1. ఉత్పత్తి ముగిసిందిview
This manual provides essential information for the safe and effective use of the Silicone High-Voltage Cable. This cable is designed for applications requiring high voltage and temperature resistance, featuring a tinned copper core and silicone rubber insulation for flexibility and durability.
2. భద్రతా సమాచారం
హెచ్చరిక: అధిక వాల్యూమ్tage can cause severe injury or death. Installation and handling of this cable should only be performed by qualified personnel following all local and national electrical codes and safety regulations.
- Always disconnect power before installing or servicing high-voltagఇ కేబుల్స్.
- ఇన్సులేటెడ్ గ్లోవ్స్ మరియు కంటి రక్షణతో సహా తగిన వ్యక్తిగత రక్షణ పరికరాలను (PPE) ఉపయోగించండి.
- Ensure proper grounding and insulation for all connections.
- Avoid bending the cable sharply, which can damage the insulation or conductor.
- Regularly inspect the cable for any signs of damage, wear, or degradation.
3. సెటప్ మరియు ఇన్స్టాలేషన్
Proper installation is crucial for the performance and safety of high-voltage cables. Follow these general guidelines:
- తయారీ: Ensure the environment is clean, dry, and free from conductive dust or moisture.
- కేబుల్ రూటింగ్: Route the cable to minimize stress, sharp bends, and exposure to physical damage. Maintain adequate clearance from other conductors and heat sources.
- స్ట్రిప్పింగ్: Carefully strip the silicone insulation to expose the tinned copper conductor. Use a specialized cable stripping tool to prevent damage to the conductor strands.
- కనెక్షన్: Make secure and robust electrical connections using appropriate high-voltage connectors or terminals. Ensure all connections are clean and free of oxidation.
- ఇన్సులేషన్: After making connections, re-insulate exposed conductors and terminals using high-voltage rated insulation materials (e.g., heat shrink tubing, electrical tape) to maintain the cable's dielectric strength.
- పరీక్ష: Before energizing, perform continuity and insulation resistance tests to verify proper installation and integrity.
4. ఆపరేటింగ్ సూచనలు
Once installed and tested, the cable is ready for operation. Adhere to the following:
- Operate the cable within its specified voltagఇ మరియు ఉష్ణోగ్రత రేటింగ్లు.
- Monitor the cable and connections for any unusual heating, arcing, or other anomalies during operation.
- Ensure that the cable is not subjected to mechanical stress or abrasion during use.
- In case of any malfunction or damage, immediately de-energize the system and follow troubleshooting procedures.
5. నిర్వహణ
Regular maintenance helps ensure the longevity and safe operation of the cable.
- దృశ్య తనిఖీ: Periodically inspect the entire length of the cable for cuts, abrasions, cracks, discoloration, or swelling in the insulation.
- కనెక్షన్ తనిఖీ: Verify that all connections remain tight and free from corrosion.
- శుభ్రపరచడం: If necessary, clean the cable surface with a dry, lint-free cloth. Avoid using harsh chemicals or solvents that could degrade the silicone insulation.
- నిల్వ: When not in use, store the cable in a cool, dry place, away from direct sunlight, extreme temperatures, and corrosive substances. Coil the cable loosely to prevent kinks.
6. ట్రబుల్షూటింగ్
If you encounter issues with the cable, consider the following common problems and solutions:
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| No power/signal transmission | Loose or corroded connections, damaged conductor, incorrect wiring | Check and secure all connections. Inspect conductor for breaks. Verify wiring diagram. |
| కేబుల్ వేడెక్కడం | Overcurrent, inadequate ventilation, damaged insulation, improper gauge for load | Reduce load or use higher gauge cable. Ensure proper airflow. Inspect insulation for damage. |
| Insulation damage (cracks, cuts) | Physical stress, chemical exposure, excessive bending, aging | Replace damaged section or entire cable. Ensure proper routing and protection. |
| అడపాదడపా కనెక్షన్ | Loose connections, fatigued conductor strands | Re-terminate connections. Inspect conductor for fatigue. |
If problems persist after attempting these solutions, consult a qualified electrician or the product supplier.
7. స్పెసిఫికేషన్లు
| ఫీచర్ | వివరాలు |
|---|---|
| ఉత్పత్తి పేరు | Silicone High Voltagఇ కేబుల్ |
| మోడల్ సంఖ్య | AGG |
| టైప్ చేయండి | ఇన్సులేట్ చేయబడింది |
| ఇన్సులేషన్ మెటీరియల్ | సిలికాన్ రబ్బరు |
| కండక్టర్ మెటీరియల్ | Tin plated copper |
| కండక్టర్ రకం | Solid (stranded tinned copper) |
| వాల్యూమ్tagఇ రేటింగ్ | 200KV |
| కోర్ సైజు | 13AWG / 2.5మిమీ² |
| బయటి వ్యాసం (OD) | 21.7మి.మీ |
| ఉష్ణోగ్రత నిరోధకత | -60 ℃ నుండి +200 ℃ |
| ఫీచర్లు | High and low temperature resistance, high pressure resistance, flexible |
| మూలం | ప్రధాన భూభాగం చైనా |
| అనుకూలీకరణ | అవును (అనుకూలీకరించబడింది) |
| అధిక-సంభావ్య రసాయనం | ఏదీ లేదు |
8 వినియోగదారు చిట్కాలు
- అనుకూలతను ధృవీకరించండి: Always ensure the cable's specifications (voltage, current, temperature) match or exceed the requirements of your application.
- Proper Length: Purchase the exact length needed to avoid unnecessary splices or excess cable, which can introduce resistance or clutter. The cable is sold by the meter and will be sent uncut for multiple units.
- పర్యావరణ పరిగణనలు: While resistant to temperature extremes, protect the cable from harsh mechanical environments, sharp edges, and prolonged exposure to UV light if not rated for outdoor use.
- వృత్తిపరమైన సంస్థాపన: For critical or complex high-voltage applications, always seek installation and verification by certified professionals.
9. వారంటీ మరియు మద్దతు
For specific warranty information, return policies, or technical support, please refer to the seller or your point of purchase. Keep your purchase records for any warranty claims.
