HYCHIKA 1300W Circular Saw User Manual

1. ముఖ్యమైన భద్రతా సమాచారం

Always observe basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury. Read all instructions carefully before operating this circular saw.

సాధారణ పవర్ టూల్ భద్రతా హెచ్చరికలు:

• పని ప్రాంత భద్రత: Keep your work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• విద్యుత్ భద్రత: పవర్ టూల్ ప్లగ్‌లు తప్పనిసరిగా అవుట్‌లెట్‌తో సరిపోలాలి. ప్లగ్‌ని ఏ విధంగానూ సవరించవద్దు. ఎర్త్డ్ (గ్రౌండెడ్) పవర్ టూల్స్‌తో ఎలాంటి అడాప్టర్ ప్లగ్‌లను ఉపయోగించవద్దు. సవరించని ప్లగ్‌లు మరియు మ్యాచింగ్ అవుట్‌లెట్‌లు విద్యుత్ షాక్ ప్రమాదాన్ని తగ్గిస్తాయి.
• వ్యక్తిగత భద్రత: Always wear eye protection (safety glasses or goggles), hearing protection, and appropriate work gloves. Dress properly. Do not wear loose clothing or jewelry. Keep hair and clothing away from moving parts.
• సాధన వినియోగం మరియు సంరక్షణ: Do not force the power tool. Use the correct power tool for your application. It will do the job better and safer at the rate for which it was designed. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools.
• కిక్‌బ్యాక్ మరియు సంబంధిత హెచ్చరికలు: Kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an uncontrolled saw to lift up and out of the workpiece toward the operator. Proper technique and common sense can avoid kickback.

2. ఉత్పత్తి ముగిసిందిview

The HYCHIKA 1300W Circular Saw is a powerful and versatile tool designed for precise cutting of various materials, including wood, bamboo plywood, solid wood, plywood, fiberboard, and PVC pipe. It features adjustable cutting depth and angle, a safety switch, and a dust outlet for a cleaner work environment.

ముఖ్య భాగాలు:

• మోటార్: 1300W, 4500RPM for efficient and long-lasting performance.
• భద్రతా స్విచ్: ప్రమాదవశాత్తు ప్రారంభాన్ని నిరోధిస్తుంది.
• దిగువ ప్లేట్: Provides stability during cutting.
• Dust Outlet: Connects to a vacuum cleaner for dust extraction.
• బ్లేడ్ గార్డ్: తిరిగే బ్లేడ్ నుండి వినియోగదారుని రక్షిస్తుంది.
• సర్దుబాటు చేయగల బేస్ ప్లేట్: Allows for depth and bevel angle adjustments.
• హ్యాండిల్: సౌకర్యవంతమైన పట్టు కోసం ఎర్గోనామిక్‌గా రూపొందించబడింది.

3. ప్యాకింగ్ జాబితా

మీ ఉత్పత్తి ప్యాకేజీలో ఈ క్రింది అంశాలు చేర్చబడ్డాయి:

• 1 x HYCHIKA 1300W Circular Saw
• 1 x 24T Saw Blade (185mm)
• 1 x Allen Wrench (Hexagonal Spanner)
• 1 x Guide Ruler (Parallel Guide)
• 1 x వినియోగదారు మాన్యువల్

4. స్పెసిఫికేషన్లు

5. సెటప్

5.1 Blade Installation/Replacement:

Always ensure the saw is unplugged from the power source before performing any adjustments or maintenance.

1. Press the Spindle Lock: Locate and press the spindle lock button to prevent the blade from rotating.



2. Loosen the Arbor Nut: Use the provided Allen wrench (hexagonal spanner) to loosen the arbor nut that secures the blade.



3. Remove Outer Flange and Old Blade: Once the nut is loose, remove the outer flange and carefully take out the old saw blade.



4. కొత్త బ్లేడ్‌ను ఇన్‌స్టాల్ చేయండి: Place the new 185mm 24T saw blade onto the arbor, ensuring the teeth are oriented correctly for cutting (usually indicated by an arrow on the blade and saw).



5. Tighten Arbor Nut: Reinstall the outer flange and arbor nut. While still pressing the spindle lock, tighten the arbor nut securely with the Allen wrench.

5.2 కట్టింగ్ లోతును సర్దుబాటు చేయడం:

The cutting depth can be adjusted to suit the thickness of your workpiece. For a 90° cut, the maximum depth is 65mm.

1. Loosen the depth adjustment lever (usually located at the front of the saw).
2. Raise or lower the saw base plate to achieve the desired cutting depth.
3. Align the depth indicator with the desired measurement on the scale.
4. లోతు సర్దుబాటు లివర్‌ను సురక్షితంగా బిగించండి.

5.3 Adjusting Cutting Angle (Bevel):

The saw allows for bevel cuts from 0° to 45°. At a 45° inclination, the maximum cutting depth is 45mm.

1. Loosen the bevel adjustment lever (usually located at the rear of the saw).
2. Tilt the saw base plate to the desired angle.
3. Align the angle indicator with the desired measurement on the scale.
4. Securely tighten the bevel adjustment lever.

5.4 Using the Parallel Guide Ruler:

The included guide ruler helps ensure straight and accurate cuts.

