1. పరిచయం
This manual provides essential information for the proper installation, operation, and maintenance of your LSW1234-10-1E Brushless Motor Controller. This controller is designed for use with 48V brushless motors in various electric vehicles, including electric bicycles, scooters, fat bikes, and mountain bikes (MTBs).
Important: Ensure the controller's protocols match your original system. Mismatched protocols will result in errors and improper function.
2. స్పెసిఫికేషన్లు
The LSW1234-10-1E Brushless Motor Controller features the following technical specifications:
| పరామితి | విలువ |
|---|---|
| మోడల్ | LSW1234-10-1E |
| టైప్ చేయండి | కంట్రోలర్ |
| వాల్యూమ్ రేట్ చేయబడిందిtage | 48V |
| గరిష్ట కరెంట్ | 22A |
| రేటింగ్ కరెంట్ | 11A |
| తక్కువ వాల్యూమ్tagఇ రక్షణ | 39V |
| థ్రాటిల్ సర్దుబాటు వాల్యూమ్tage | 1.2V-4.4V |
| కొలతలు (L x W x H) | 94mm x 49mm x 29mm |
| ఉత్పత్తి బరువు | 519గ్రా |
| ఉత్పత్తి సంఖ్య | LSW1234-10-1E X24040154 |
| మూలం | ప్రధాన భూభాగం చైనా |
స్పెసిఫికేషన్ లేబుల్
A close-up of the controller's specification label is provided below for reference.
Image: Controller specification label.
కొలతలు
The physical dimensions of the controller are illustrated below.
Image: Controller dimensions (Length: 112mm, Width: 63mm, Height: 33mm).
3. సెటప్ మరియు ఇన్స్టాలేషన్
Proper installation is crucial for the safe and correct functioning of your electric vehicle. Please follow these instructions carefully.
అనుకూలత తనిఖీ
Before installation, it is highly recommended to verify compatibility. If you are replacing an existing controller, compare the label information and wiring configuration with your original unit. If unsure, consult with a qualified technician or the seller by providing photos of your original controller's label and wiring.
వైరింగ్ రేఖాచిత్రం
Refer to the detailed wiring diagram below for connecting the controller to your electric vehicle's components. Each connection point is numbered and described.
Image: Wiring diagram for the LSW1234-10-1E controller.
- Motor Hall & Speed Signal: Connects to the motor's Hall sensors and speed signal output.
- Boost Sensors: Connects to the pedal assist system (PAS) or boost sensors.
- Lock SW (Switch): Connects to the ignition or power lock switch.
- ప్రధాన కేబుల్: The primary power and communication cable.
- వేగ పరిమితి: Connects to a speed limiting switch or sensor, if applicable.
- విద్యుత్ సరఫరా: Connects to the main battery power input.
- Motor (Phase A): One of the three phase wires for the brushless motor.
- Motor (Phase B): One of the three phase wires for the brushless motor.
- Motor (Phase C): One of the three phase wires for the brushless motor.
Caution: Always ensure power is disconnected from the battery before making or breaking any electrical connections. Incorrect wiring can damage the controller, motor, or battery.
4. ఆపరేటింగ్ సూచనలు
Once correctly installed, the LSW1234-10-1E controller manages the power delivery to your brushless motor based on throttle input and other sensor data (e.g., pedal assist). Its operation is integrated into your vehicle's overall system.
- పవర్ ఆన్: Turn on your vehicle's main power switch (connected to Lock SW).
- థొరెటల్ కంట్రోల్: Use the throttle to control the motor's speed. The controller translates your input into appropriate power output.
- Pedal Assist (if applicable): If your vehicle has boost sensors, the controller will provide motor assistance when you pedal.
- Speed Limiting (if applicable): If a speed limit function is connected, the controller will restrict the maximum speed accordingly.
5. నిర్వహణ
The LSW1234-10-1E controller is designed for durability and requires minimal maintenance. However, following these general guidelines can help prolong its lifespan:
- పొడిగా ఉంచండి: Protect the controller from water and excessive moisture. While it may have some water resistance, it is not fully waterproof.
- శుభ్రముగా ఉంచు: Periodically inspect the controller and its connections for dirt, dust, or debris. Clean gently with a dry cloth.
- భౌతిక నష్టాన్ని నివారించండి: Ensure the controller is securely mounted and protected from impacts or vibrations.
- కనెక్షన్లను తనిఖీ చేయండి: అన్ని వైరింగ్ కనెక్షన్లు సురక్షితంగా ఉన్నాయని మరియు తుప్పు లేదా నష్టం లేకుండా ఉన్నాయని నిర్ధారించుకోవడానికి వాటిని క్రమం తప్పకుండా తనిఖీ చేయండి.
6. ట్రబుల్షూటింగ్
If you encounter issues with your motor controller, consider the following common problems and solutions:
- Controller Not Functioning / Error Codes:
- ప్రోటోకాల్ సరిపోలలేదు: The most common issue is incompatibility with your vehicle's existing system. If the controller's communication protocols do not match your display meter or other components, it will not work. Verify compatibility before purchase and installation.
- వదులుగా ఉండే కనెక్షన్లు: Check all wiring connections (power, motor, throttle, sensors) to ensure they are firmly seated and not damaged.
- విద్యుత్ సరఫరా: Ensure the battery is charged and providing the correct voltage (48V). Check the main power supply connection to the controller.
- మోటార్ సమస్యలు: If the motor itself is faulty, the controller may not operate correctly. Test the motor if possible.
- అడపాదడపా ఆపరేషన్:
- Damaged Wiring: Inspect all wires for cuts, pinches, or fraying that could cause intermittent contact.
- వేడెక్కడం: Ensure the controller has adequate ventilation. Prolonged high-load operation in hot environments can cause overheating and temporary shutdown.
ట్రబుల్షూటింగ్ దశలు సమస్యను పరిష్కరించకపోతే, దయచేసి మరింత సహాయం కోసం విక్రేతను సంప్రదించండి.
7 వినియోగదారు చిట్కాలు
No specific user tips are available at this time. Always ensure to match the controller's specifications and protocols with your existing system for optimal performance and to avoid compatibility issues.
8. వారంటీ మరియు మద్దతు
For any questions, technical support, or warranty inquiries, please contact the seller directly through the platform where you purchased the product. Provide your order details and a clear description of the issue to facilitate a quicker resolution.
