DDPAI A400 4K డాష్ క్యామ్ యూజర్ మాన్యువల్

1. ఉత్పత్తి పరిచయం

1.1 స్వరూపం

The DDPAI A400 Dash Cam features a compact design with a 1.9-inch IPS display and a rotatable lens. Key components include:

1.2 ఫంక్షన్ బటన్లు

The device features several function buttons for easy control:

• Return/Settings: Used to navigate back or access settings.
• రికార్డింగ్ ఆన్/ఆఫ్: Toggles video recording.
• స్క్రీన్ ఆన్/ఆఫ్: Turns the display on or off, or enters screen saver mode.
• రీసెట్: Hold the confirm button for 6 seconds to reset the device.

1.3 ముఖ్య లక్షణాలు

The DDPAI A400 offers 4K Ultra HD recording, ADAS driving assistance, and robust connectivity. For detailed specifications, please refer to the 'Specifications' section.

2. ఇన్‌స్టాలేషన్ సూచనలు

2.1 మెమరీ కార్డ్ ఇన్‌స్టాలేషన్

The DDPAI A400 supports Micro-SD cards up to 256GB. A Class 10 or higher speed card is recommended for optimal performance.

1. Ensure the Dash Cam is powered off.
2. Insert the Micro-SD card into the slot (No. 8) until it clicks and locks in place.
3. To remove, gently push the card inward until it pops out, then pull it from the slot.

Note: Please format the memory card before first use to prevent errors and ensure smooth operation. Do not remove the memory card while the Dash Cam is turned on.

2.2 డాష్ కామ్ ఇన్‌స్టాలేషన్

The Dash Cam can be installed using various power supply methods. The following steps outline the general installation process:

1. Wipe the front windshield: Clean the area where the dash cam will be mounted with a soft cloth to ensure the bracket adheres firmly.
2. Power on the Dash Cam: Connect the dash cam to your car's power source using the provided Type-C power cord. The dash cam will automatically start recording when the car is powered on.
3. Determine the installation position and adjust the lens angle:
   a. Connect the Dash Cam to the DDPAI App on your mobile phone (refer to Section 3).
   b. In the app, navigate to "Device Settings" > "ADAS intelligent assistance reminder" > "Adjust ADAS installation position".
   c. Select "Go to live preview" to enter the calibration interface and follow the on-screen instructions to adjust the dash cam's position for optimal recording angle.
4. Stabilize the Dash Cam:
   a. Attach the electrostatic sticker to the chosen installation position on the windshield.
   b. Peel off the film from the 3M sticker on the bracket and firmly attach the bracket to the center of the electrostatic sticker.
5. వైరింగ్: Route the power cord from the cigarette lighter receptacle to the dash cam, tucking the cord into the plastic guard plate of the car using the provided pry tool for a neat installation.

2.3 Alternative Wiring Options

For advanced parking monitoring features and a cleaner installation, consider these options:

• Connect the Fuse Box (Intelligent Hardwire Kit is Required): This method ensures neatness and enables parking monitoring. However, the wiring is complex and professional installation is recommended to avoid vehicle damage. The intelligent hardwire kit needs to be purchased separately.
• Connect the OBD Interface (OBD Power Cable is Required): This method is easier to operate and also supports parking monitoring. Plug the Type-C connector of the OBD power cable into the Dash Cam and the other end into the vehicle's OBD port. The OBD power cable needs to be purchased separately.

3. యాప్ కనెక్షన్

3.1 Downloading the DDPAI App

The DDPAI App is essential for controlling the dash cam, viewఇంగ్ ఫూtage, and adjusting settings. Download it from your device's app store:

• Android కోసం: కోసం వెతకండి "DDPAI" in the Google Play Store.
• iOS కోసం: కోసం వెతకండి "DDPAI" in the App Store.

3.2 బ్లూటూత్ కనెక్షన్

Follow these steps to connect your dash cam via Bluetooth:

1. Power on the Dash Cam. The device will display a boot screen with language and date/time settings. Select your language and confirm.
2. మీ మొబైల్ ఫోన్‌లో బ్లూటూత్‌ని ఆన్ చేయండి.
3. Launch the DDPAI App, tap "Device" > "+ Add a device".
4. Select the current device name (e.g., "DDP1BXXXX") from the detected Bluetooth device list.
5. Press the confirm button on the dash cam to authorize the connection.

Note: If you fail to find the device, tap "Rescan" in the app. The device can only connect to one phone at a time. To connect a different phone, disconnect from the current one first.

