TOOLTOP Network Cable Tester & Multimeter User Manual

1. పరిచయం

This manual provides detailed instructions for the operation and maintenance of your TOOLTOP Network Cable Tester and Multimeter (Models ET622 and ET623). Please read this manual thoroughly before using the device to ensure safe and efficient operation.

ఉత్పత్తి ముగిసిందిview వీడియో

2. ఉత్పత్తి లక్షణాలు

• Network Cable Length Measurement: Measures lengths from 2.5 to 400 meters for RJ45 (8-core or 4-core), telephone, and BNC video cables.
• Crystal Head Crimping Test (QC): Verifies proper crimping and connection of network cables.
• Cable Mapping: Detects open circuits, crossovers, and short circuits in network cables.
• Digital Line Search: Noise-free tracing to quickly locate target lines, with adjustable sensitivity.
• POE Test: Determines polarity and displays voltage value for standard and non-standard (IEEE802.3AF/AT) Power over Ethernet.
• హై-రిజల్యూషన్ డిస్‌ప్లే: Features a 3.2-inch color LCD for clear and intuitive results.
• Multimeter Function (ET623 only): DC/AC వాల్యూమ్‌ను కలిగి ఉంటుందిtage, DC/AC Current, Resistance, Capacitance, Continuity, and Diode testing.
• పునర్వినియోగపరచదగిన బ్యాటరీ: The host unit uses a 1250mAh rechargeable lithium battery.
• ఫ్లాష్‌లైట్: Built-in flashlight for convenience in low-light conditions.
• ఆటో పవర్ ఆఫ్: బ్యాటరీ జీవితకాలాన్ని ఆదా చేస్తుంది.

చిత్రం: పైగాview ఉత్పత్తి లక్షణాలు.

3. ప్యాకేజీ విషయాలు

ET622 Package List:

• 1 x Network Cable Tester (Main Unit)
• 1 x రిసీవర్
• 1 x USB కేబుల్
• 1 x RJ45 కేబుల్
• 1 x Crocodile Clip
• 1 x ఆంగ్ల వినియోగదారు మాన్యువల్
• 1 x నిల్వ పెట్టె

Image: ET622 Package Contents.

ET623 with 3 ID Package List:

• 1 x Network Cable Tester (Main Unit)
• 1 x రిసీవర్
• 1 x USB కేబుల్
• 1 x RJ45 కేబుల్
• 1 x Crocodile Clip
• 1 x ఆంగ్ల వినియోగదారు మాన్యువల్
• 1 x నిల్వ పెట్టె
• 1 x Multimeter Test Leads
• 3 x Remote ID

Image: ET623 Package Contents with 3 ID remotes.

4. పరికర లేఅవుట్ మరియు నియంత్రణలు

Image: Product Description and Labeled Components.

Main Unit (Tester)

• LCD కలర్ స్క్రీన్: 3.2-inch display for test results and menu navigation.
• USB ఛార్జింగ్ పోర్ట్: అంతర్గత లిథియం బ్యాటరీని రీఛార్జ్ చేయడానికి.
• RJ45 పోర్ట్‌లు: For connecting network cables for testing.
• కీప్యాడ్: For mode selection and navigation.
• Multimeter Input Jacks (ET623 only): For connecting test leads for multimeter functions.

Wire Tracker Receiver

• Tracing Sensor: Used to detect signals from the main unit for cable tracing.
• Sound/Sensitivity Adjusting Wheel: Controls the volume and sensitivity of the tracing function.
• మోడ్ బటన్: Switches between digital and analog tracing modes.
• ఫ్లాష్‌లైట్: Provides illumination during cable tracing.
• RJ45 జాక్: For connecting to cables during tracing.

5. సెటప్ మరియు ప్రాథమిక ఆపరేషన్

5.1 పవర్ చేయడం ఆన్/ఆఫ్

• Press and hold the power button on the main unit to turn it on or off.
• The device features an auto power-off function to conserve battery.

5.2 పరికరాన్ని ఛార్జ్ చేస్తోంది

• Connect the main unit to a USB power source using the provided USB cable.
• The host unit has a 1250mAh rechargeable lithium battery.
• The receiver unit (if applicable) uses a 9V battery (not included).

6. ఆపరేటింగ్ సూచనలు

6.1 Network Cable Length Measurement

1. Connect one end of the network cable to the main unit's RJ45 port.
2. Select the "Length" function on the device.
3. The device will display the cable length (2.5m to 400m).

Image: Network Cable Length Measurement.

6.2 Cable Mapping

1. Connect one end of the network cable to the main unit and the other end to the receiver.
2. Select the "Mapping" function.
3. The display will show the wiring status (Normal, Short, Cross, Break).

