DDPAI N5 డ్యూయల్ డాష్ కామ్ యూజర్ మాన్యువల్

1. ఉత్పత్తి పరిచయం

1.1 స్వరూపం

Familiarize yourself with the components of your DDPAI N5 Dual Dash Cam:

Figure 1: DDPAI N5 Dual Dash Cam (Front and Rear Cameras)

Figure 2: DDPAI N5 Dual Dash Cam Components

1.2 కాంపోనెంట్ ఓవర్view

1.3 Indicator Guide

The indicator light provides visual feedback on the device's status:

2. స్పెసిఫికేషన్లు

Detailed technical specifications for the DDPAI N5 Dual Dash Cam:

3. ప్యాకేజీ విషయాలు

ప్రామాణిక ప్యాకేజీలో ఈ క్రింది అంశాలు ఉన్నాయి:

Figure 3: Standard Packing List

• N5 Dual (Main Unit)
• వెనుక కెమెరా
• కార్ ఛార్జర్
• పవర్ కేబుల్ (ముందు)
• 5.5 m Power Cable (Rear)
• Prying Rod
• వినియోగదారు మాన్యువల్
• 3M Adhesive * 2
• Electrostatic Sticker * 2

If you purchased a package including the Radar Module, it will contain additional items:

Figure 4: Radar Module Package Contents

• రాడార్ మాడ్యూల్
• OBD ఇంటెలిజెంట్ హార్డ్‌వైర్ కిట్
• వినియోగదారు మాన్యువల్
• ఎలెక్ట్రోస్టాటిక్ స్టిక్కర్
• 3M అంటుకునే

4. ఇన్‌స్టాలేషన్ సూచనలు

4.1 మెమరీ కార్డ్ ఇన్‌స్టాలేషన్

The Dash Cam supports Micro-SD cards up to 512GB (UHS-3 or higher speed).

1. మెమరీ కార్డ్‌ని ఇన్‌స్టాల్ చేయండి: Ensure the Dash Cam is powered off. Insert the memory card halfway into the slot (refer to the silkscreen pattern). Use a fingernail or paper clip to push the card inward until it clicks and locks.
2. మెమరీ కార్డ్ తొలగించండి: Gently push the card's edge inward until it clicks and pops out, then pull it out.

గమనిక: Purchase a branded Micro-SD card. Format the memory card before first use to prevent errors. Do not remove the card while the Dash Cam is on.

4.2 డాష్ కామ్ ఇన్‌స్టాలేషన్

The Dash Cam can be powered via a cigarette lighter or a hardwire kit (sold separately).

సిగరెట్ లైటర్ పవర్ సప్లై

1. Step 1: Wipe the front windshield. Use a clean, soft cloth to ensure the bracket sticks firmly.
2. Step 2: Power on the Dash Cam. Insert the car charger into the cigarette lighter, then connect the Dash Cam to the car charger using the included Type-C power cord. The Dash Cam will automatically start and begin recording when the car starts.
3. Step 3: Determine the installation position and adjust the lens angle.
   1. Connect the Dash Cam to your mobile phone via the DDPAI App (see Section 5).
   2. In the app, go to "Device Settings" > "ADAS intelligent assistance reminder" > "Adjust ADAS installation position".
   3. Select "Go to live preview" > "Enter live preview" to access the calibration interface. Follow on-screen instructions to position the dash cam.
   4. After installation, tap "Calibration completed" in the app.
4. Step 4: Stabilize the Dash Cam.
   1. Attach the electrostatic sticker to the chosen installation position.
   2. Peel off the 3M sticker film from the bracket and stick it to the center of the electrostatic sticker.

   గమనిక: Pay attention to the direction and position of the 3M sticker. Confirm the recording angle is correct before attaching. The 3M sticker is disposable.

5. దశ 5: వైరింగ్. Route the power cord from the cigarette lighter receptacle to the Dash Cam, hiding it in the car's plastic guard plate using the prying rod.