3.3 Wi-Fi కనెక్షన్

After a successful Bluetooth connection, you need to connect via Wi-Fi to access full features like live preview and album viewing.

• iPhoneల కోసం:
  1. In the DDPAI App, tap "Go to connection" > "WLAN".
  2. Go to your phone's Wi-Fi settings, select "pictrey_A400_XXXX", and enter the default password (1234567890). Tap "Join".
• ఆండ్రాయిడ్ ఫోన్‌ల కోసం:
  1. If Wi-Fi is enabled on the dash cam, your phone should automatically connect. If not, launch the DDPAI App, go to "Device" > "+ Add a device", then "Device with screen".
  2. Tap "Next" > "Connect to Wi-Fi" and select "pictrey_A400_XXXX" from the list. Enter the default password (1234567890) and tap "Connect".

4. పరికర ఇంటర్ఫేస్

4.1 పరికర ఇంటర్‌ఫేస్ వివరణ

Upon powering on, the dash cam displays a boot screen for initial setup. After setup, it transitions to the main interface.

• Boot Screen: Guides you through initial language and time settings.
• హోమ్ స్క్రీన్: Displays the status bar (recording status, date, time, memory card, Wi-Fi, audio recording), real-time video preview, and function buttons.
• సెట్టింగ్‌ల ఇంటర్‌ఫేస్: Accessed via the settings button, allows configuration of various recorder parameters.

4.2 పరికర చిహ్నం వివరణ

The following table explains the icons displayed on the dash cam's screen:

5. ఫంక్షన్ పరిచయం

5.1 వీడియో ఫంక్షన్

The DDPAI A400 provides various video functionalities:

• ముందుగాview వీడియో: View లైవ్ ఫూtage directly on the device screen or through the DDPAI App. In the app, tap the landscape preview icon or rotate your phone horizontally for full-screen view.
• ప్లేబ్యాక్ వీడియో: In the app's real-time preview interface, drag the progress bar to select a time, then tap the thumbnail or wait 5 seconds for playback. Different colors on the timeline indicate emergency events (red) or parking monitoring (yellow).
• Download Video:
      Method 1: From the playback interface, drag the progress bar to the desired time, tap the download icon, then "Complete" to save to your local album.
      Method 2: In the "Device" interface, long-press the video/photo file to enter selection mode, select files, and tap "Download".

Note: Downloaded videos are saved to your phone's local album and can be shared or deleted from there. Each video segment is typically 5 seconds to 3 minutes long.

5.2 ఫోటోలు తీయడం

The dash cam supports two modes for taking photos:

• Collision Sensing Photography: The dash cam automatically takes pictures when it detects a collision or emergency braking.
• Manual Photography: ముందుview interface, tap the camera icon to take a photo.

Note: Collision-sensing and voice-triggered photos generate associated videos (default 10 seconds) and are saved in the "Snap"/"Emergency" tab of the "Device Album".

5.3 పార్కింగ్ మానిటరింగ్

When an intelligent hardwire kit is used, the dash cam can enter parking monitoring mode automatically after the vehicle is turned off. This feature requires an Intelligent Hardwire Kit (purchased separately).

• Time-Lapse Recording Mode: Records at 1 frame per second, saving storage while capturing smooth footage. If a collision occurs, it takes a photo and records a short video, then returns to time-lapse.
• సాధారణ వీడియో రికార్డింగ్: Maintains normal recording after the car is turned off.
• స్లీప్ మోడ్: The device enters sleep mode after the vehicle is turned off. If a collision is detected, it captures a photo and a 30-second video, then returns to sleep. If low voltage is detected, the device shuts down.

5.4 ఘర్షణ గుర్తింపు & లాక్ చేయబడిన వీడియోలు

In working mode, the dash cam generates an emergency photo and video upon detecting a collision or sudden braking. These files are protected from loop recording overwrites.

• Setting Camera Sensitivity: Adjust the sensitivity (High, Medium-high, Medium, Medium-low, Low, Off, Custom) in the app under "Device Settings" > "Adjust collision sensitivity". Higher sensitivity means easier triggering of recordings.
• Set the Duration of Related Videos: The default is 10 seconds. Options include 10s, 20s, and 30s, determining the length of video recorded before and after a collision.

5.5 అడ్వాన్స్‌డ్ డ్రైవర్ అసిస్టెన్స్ సిస్టమ్ (ADAS)

The ADAS feature provides real-time alerts for a safer driving experience.