Image: Cable Mapping Display.

6.3 Crystal Head Crimping Test (QC)

1. Connect the crimped RJ45 cable to the main unit.
2. Select the "QC" function.
3. The device will indicate if the crimping is correct or if there are issues (e.g., "Line 1-core wire is not properly crimped, and the No.1 light does not light up").

Image: QC-Connector Crimping Test.

6.4 Tracing Cables (Scan)

1. Connect the network cable to the main unit.
2. Select the "Scan" function.
3. Use the receiver to trace the cable. The receiver will emit a sound (digital mode) or vibrate (vibration mode) when near the cable. Adjust sensitivity as needed.

Image: Tracing Cables (Digital Mode).

6.5 POE Testing

1. Connect the network cable from a POE source (e.g., POE switch) to the main unit.
2. Select the "POE" function.
3. The device will display the POE voltagఇ మరియు ధ్రువణత.

Image: POE Testing.

6.6 Port Flash

1. Connect the network cable to the main unit and to a network device (e.g., switch).
2. Select the "Flash" function.
3. The corresponding port light on the network device will blink, helping to identify the connected port.

Image: Switch Port Flicker (Port Flash).

6.7 Remote ID Mapping (Optional for ET623)

• For ET623 models with Remote ID units, connect the remote ID unit to the far end of the cable.
• The main unit will display the ID of the connected remote, allowing for identification of multiple cable runs.

Image: Remote ID Mapping.

6.8 Multimeter Functions (ET623 Only)

The ET623 model integrates a full-featured multimeter. Connect the provided multimeter test leads to the appropriate jacks on the main unit.

• AC/DC వాల్యూమ్tage: వాల్యూమ్‌ను కొలవండిtage by selecting the appropriate mode and connecting leads to the circuit.
• AC/DC Current: Measure current by selecting the appropriate mode and connecting leads in series with the circuit.
• ప్రతిఘటన: Measure resistance by selecting the resistance mode and connecting leads across the component.
• కెపాసిటెన్స్: Measure capacitance by selecting the capacitance mode and connecting leads across the capacitor.
• కొనసాగింపు: Test for continuity with an audible buzzer.
• డయోడ్: Test diode functionality.

Image: Multimeter Functions (Continuity, Diode, Capacitance, AC/DC Current).

7. స్పెసిఫికేషన్లు

7.1 Network Cable Tester Specifications

Image: Product Parameters Comparison (ET622 vs ET623).

7.2 Multimeter Specifications (ET623 Only)

Image: Multimeter Specifications (ET623).

8. నిర్వహణ

• పరికరాన్ని శుభ్రంగా మరియు పొడిగా ఉంచండి. ఒక మృదువైన ఉపయోగించండి, డిamp శుభ్రం చేయడానికి వస్త్రం; రాపిడి క్లీనర్లు లేదా ద్రావకాలను ఉపయోగించవద్దు.
• ఉపయోగంలో లేనప్పుడు పరికరాన్ని దాని రక్షణ కేసులో నిల్వ చేయండి, తద్వారా నష్టం జరగదు.
• Ensure the battery is charged regularly, especially if the device is stored for extended periods.
• Replace the receiver's 9V battery when the low battery indicator appears.

9. ట్రబుల్షూటింగ్

• పరికరం ఆన్ చేయడం లేదు: Check battery level and ensure it is charged. For the receiver, check the 9V battery.
• Inaccurate length measurement: Ensure the cable is properly connected and undamaged. Verify the cable type is supported.
• Cable mapping errors: Re-crimp connectors if necessary. Ensure connections are secure.
• Tracing signal is weak or absent: Adjust the sensitivity on the receiver. Ensure the main unit is transmitting a signal. Check for excessive electromagnetic interference.
• Multimeter readings are incorrect (ET623 only): Ensure test leads are correctly inserted and making good contact. Check the battery level.

10 వినియోగదారు చిట్కాలు

• For best results in cable tracing, try to minimize interference from other electronic devices.
• When performing crimping tests, ensure the cable ends are cut cleanly and inserted fully into the RJ45 connector before crimping.
• Always refer to the display prompts for connection status and error messages.
• Keep the remote ID units organized and labeled if you are using multiple for large installations.

11. వారంటీ మరియు మద్దతు

వారంటీ సమాచారం, సాంకేతిక మద్దతు లేదా సేవా విచారణల కోసం, దయచేసి మీ రిటైలర్ లేదా తయారీదారు అధికారి అందించిన సంప్రదింపు సమాచారాన్ని చూడండి. webసైట్. కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదుని ఉంచండి.