గమనిక: The cigarette lighter receptacle's position may vary by car model. The wiring diagram is for reference only.

ఫ్యూజ్ బాక్స్‌ను కనెక్ట్ చేయండి (ఇంటెలిజెంట్ హార్డ్‌వైర్ కిట్ అవసరం)

This method provides a neat installation and enables parking monitoring. Professional installation is recommended to avoid vehicle damage. The intelligent hardwire kit must be purchased separately.

OBD ఇంటర్‌ఫేస్‌ను కనెక్ట్ చేయండి (OBD పవర్ కేబుల్ అవసరం)

This method is easy to operate and enables parking monitoring.

1. Plug the Type-C connector of the OBD power cable into the Dash Cam's Type-C port.
2. Connect the other end of the OBD power cable to the vehicle's OBD port.

గమనిక: The OBD power cable needs to be purchased separately. The location of the OBD interface varies by car model; the figure is for reference only.

4.3 Connect the Rear Camera (Optional)

1. Step 1: Clean the rear windshield.
2. Step 2: Connect the rear camera to the rear power cable.
3. Step 3: Insert the connector. Fully insert the metal part of the connector into the jack only when the device is powered off.
4. Step 4: Route the rear power cable. Route the cable from the Dash Cam to the rear camera.
5. Step 5: Fix the rear camera. Remove the red backing film from the adhesive sticker, adjust the field of view, and fix the rear camera to the inner wall of the rear windshield.

గమనిక: Install the rear camera with the lens facing the rear windshield and the "DDPAI" logo visible.

4.4 Connect the Radar Module (Optional)

The Radar Module and hardwire kit are not included in the standard package and must be purchased separately. For detailed installation instructions, refer to the video by scanning the QR code provided in the original manual.

4.5 Connect the 4G-Cloud Box (Optional)

The 4G-Cloud Box is not included in the standard package and must be purchased separately. For detailed installation instructions, refer to the video by scanning the QR code provided in the original manual.

5. యాప్ కనెక్షన్

గమనిక: The app is regularly updated, so actual operations may differ slightly from this manual. Follow the prompts in the DDPAI App.

5.1 DDPAI యాప్ డౌన్‌లోడ్ చేసుకోవడం

Scan the QR code below or search for "DDPai" in the Google Play Store (Android) or App Store (iOS) to download the DDPAI App.

Figure 5: DDPAI App Download QR Code

5.2 బ్లూటూత్ కనెక్షన్

For first-time use, connect the dash cam to your mobile phone via Bluetooth.

1. Step 1: Power on the Dash Cam and enable Bluetooth on your mobile phone.
2. Step 2: Launch the DDPAI App, tap "Device" > "+ Add a device".
3. Step 3: Select the current device name (e.g., DDP1CXXXX) from the detected Bluetooth device list.
4. Step 4: Press the function button on the Dash Cam to authorize the connection.

గమనిక: If you cannot find the device, tap "Rescan". The device can only connect to one phone at a time. To connect a different phone, turn off Bluetooth on the connected phone, remove the device from the app, or reset the device.

5.3 Wi-Fi కనెక్షన్

After Bluetooth connection, you need to connect via Wi-Fi to view పరికర ఆల్బమ్, సెట్టింగ్‌లను సర్దుబాటు చేయండి లేదా ప్రీని యాక్సెస్ చేయండిview ఇంటర్ఫేస్.

iPhoneల కోసం:

1. Step 1: Tap "Go to connection" > "WLAN" in the app.
2. Step 2: Select the device's Wi-Fi (e.g., "DDPAI_N5Dual_XXXX"). Enter the password (default: 1234567890) and tap "Join".

ఆండ్రాయిడ్ ఫోన్‌ల కోసం:

If Wi-Fi is enabled, the system should automatically connect. If not, or if Bluetooth fails:

1. Launch the DDPAI app, go to "Device" page, tap "+ Add a device", then "Device without screen".
2. Tap "Next" > "Connect to Wi-Fi". Select the device's Wi-Fi and enter the password (default: 1234567890).

