Ewelink 2 Channel WiFi Smart Wireless Remote Control Switch Receiver

1. పరిచయం

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ewelink 2 Channel WiFi Smart Wireless Remote Control Switch Receiver. This versatile device allows you to remotely control various home appliances, lights, lamps, garage doors, and DC/AC motors using the eWeLink app, RF 433MHz remote controllers, and voice commands via Amazon Alexa or Google Assistant.

ఉత్పత్తి ముగిసిందిview showing compatibility with eWeLink, Alexa, Google Home, Nest, and IFTTT.

2. భద్రతా సమాచారం

Please read and understand all safety warnings and instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or property damage.

• Always disconnect power to the circuit before performing any installation, wiring, or maintenance.
• Installation should be performed by a qualified electrician or knowledgeable individual familiar with electrical wiring.
• పేర్కొన్న కరెంట్ మరియు వాల్యూమ్‌ను మించకూడదుtage ratings of the device.
• Ensure the device is used in a dry environment and avoid exposure to moisture or extreme temperatures.
• This device supports only 2.4GHz Wi-Fi networks. Do not attempt to connect it to a 5GHz network.
• The RF433 remote controller requires a 27A 12V battery (not included).

3. స్పెసిఫికేషన్లు

Product certifications including CE, RoHS, and FCC.

4. ప్యాకేజీ విషయాలు

ప్యాకేజీ సాధారణంగా వీటిని కలిగి ఉంటుంది:

• 1 x Ewelink 2 Channel WiFi Smart Wireless Remote Control Switch Receiver
• Optional: RF 433MHz Remote Controller (battery 27A 12V not included)

View of the smart switch module, disassembled to show the circuit board and casing components.

5. సెటప్

5.1 భౌతిక సంస్థాపన మరియు వైరింగ్

The switch receiver features two input ports: a USB 5V port and screw terminal ports for DC/AC 7-32V or AC 85-250V, depending on your model. The output is a passive dry contact switch, meaning it does not supply voltage. Connected appliances will require their own power supply.

Note on USB 5V Port: The USB 5V port is primarily for testing purposes and is not recommended for regular use. Using it may require removing the device's casing. This port may be removed in future product versions.

Refer to the following diagrams for correct wiring based on your application:

Wiring for Lamp (AC 85-250V Input)

Connect AC 85-250V to the input terminals (L and N). Connect the lamp to the output terminals (NO/COM or NC/COM as required).

Wiring for Lamp (DC 7-32V Input)

Connect DC 7-32V to the input terminals (+ and -). Connect the lamp to the output terminals (NO/COM or NC/COM as required).

Wiring for 4-Wire AC Motor (Input 85-250V)

This diagram shows how to connect a 4-wire AC motor (e.g., for curtains or garage doors) to the switch. Ensure interlock mode is set in the eWeLink app for proper operation.

Wiring for DC Motor (Input 7-32V)

Connect a DC motor to the switch with 7-32V input. Interlock mode should be configured in the eWeLink app.

Wiring for 3-Wire AC Motor (Input 85-250V)

Diagram for connecting a 3-wire AC motor. Interlock mode is required in the eWeLink app.

Internal Board Layout (DC 7-32V Version)

This image highlights the RF pairing button, manual switch, Wi-Fi LED indicator, and input terminals for the DC 7-32V version.

5.2 eWeLink App Installation

1. యాప్ స్టోర్ (iOS) లేదా గూగుల్ ప్లే స్టోర్ (ఆండ్రాయిడ్) నుండి eWeLink యాప్‌ను డౌన్‌లోడ్ చేసుకోండి.
2. కొత్త ఖాతా కోసం నమోదు చేసుకోండి లేదా మీకు ఇప్పటికే ఒకటి ఉంటే లాగిన్ అవ్వండి.

5.3 Device Pairing (Wi-Fi)

1. Ensure your Wi-Fi network is 2.4GHz. This device does not support 5GHz Wi-Fi.
2. Connect the smart switch receiver to a power supply.
3. మీ స్మార్ట్‌ఫోన్‌లో eWeLink యాప్‌ను తెరవండి.
4. Tap the "Add" button to search for new devices.
5. Follow the on-screen instructions in the app to put the device into pairing mode and complete the connection.

Video demonstrating the Wi-Fi pairing process with the eWeLink app and controlling the device.

5.4 Device Pairing (RF 433MHz Remote Controller)

This section applies only to models that support RF 433MHz functionality.

1. Press and hold the RF433 pairing button on the smart switch for 4 seconds. The blue LED indicator will turn on.
2. While the blue LED is on, press any key on your RF 433MHz remote controller.
3. The channel will be successfully paired with the pressed key.
4. To pair other keys of the remote controller with other channels, repeat steps 1-3 for each desired key/channel.

5.5 Clearing RF 433MHz Pairing

This section applies only to models that support RF 433MHz functionality.