• Enable ADAS Function: In the DDPAI App, go to "Device Settings" and turn on the "Advanced Driver Assistance System" switch.
• Set Sensitivity of ADAS: Configure the sensitivity for alerts like vehicle ahead movement and fatigue driving.
• Fatigue Driving Voice Alert: Enable this in the app to receive voice prompts reminding you to rest during long drives.

5.6 డేటా ట్రాన్స్మిషన్

రికార్డ్ చేయబడిన యాక్సెస్ చేయడానికి files directly, remove the Micro-SD card from the dash cam, insert it into a card reader, and connect it to a computer. Browse the "DCIM" folder for photos and videos.

• 200 వీడియో: Contains regular and time-lapse recordings. Time-lapse files are prefixed with "S".
• 201 Photo: Includes voice-triggered and collision-triggered photos. Front camera snapshots are prefixed with "N", while collision-triggered photos are prefixed with "G".

6. నిర్వహణ

6.1 ఫర్మ్‌వేర్ అప్‌గ్రేడ్

To ensure your dash cam has the latest features and improvements, regularly check for firmware updates:

1. Open the DDPAI App and connect to the Dash Cam's Wi-Fi.
2. Go to "Me" > "About DDPAI" > "Check version".
3. The app will automatically detect if new firmware is available. Follow the on-screen instructions to upgrade.

Note: Do not cut off power during an upgrade to prevent damage. If an upgrade fails due to power loss, contact customer service for assistance.

6.2 భద్రతా జాగ్రత్తలు

• Do not operate the Dash Cam or watch videos on your mobile phone while driving. Prioritize driving safety.
• Do not install the Dash Cam in a location that obstructs your driving view.
• Use only the power cord included in the package to avoid fire or electric shock.
• Use a branded Micro-SD card (up to 256GB). Format it through the app before use. Do not insert or remove the card while the device is on.
• Do not attempt to open or repair the Dash Cam yourself. Contact official customer service for issues.
• If using an external power adapter, ensure it meets standard requirements.

7. ట్రబుల్షూటింగ్ (తరచుగా అడిగే ప్రశ్నలు)

1. మెమరీ కార్డ్‌ని ఎలా ఫార్మాట్ చేయాలి?

You can format the memory card in three ways:
    Method 1: On the device, press the Settings button, select "Format", and confirm.
    Method 2: In the DDPAI App, connect to the device, go to "Camera Settings" > "Storage Management", and format.
    Method 3: Remove the card, insert it into a card reader, connect to a computer, and right-click to format the drive.

2. What is the Wi-Fi password of the Dash Cam?

The default Wi-Fi password is "1234567890". You can change it in the DDPAI App under "Camera Settings" > "Set WIFI Password".

3. Can I change the Wi-Fi password of the Dash Cam?

Yes. Connect to the Dash Cam via the app, go to "Device Settings" > "Device Wi-Fi Password", enter a new password, confirm, and save.

4. How do I reset the Dash Cam?

If the device is in an abnormal state, press the function button for approximately 6 seconds to reset it. The device will automatically restart after the reset.

5. What if I forget the Wi-Fi password?

Press the confirm button for approximately 6 seconds to reset the device. Then, reconnect using the default password (1234567890).

6. What should I do if the time is incorrect?

Connect your device to your mobile phone via the DDPAI app and ensure the app is connected to the camera's Wi-Fi. The camera will automatically synchronize with your phone's time.

8. స్పెసిఫికేషన్లు

Detailed technical specifications for the DDPAI A400 Dash Cam:

9. వారంటీ మరియు మద్దతు

The DDPAI A400 Dash Cam comes with a 1-year warranty covering hardware quality issues and non-human damages that cannot be resolved by software updates only.

For any product failures or inquiries, please contact official customer service for consultation and support.

10 వినియోగదారు చిట్కాలు

• బ్యాటరీ పర్యవేక్షణ: The DDPAI A400 supports battery monitoring during parking, but this feature requires an Intelligent Hardwire Kit and IPS Power Management. This helps prevent your car battery from draining.
• సరైన నిల్వ: For the best performance and to avoid storage issues, it is highly recommended to use a DDPAI U3 high-speed memory card. These cards are specifically optimized for dash cam recording.
• రెగ్యులర్ ఫార్మాటింగ్: To ensure smooth operation and prevent potential errors, format your Micro-SD card regularly through the DDPAI app.