6. ఆపరేటింగ్ సూచనలు

6.1 వీడియో ఫంక్షన్

6.1.1 ప్రీview వీడియో

After connecting to the Dash Cam via the app, tap "Enter Device" to view నిజ-సమయ ముందుview. Tap the landscape preview icon or rotate your phone horizontally to enter full-screen mode.

గమనిక: ముందుగాview quality is lower; download for HD quality.

6.1.2 ప్లేబ్యాక్ వీడియో

1. రియల్ టైమ్ ప్రీని నమోదు చేయండిview ఇంటర్ఫేస్.
2. Drag the progress bar to select the desired time.
3. Tap the thumbnail or wait 5 seconds for playback to start.

The time progress bar uses different colors to indicate video types:

• ఎరుపు: Emergency event (e.g., sudden braking, collision).
• నారింజ: Parking monitoring mode recording.

6.1.3 వీడియో డౌన్‌లోడ్

విధానం 1:

1. Drag the progress bar to select the download start point.
2. Tap the download icon to enter the downloading interface.
3. Tap "Complete" to save the file to your local album.

గమనిక: Video length ranges from 5 seconds to 3 minutes.

విధానం 2:

1. On the "Device" interface, tap the selection icon.
2. వీడియో/ఫోటో పట్టుకోండి file to enter selection mode.
3. కావలసిన ఎంచుకోండి files and tap "Download".

6.2 ఫోటోలు తీయడం

The Dash Cam supports the following photo modes:

• Collision sensing photography: Automatically takes pictures during collisions or emergency braking.
• Voice photographing: Say "Take photo" to the Dash Cam MIC.
• రిమోట్ కంట్రోల్ ఫోటోగ్రఫీ: Press the wireless remote control (sold separately) to capture a picture.

గమనిక: Collision sensing and voice photography generate associated videos (10 seconds default duration). Photos and videos are saved in the "Snap"/"Emergency" tab of the "Device Album".

6.2.1 View పరికర ఆల్బమ్

After connecting to the Dash Cam, launch the DDPAI App and tap "Device Album" on the "Device" interface to view ఫోటోలు మరియు వీడియోలను స్వాధీనం చేసుకున్నారు.

గమనిక: Files are stored on the dash cam's memory, not downloaded to your phone. Connect to view లేదా డౌన్‌లోడ్ చేసుకోండి.

6.2.2 View స్థానిక ఆల్బమ్

Photos/videos downloaded to your phone are stored in the local album. Launch the app and tap the "Local Album" tab on the "Device" interface to view వాటిని.

స్నాప్‌షాట్/అత్యవసర పరిస్థితిని స్వయంచాలకంగా డౌన్‌లోడ్ చేయి files: In the app, go to "Me" > "APP Settings" and enable "Automatically download snapshot files" / "Automatically download emergency files".

6.3 పార్కింగ్ మానిటరింగ్

Requires an intelligent hardwire kit (sold separately). When the car is off, the Dash Cam enters parking monitoring mode. It takes photos and records videos during emergencies.

1. Connect to the Dash Cam via the app, then tap "Device Settings" > "Enter after the vehicle has stalled".
2. Select the parking monitoring mode:
   • Time-lapse video recording: Enters sleep mode after a set time, shuts down on low voltage. Wakes up on ignition. Records photos and collision events during time-lapse. Night vision (AI-ISP technology) is automatically enabled.
   • Normal video recording: Records normally after the car is off, enters sleep mode after a set time, shuts down on low voltage. Wakes up on ignition.
   • నిద్ర: Enters sleep mode. Records a photo and 30-second video on collision, then returns to sleep. Shuts down on low voltage. If collisions continue, it switches to time-lapse recording.

గమనిక: Parking monitoring requires the intelligent hardwire kit (optional).

