on extremely dirty or uneven surfaces that might compromise suction.
9 వినియోగదారు చిట్కాలు
- For very dirty windows, perform a dry cleaning cycle first to remove loose dust and debris, then follow with a wet cleaning cycle.
- Use distilled water or a recommended glass cleaning solution to prevent streaks and mineral buildup in the spray nozzle.
- Always start the robot at the top of the window to allow gravity to assist in the cleaning process and ensure complete coverage.
- Regularly check the cleaning cloths for saturation and replace them with fresh ones as needed for optimal results.
- The robot is designed for various surfaces; however, always test on a small, inconspicuous area first, especially for new or delicate surfaces.
10. వారంటీ మరియు మద్దతు
The Liectroux HCR-10 Robot Window Cleaner comes with a 5-year warranty, reflecting our commitment to quality and durability. For any technical assistance, warranty claims, or product inquiries, please contact Liectroux customer support through your retailer or the official Liectroux webసైట్.
దయచేసి వారంటీ ప్రయోజనాల కోసం మీ కొనుగోలు రుజువును ఉంచుకోండి.