1. Press and hold the RF433 pairing button on the smart switch for 15 seconds. The blue LED indicator will turn off.
2. This action will clear all paired RF 433MHz remote controllers from the device.

6. ఆపరేటింగ్ సూచనలు

6.1 వర్కింగ్ మోడ్‌లు

The smart switch supports three working modes:

• ఇంచింగ్ మోడ్: When a channel is switched on, it will automatically turn off after 0.5 seconds. This mode is useful for momentary actions like opening/closing a garage door or pulsing a motor.
• స్వీయ-లాకింగ్ మోడ్: Each channel can be switched on or off independently. You can control all channels simultaneously or individually.
• Interlocking Mode: When one channel is switched on, all other channels will automatically switch off. This is ideal for applications where only one output should be active at a time, such as controlling motor direction.

Visual representation of the three working modes.

How to Change Working Mode in eWeLink App

You can activate Interlocking mode or set the Inching time directly within the eWeLink app. Note that if Interlocking mode is enabled first, you cannot change the Inching time.

1. Open the eWeLink app and select your device.
2. Navigate to 'Device Settings'.
3. For Inching mode, find 'Inching Settings' and adjust the duration (e.g., 0.5 seconds).
4. For Interlocking mode, find 'Interlock' and enable it.

App screenshots detailing the steps to configure Inching mode.

App screenshots detailing the steps to configure Interlock mode.

6.2 యాప్ నియంత్రణ

Control your connected home appliances from anywhere using the eWeLink app.

• బహుళ పరికర నియంత్రణ: One eWeLink app can manage multiple smart switches and other compatible devices.
• Multiple Phone Control (Share Control): You can share control of the smart switch with family members or colleagues, allowing multiple phones to operate the device.

Illustration of a single phone controlling multiple smart devices.

Illustration of a single smart device being controlled by multiple phones.

6.3 వాయిస్ నియంత్రణ

The smart switch is compatible with Amazon Alexa and Google Assistant, allowing for convenient voice control of your connected appliances.

• Link your eWeLink account to your Alexa or Google Assistant app.
• Use voice commands such as "Alexa, turn on the curtain switch" or "Hey Google, turn off Channel 1."

Demonstration of voice control functionality with popular smart assistants.

6.4 Timer & Schedule

Set up timing schedules to automatically turn your connected lights or appliances on and off at specific times. Each channel can have its own schedule, supporting up to 8 time schedules per channel.

Visual representation of setting up timed tasks and delayed tasks.

7. నిర్వహణ

• పరికరాన్ని శుభ్రంగా మరియు పొడిగా ఉంచండి. దుమ్ము, ధూళి లేదా తేమకు గురికాకుండా ఉండండి.
• పరికరంలో కఠినమైన రసాయనాలు లేదా రాపిడి క్లీనర్‌లను ఉపయోగించవద్దు.
• Regularly check all wiring connections to ensure they are secure and free from damage.
• If the device is not functioning correctly, refer to the troubleshooting section before attempting any repairs.

8. ట్రబుల్షూటింగ్

8.1 Device not connecting to Wi-Fi

• మీ Wi-Fi నెట్‌వర్క్ 2.4GHz అని నిర్ధారించుకోండి. పరికరం 5GHz నెట్‌వర్క్‌లకు మద్దతు ఇవ్వదు.
• Check the Wi-Fi signal strength at the device's location. Move the device closer to the router if necessary.
• Verify that you have entered the correct Wi-Fi password in the eWeLink app.
• Try resetting the device to factory settings (refer to the eWeLink app for specific instructions) and attempt the pairing process again.
• Ensure your router is online and functioning correctly.

8.2 RF Remote Controller not working

• Check the battery in the RF 433MHz remote controller. It requires a 27A 12V battery (not included).
• Ensure the remote controller is properly paired with the smart switch. If not, follow the RF pairing instructions in Section 5.4.
• If issues persist, try clearing the RF pairing (Section 5.5) and re-pairing the remote.

8.3 App control issues

• Verify that your smartphone has an active internet connection (Wi-Fi or mobile data).
• Ensure the smart switch is within range of your Wi-Fi router and the router is online.
• Update the eWeLink app to the latest version.
• If the device appears offline in the app, check its power supply and Wi-Fi connection.

9 వినియోగదారు చిట్కాలు

• For garage door control or motor applications, always ensure that the 'Interlock' mode is correctly configured in the eWeLink app. This prevents conflicting commands (e.g., opening and closing simultaneously) and ensures safe operation.
• While a USB 5V input port is present on some models, it is primarily for testing. For stable and permanent installations, it is recommended to use the screw terminal input with the appropriate AC/DC voltage.

10. వారంటీ మరియు మద్దతు

ఏవైనా ఉత్పత్తి సంబంధిత విచారణలు, సాంకేతిక మద్దతు లేదా వారంటీ క్లెయిమ్‌ల కోసం, దయచేసి విక్రేత లేదా తయారీదారుని నేరుగా సంప్రదించండి. కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదును ఉంచండి.