6.4 ఘర్షణ గుర్తింపు & లాక్ చేయబడిన వీడియోలు

When the Dash Cam detects a collision (e.g., sudden braking), it generates an emergency photo and video, which are stored separately and not overwritten by loop recording.

6.4.1 కెమెరా సెన్సిటివిటీని సెట్ చేయడం

Adjust the collision sensor sensitivity to control when photos/videos are triggered. Higher sensitivity triggers more easily. Default is "Medium".

1. In the app, go to "Device" interface, tap "Device Settings" > "Adjust collision sensitivity".
2. Select "Driving" / "Parking" and set the appropriate sensitivity.

6.4.2 షూటింగ్ సమయంలో సంబంధిత వీడియోల వ్యవధిని సెట్ చేయండి

The default related video duration is 10 seconds, with options for 10s, 20s, and 30s.

1. In the app, go to "Device" interface, tap "Device Settings" > "Duration of related videos during shooting".
2. Set the duration:
   • 10సె: 5 seconds before and after collision.
   • 20సె: 10 seconds before and after collision.
   • 30సె: 15 seconds before and after collision.
   • ఆఫ్: Still generates an emergency video of 5 seconds before and after.

6.5 SR Mode

The SR (Sense Reality) function overlays driving data onto footage, creating unique videos.

6.5.1 View the Real-time SR Effects

1. Connect to the Dash Cam via the app and tap "Enter Device" to enter the preview ఇంటర్ఫేస్.
2. Turn on the "SR" switch in the lower-left corner of the preview తెర.

గమనిక: ముందుview shows real-time SR effect, not the final one. Tap "Data" to view వివరణాత్మక డేటా.

6.5.2 Generate and Share SR Videos

1. Launch the app, tap "Local Album", select a video, and turn on the "SR" switch.
2. Tap "Share". Crop the video, customize with SR effects and background music.
3. Tap "Confirm" to share to social media platforms.

గమనిక: SR data is for reference only; accuracy depends on Dash Cam installation.

6.6 GPS ఫంక్షన్

The Dash Cam supports GPS, which is on by default. In outdoor open areas, it receives GPS signals and records information like time, speed, altitude, direction, and driving track in the DDPAI App.

గమనిక: GPS signal reception can be affected by dense areas, underground parking, tunnels, and cloudy weather.

6.6.1 View Real-time Driving Trajectory and Current Location

1. Connect to the Dash Cam via the app and tap "Enter Device" to enter the preview ఇంటర్ఫేస్.
2. ముందుగాview interface, tap "Track" to view the driving trajectory and current location.

Figure 6: Real-time Driving Trajectory in App

6.6.2 View All Recorded Driving Trajectory

Launch the app, tap "Me" > "Driving Score" to view all driving track records.

గమనిక: You need to log in to the DDPAI App. It's recommended to enable "Allow to save the driving data" in "Me" > "App Settings" > "Advanced Settings" to store data in the cloud for synchronization.

6.7 అడ్వాన్స్‌డ్ డ్రైవర్ అసిస్టెన్స్ సిస్టమ్ (ADAS)

ADAS detects road conditions and provides voice alerts for front vehicle start and driver fatigue.

6.7.1 Calibrate the Advanced Driver Assistance System (ADAS)

ADAS needs calibration for different car models when first used or after installation changes.

1. Connect to the Dash Cam via the app, tap "Device Settings" > "ADAS intelligent assistance reminder" > "Adjust ADAS installation position".
2. Select "Go to live preview" > "Enter live preview" to enter the calibration interface.
3. After installation, tap "Calibration completed".

గమనిక: Re-calibrate ADAS if the Dash Cam's installation position or lens angle changes for accuracy.

6.7.2 Enable the ADAS Function

Connect to the Dash Cam via the app, tap "Device Settings", and turn on the "Advanced Driver Assistance System" switch.

• ప్రారంభించబడింది: Voice prompts are triggered under specific speeds and conditions.
  • Front Vehicle Start Reminder: "Front vehicle started" when the vehicle ahead moves from a stationary state.
  • డ్రైవర్ అలసట హెచ్చరిక: "You have been driving for four hours, please take a rest" after four consecutive hours of driving.
• డిసేబుల్: No intelligent assistance voice reminders.

