ఇన్స్ట్రక్షన్ మాన్యువల్

1. పరిచయం

This manual provides detailed instructions for the installation, setup, and operation of your Scimagic-RC Tuya WiFi 433MHZ Receiver, 1527 Remote Control, and Wireless Numeric Keypad. This system is designed to provide secure and convenient access control for automatic garage doors, swing gates, and sliding gate openers, integrating with smart home platforms like Tuya, Smart Life, Google Assistant, and Amazon Alexa.

2. భద్రతా సమాచారం

• Ensure all power is disconnected before performing any wiring or installation procedures.
• Installation should be performed by qualified personnel if you are unsure about electrical connections.
• పరికరాన్ని నీరు మరియు తీవ్రమైన ఉష్ణోగ్రతల నుండి దూరంగా ఉంచండి.
• Do not attempt to repair the device yourself; contact support for assistance.
• This device is intended for use with automatic door/gate systems only.

3. ప్యాకేజీ విషయాలు

మీ కొనుగోలును బట్టి, మీ ప్యాకేజీలో ఇవి ఉండవచ్చు:

• వైర్‌లెస్ న్యూమరిక్ కీప్యాడ్
• 433MHZ Receiver
• 433MHZ Remote Control (may be sold separately or in combinations)
• మౌంటు హార్డ్‌వేర్ (స్క్రూలు, వాల్ యాంకర్లు)

4. స్పెసిఫికేషన్లు

4.1. Wireless Numeric Keypad

శక్తి	6V DC (2x CR2032 Li battery)
బ్యాటరీ లైఫ్	Approx. 2 years (based on 4 operations/day)
ఫ్రీక్వెన్సీ	433.92MHz +/- 75KHz
ట్రాన్స్మిటర్ పవర్	1మె.వా
డేటా ఫార్మాట్	ప్రామాణికం
ఆపరేటింగ్ ఉష్ణోగ్రత	-20°C నుండి +55°C
Password Number	0-8 అంకెలు
జలనిరోధిత స్థాయి	IP54
కొలతలు	85 x 75 x 35 మిమీ
బరువు	150గ్రా

4.2. 433MHZ Receiver

విద్యుత్ సరఫరా	12 వి -24 వి డిసి
ఫ్రీక్వెన్సీ	433.92Mhz
కోడ్‌లు	Fixed/Learning/Rolling codes compatible
ఛానెల్‌లు	2 ఛానెల్
ఆపరేటింగ్ ఉష్ణోగ్రత	-40°C నుండి +80°C
రిసెప్షన్ పరిధి	10-50m (Built-in Aerial antenna)

4.3. 433MHZ Remote Control

మెటీరియల్	ప్లాస్టిక్ + మెటల్
ఆపరేటింగ్ ఫ్రీక్వెన్సీ	433.92MHz
వాడుక	For 433Mhz RF receiver 1527 decode
అనుకూలత	Supports learning code (1527) receivers only. Not a clone remote.

5. సెటప్

5.1. Keypad Battery Installation

The keypad requires two CR2032 Li batteries. To install or replace them:

1. కీప్యాడ్ వెనుక భాగంలో బ్యాటరీ కంపార్ట్‌మెంట్‌ను గుర్తించండి.
2. Open the battery rear cover.
3. Insert two CR2032 batteries, ensuring correct polarity.
4. Close the battery rear cover securely.

5.2. రిసీవర్ వైరింగ్

Connect the receiver to your automatic door/gate opener system according to the following terminal definitions:

• ANT: స్వీకర్త యాంటెన్నా
• CH1: రిలే అవుట్‌పుట్ 1
• CH2: రిలే అవుట్‌పుట్ 2
• V+: వాల్యూమ్tage + (12V-24V DC power supply)
• GND: గ్రౌండ్

5.3. Pairing Remote Control with Receiver

To program a new remote control to operate your garage door or gate:

1. Press and release the yellow round button on the opener (or the 'LEARN' button on the receiver board). The learn indicator light (blue LED) will glow steadily for approximately 30 seconds.
2. Within these 30 seconds, press and hold the desired button on the hand-held remote that you wish to use to operate your garage door/gate.
3. Release the button on the remote when the opener light blinks once, or the blue LED on the receiver goes out. The new remote is now programmed.

5.4. Pairing Keypad with Receiver

To program the wireless numeric keypad with the receiver:

1. Long press the 'LEARN' button on the receiver board until the blue LED lights up.
2. On the keypad, enter the original password (e.g., '11' for left channel or '22' for right channel, as indicated in the video demonstration).
3. The blue LED on the receiver will go out, indicating a successful match.

Note: Refer to the video demonstration for a visual guide on the pairing process.

6. ఆపరేటింగ్ సూచనలు

6.1. రిమోట్ కంట్రోల్ ఉపయోగించడం

Once paired, press the programmed button on your remote control to activate the connected garage door or gate opener.

6.2. Using the Wireless Numeric Keypad

To operate the connected device using the keypad:

1. Enter your programmed password on the keypad.
2. Press the appropriate channel button (e.g., 'left arrow' or 'right arrow' depending on the channel programmed) to activate the opener.

The keypad is a dual-channel transmitter, meaning it can control two separate devices or functions with different combinations.

7. నిర్వహణ

7.1. Keypad Battery Replacement

If the keypad's performance degrades or it stops responding, the CR2032 batteries may need replacement. Follow the steps in Section 5.1 for battery installation.

7.2. శుభ్రపరచడం

Wipe the devices with a soft, dry cloth. Do not use abrasive cleaners or solvents.

8. ట్రబుల్షూటింగ్

• పరికరం స్పందించడం లేదు: Check battery levels in the keypad/remote. Ensure the receiver is powered correctly. Re-attempt the pairing process.
• పరిమిత పరిధి: Ensure the receiver's antenna is unobstructed. Check for sources of interference (e.g., other wireless devices, metal structures).
• జత చేయడంలో వైఫల్యం: Ensure you are following the pairing steps precisely. The timing for pressing buttons during the learning phase is crucial.

9 వినియోగదారు చిట్కాలు

• For optimal performance, ensure the keypad is mounted in a location with good line-of-sight to the receiver, especially for outdoor installations.
• The keypad is suitable for 95% of garage door openers worldwide.
• The keypad's estimated transmission range is 200m in open space and 35m indoors.
• The system is compatible with various smart home platforms, including Tuya, Smart Life, Google Assistant, and Amazon Alexa, allowing for integrated control.
• The keypad is designed for utmost security, with transmitted codes changing at each session.
• This system is compatible with Nice OXI poa1 portals.

10. వారంటీ మరియు మద్దతు

All products come with a 1-year warranty from the store. For technical support or warranty claims, please contact the seller directly. Ensure you retain your purchase receipt as proof of purchase.

అదనపు సమాచారం కోసం, మీరు వినియోగదారు మాన్యువల్ (PDF).

11. ధృవపత్రాలు

This product is certified with:

• CE
• RoHS