1. Slide the guide ruler into the slot on the front of the saw's base plate.
2. Adjust the ruler to the desired cutting width.
3. Tighten the locking screw to secure the ruler in place.
4. Ensure the ruler runs along the edge of your workpiece during the cut for consistent results.

6. ఆపరేటింగ్ సూచనలు

6.1 Preparing for a Cut:

1. Ensure the saw is unplugged when making adjustments.
2. Select the appropriate blade for the material you are cutting.
3. Adjust the cutting depth and angle as required (refer to Section 5).
4. Secure your workpiece firmly to a stable surface using clamps. Never hold the workpiece by hand.
5. Mark your cutting line clearly.
6. Connect the vacuum tube to the dust outlet and a vacuum cleaner if dust extraction is desired.

6.2 Making a Cut:

1. రంపాన్ని తగిన పవర్ అవుట్‌లెట్‌లోకి ప్లగ్ చేయండి.
2. రంపాన్ని రెండు చేతులతో గట్టిగా పట్టుకోండి.
3. Position the front edge of the saw's base plate on the workpiece, ensuring the blade is clear of the material.
4. Engage the safety switch and then press the trigger to start the saw. Allow the blade to reach full speed before beginning the cut.
5. Slowly and steadily guide the saw along your marked cutting line. Do not force the saw; let the blade do the work.
6. Maintain a firm grip and keep your body balanced.
7. కట్ పూర్తయిన తర్వాత, ట్రిగ్గర్‌ను విడుదల చేసి, వర్క్‌పీస్ నుండి రంపాన్ని ఎత్తే ముందు బ్లేడ్ పూర్తిగా ఆగిపోయేలా చేయండి.

7. నిర్వహణ

క్రమం తప్పకుండా నిర్వహణ మీ వృత్తాకార రంపపు దీర్ఘాయువు మరియు సురక్షితమైన ఆపరేషన్‌ను నిర్ధారిస్తుంది. ఏదైనా నిర్వహణకు ముందు ఎల్లప్పుడూ సాధనాన్ని అన్‌ప్లగ్ చేయండి.

• శుభ్రపరచడం: After each use, clean the saw thoroughly. Remove sawdust and debris from the motor vents, blade guard, and base plate. Use a soft brush or compressed air.
• బ్లేడ్ తనిఖీ: Regularly inspect the saw blade for sharpness, damage, or missing teeth. A dull or damaged blade can cause kickback and poor cutting performance. Replace blades as needed.
• త్రాడు తనిఖీ: Check the power cord for any cuts, fraying, or damage. Do not use the saw if the cord is damaged.
• సరళత: The saw's internal components are factory-lubricated and generally do not require additional lubrication. Refer to a qualified service technician for internal maintenance.
• నిల్వ: Store the saw in a dry, secure place out of reach of children.

8. ట్రబుల్షూటింగ్

If you encounter issues with your HYCHIKA Circular Saw, try the following steps:

• సా ప్రారంభం కాదు:
  • Check if the saw is properly plugged into a working power outlet.
  • Ensure the safety switch is engaged before pressing the trigger.
  • నష్టం కోసం పవర్ కార్డ్ తనిఖీ చేయండి.
• Blade gets stuck or cuts slowly:
  • The blade might be dull or damaged. Replace it if necessary.
  • You might be forcing the saw. Allow the blade to cut at its own pace.
  • Ensure the cutting depth and angle are correctly set for the material. For hard materials, adjust the position before cutting to prevent the blade from getting stuck due to overheating.
  • The workpiece might not be properly secured, causing binding.
• అధిక కంపనం లేదా శబ్దం:
  • Check if the blade is securely installed and not warped.
  • Ensure all fasteners on the saw are tight.
  • సమస్య కొనసాగితే, వినియోగాన్ని ఆపివేసి, కస్టమర్ సపోర్ట్‌ని సంప్రదించండి.
• Motor issues (e.g., 'motor bruscle' as reported by some users):
  • This could indicate an internal motor problem. Ensure the saw is not overloaded or overheating.
  • Check for any obstructions in the motor's ventilation slots.
  • If the motor is making unusual noises or performing poorly, it is recommended to seek professional service.

9 వినియోగదారు చిట్కాలు

• బ్లేడ్ అనుకూలత: Always ensure you use a 185mm diameter blade with the correct arbor size for this saw. Check the blade specifications carefully when purchasinగ్రా ప్రత్యామ్నాయాలు.
• Preventing Blade Sticking: When cutting hard materials, it is crucial to adjust the saw's position and depth settings appropriately before starting the cut. This helps prevent the saw blade from getting stuck in the material and potentially damaging the machine due to overheating.
• దుమ్ము నిర్వహణ: Utilize the dust outlet by connecting it to a vacuum cleaner. This significantly reduces airborne sawdust, maintaining a cleaner and safer work environment.
• Practice Cuts: If you are new to using a circular saw or cutting a new material, make practice cuts on scrap pieces first to get a feel for the tool and settings.

10. వారంటీ మరియు మద్దతు

For any questions, technical assistance, or warranty claims, please contact the HYCHIKA customer support team or your retailer. Please have your product model number (M1Y-DU29-185) and purchase information ready when contacting support.