6.7.3 Set the Sensitivity of ADAS

Adjust the sensitivity of smart alerts when ADAS is enabled.

• అధిక సున్నితత్వం: Wider detection, more frequent alerts (ideal for novice drivers).
• మధ్యస్థ సున్నితత్వం: Balanced detection for general driving (default).
• తక్కువ సున్నితత్వం: Limits alerts to high-risk scenarios (suitable for experienced drivers).

6.7.4 Fatigue Driving Voice Alert

Enable or disable fatigue driving alerts via the "ADAS Driver Assistance" switch. When enabled, voice prompts remind users to rest.

6.8 రిమోట్ కంట్రోల్

The wireless remote control (sold separately) allows you to capture photos of the current driving scene by pressing its button. A shutter sound will be emitted, and an associated video clip will be generated if enabled.

మొదటి ఉపయోగం ముందు:

Remove the transparent plastic strip from the remote. Press the remote; the blue indicator light will turn on, indicating it's ready.

జత చేయడం:

Before using, pair the remote with the dash cam.

1. Connect to the Dash Cam via the app, then tap "Device Settings" > "Remote Control Pairing".
2. Bring the remote close to the dash cam and press its button 3-5 times quickly. "Pairing Successful" will display, and the dash cam will emit a photo capture sound when the remote is pressed.

గమనిక: Complete pairing within 10 seconds. If unsuccessful, tap "Pair" again.

Replacing the Wireless Remote Battery:

The remote uses a standard 3V CR2032 lithium-manganese button battery. Replace if the indicator light doesn't turn on.

1. Hold the top and bottom of the remote and rotate it counterclockwise until it clicks. Open the remote.
2. Remove the old battery and insert a new 3V CR2032 battery with the text facing up. Close the lid and rotate clockwise until it clicks.

6.9 4G Interconnection

With a 4G-Cloud Box (sold separately) and a SIM card, the dash cam supports 4G functions like remote viewing, vehicle entry/exit notifications, cloud storage, and collision warnings. For details, scan the QR code provided in the original manual.

6.10 Radar Function

If the optional hardwire kit and radar module are installed, the radar detection function can be used in parking monitoring mode. The radar detects moving objects (people/vehicles) within its range, waking up the Dash Cam to record a 10-second video and generate a photo. If objects are continuously detected, it records normally for up to 2 minutes, then enters time-lapse recording. If no objects are detected for 30 seconds, it re-enters sleep mode.

గమనిక: Requires optional hardwire kit & radar module. The Dash Cam enters parking monitoring mode only when the radar detects no target for 5 seconds after the car is off.

6.10.1 Set the Radar Sensitivity

Adjust radar sensitivity to control how easily it identifies targets and triggers video recording. Options include high, medium-high, medium (default), medium-low, and low.

In the app, connect to the Dash Cam, open "Device Settings" > "AI-radar recognition" to adjust.

గమనిక: The radar function primarily focuses on motion detection for parking surveillance. It does not specifically detect or alert about fixed speed cameras.

6.11 డేటా ట్రాన్స్మిషన్

Recorded videos are saved to the Micro-SD card if inserted, or to the built-in eMMC storage if no card is present.

View/Export Memory Card Data:

Remove the Micro-SD card, insert it into a card reader, and connect to a computer. Open the "DCIM" folder to browse or edit files.

• 200 వీడియో: Contains regular and time-lapse recordings. Time-lapse files from the front camera are prefixed with "S".
• 201 Photo: Contains voice-triggered photos (prefixed with "N") and collision-triggered photos (prefixed with "G").

గమనిక: For dual-channel devices, "200video" and "201photo" directories are subdivided into "front" and "rear" folders.

View/Export eMMC Data:

Use a Type-C data cable (not included) to connect the dash cam to a computer. Open the "DCIM" folder to browse or edit files.

7. నిర్వహణ

7.1 ఫర్మ్‌వేర్ అప్‌గ్రేడ్

Open the DDPAI App, connect the Dash Cam Wi-Fi, and tap "Me" > "About DDPAI" > "Check version". The app will detect if there are new versions of the app or firmware. Follow on-screen instructions to upgrade.

గమనిక: Do not cut off power during upgrade to avoid damage. If an upgrade fails due to power outage, contact customer service, download the latest package, and copy it to the DCIM folder.

7.2 భద్రతా జాగ్రత్తలు

Read all precautions for correct and safe use:

• Do not debug the Dash Cam or watch videos on your phone while driving.
• Do not install the Dash Cam in a location that blocks your driving view.
• Use only the included power cord to avoid fire or electric shock.
• Use a branded Micro-SD card (up to 512GB). Do not insert/remove the card while the device is on. Format it via the app before use and regularly for maintenance.
• Do not open or repair the Dash Cam yourself. Contact official customer service for issues.
• The Dash Cam can be used in other places with an adapter.
• If using a power adapter, ensure it meets standard requirements.
• Pictures in this guide are for reference only; refer to the actual product.

8. ట్రబుల్షూటింగ్ (తరచుగా అడిగే ప్రశ్నలు)

1. How do I format a memory card?
   You can format the memory card or built-in storage.
   • Method 1 (via App): Connect to the Dash Cam via the app, go to "Camera Settings" > "Storage Management", and select to format.
   • Method 2 (via Computer): Remove the card, insert into a card reader, connect to computer, find the drive, right-click, select "Format" (FAT32, uncheck "Quick Format").
   • అంతర్నిర్మిత నిల్వ: Connect to the Dash Cam via the app, go to "Camera Settings" > "Storage Management", and select to format. (Note: Formatting built-in storage restarts the Dash Cam).
2. How to export driving video from the memory card?
   Use a card reader to connect the memory card to a computer and export the video.
3. What is the Wi-Fi password of the Dash Cam?
   The default Wi-Fi password is "1234567890".
4. Can I change the Wi-Fi password of the Dash Cam?
   Yes. Connect to the Dash Cam via the app, go to "Device Settings" > "Device Wi-Fi Password", enter a new password, confirm, and save.
5. నేను డాష్ కామ్‌ను ఎలా రీసెట్ చేయాలి?
   If abnormal, press the function button for approximately 6 seconds to reset. The device will automatically restart.
6. నేను Wi-Fi పాస్‌వర్డ్‌ను మరచిపోతే ఏమి చేయాలి?
   Press the function button for approximately 6 seconds to reset the device. Connect again using the default password "1234567890".
7. Why can't I see the image of my rear camera?
   Ensure the rear camera cable is firmly connected to the front camera. Then enter the app's preview interface and tap the switch icon to view the rear camera image.

9. వారంటీ మరియు మద్దతు

వారంటీ: ఉత్పత్తి 1-సంవత్సరం వారంటీతో వస్తుంది.

365-Day Free Replacement Guarantee: If the product has non-human quality defects within 365 days of delivery (or system auto-confirmation of receipt) and these cannot be resolved by software updates, a free replacement with a brand-new unit will be provided. You pay return shipping, and DDPAI covers delivery of the new replacement. To claim, provide your order number and proof of defect (e.g., video, SN code).

Figure 7: 365-Day Free Replacement Guarantee

10 వినియోగదారు చిట్కాలు

• Memory Card Recommendation: For optimal performance and reliability, it is recommended to use official DDPAI memory cards or known compatible brands such as Lexar, Kingston, Samsung, and Toshiba.
• ఇన్‌స్టాలేషన్ సహాయం: If your power cable or hardwire kit does not match your vehicle's interface, contact customer service for guidance.
• పార్కింగ్ పర్యవేక్షణ: To enable 24-hour parking monitoring, ensure you purchase and install the DDPAI hardwired kit separately.