ASRock STEEL LEGEND 1000W 80 ప్లస్ గోల్డ్ పవర్ సప్లై యూజర్ మాన్యువల్

1. పరిచయం

The ASRock STEEL LEGEND 1000W is an advanced ATX 3.1 computer power supply designed for high-performance systems. It features 80 PLUS GOLD and Cybenetics Platinum (efficiency) and Lambda A (acoustics) certifications, ensuring high energy efficiency and low noise operation. With 1000W of continuous power and 83.4A on a single 12V line, it is suitable for demanding gaming PCs, workstations, and video processing systems. Its fully modular design and flat cables facilitate clean cable management and improved airflow within the PC case. The STEEL LEGEND 1000W is built to meet current and future hardware demands, including support for PCIe 5.1 and a native 12V-2x6 connector.

2. భద్రతా సమాచారం

• WARNING: Do not open the housing - risk of electric shock. There are no user-serviceable parts inside. Opening the unit will void the warranty.
• Ensure the power supply is disconnected from the main power outlet before installation, removal, or cleaning.
• వేడి వనరులు, ప్రత్యక్ష సూర్యకాంతి మరియు తేమ నుండి దూరంగా, బాగా వెంటిలేషన్ ఉన్న ప్రదేశంలో విద్యుత్ సరఫరాను వ్యవస్థాపించండి.
• Use only the modular cables provided with this power supply. Using incompatible cables may damage the PSU and connected components.
• సిస్టమ్‌ను ఆన్ చేయడానికి ముందు అన్ని కనెక్షన్‌లు సురక్షితంగా ఉన్నాయని నిర్ధారించుకోండి.
• This power supply is equipped with multiple protection functions (OCP, UVP, SCP, OVP, OTP, OPP) to safeguard against electrical anomalies. If the unit shuts down unexpectedly, check for potential issues before restarting.

3. ప్యాకేజీ విషయాలు

మీ ప్యాకేజీలో అన్ని అంశాలు ఉన్నాయని ధృవీకరించండి:

• ASRock STEEL LEGEND 1000W Power Supply Unit
• Modular Cable Set (see details below)
• AC పవర్ కార్డ్
• మౌంటు స్క్రూలు

Figure 3.1: ASRock STEEL LEGEND 1000W PSU and Retail Packaging

Figure 3.2: Modular Cable Set

Modular Cable Overview:

• 1x 20+4 pin ATX Motherboard Connector
• 2x 4+4 pin EPS CPU Connectors
• 3x 6+2 pin PCIe Connectors (for graphics cards)
• 1x 12+4 pin PCIe 5.1 Connector (for latest generation graphics cards)
• 9x SATA Power Connectors
• 3x 4-pin Molex Peripheral Connectors

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

Follow these steps to install your ASRock STEEL LEGEND 1000W Power Supply:

1. మీ వ్యవస్థను సిద్ధం చేయండి: మీ కంప్యూటర్ పూర్తిగా పవర్ ఆఫ్ చేయబడిందని మరియు వాల్ అవుట్‌లెట్ నుండి అన్‌ప్లగ్ చేయబడిందని నిర్ధారించుకోండి. మీ కంప్యూటర్ కేస్‌ను తెరవండి.
2. పాత PSU ని తీసివేయండి (వర్తిస్తే): మీ పాత విద్యుత్ సరఫరా నుండి అన్ని కేబుల్‌లను డిస్‌కనెక్ట్ చేసి, దానిని కేసు నుండి తీసివేయండి.
3. కొత్త PSU ని మౌంట్ చేయండి: Carefully place the ASRock STEEL LEGEND 1000W into the PSU mounting bay of your computer case. Secure it with the provided screws. Ensure the fan is facing the correct direction for optimal airflow (usually facing down if there's a bottom vent, or up if not).
4. Connect Modular Cables to PSU: Identify the necessary cables for your components (motherboard, CPU, graphics card(s), SATA devices, etc.). Connect these cables to the corresponding modular ports on the power supply. Refer to the diagram below for port identification.

Figure 4.1: Modular Cable Connection Panel

5. Connect Cables to Components:
   • మదర్‌బోర్డ్: Connect the 20+4 pin ATX cable to your motherboard.
   • CPU: Connect the 4+4 pin EPS CPU cable(s) to your motherboard's CPU power connector(s).
   • Graphics Card(s): Connect the 6+2 pin PCIe cable(s) or the 12+4 pin PCIe 5.1 cable to your graphics card(s). Ensure you use the correct connector type for your specific GPU.
   • నిల్వ పరికరాలు: SATA పవర్ కేబుల్‌లను మీ SSDలు, HDDలు మరియు ఆప్టికల్ డ్రైవ్‌లకు కనెక్ట్ చేయండి.
   • పెరిఫెరల్స్: Connect Molex cables to any other peripherals requiring this type of power.
6. కేబుల్ నిర్వహణ: Route cables neatly to improve airflow and aesthetics. The flat cables provided are designed to assist with this.
7. తుది తనిఖీ: Double-check all connections to ensure they are firmly seated.

5. ఆపరేటింగ్ సూచనలు

Once the power supply is installed and all components are connected:

1. AC పవర్ కనెక్ట్ చేయండి: Plug the AC power cord into the power supply's inlet and then into a wall outlet.
2. Power On the PSU: Locate the main power switch on the rear of the power supply and flip it to the 'ON' (I) position.

Figure 5.1: Rear Panel with Power Switch and iCOOL Switch

3. Start Your Computer: మీ కంప్యూటర్ కేస్‌లోని పవర్ బటన్‌ను నొక్కండి.

iCOOL Mode

The ASRock STEEL LEGEND 1000W features an iCOOL MODE switch on the rear panel. This mode allows the fan speed to automatically adjust based on the power supply's temperature and load. When activated, the fan operates almost silently at low loads and increases speed for effective cooling under high loads. To enable or disable iCOOL MODE, toggle the switch next to the main power switch (refer to Figure 5.1).

6. నిర్వహణ

• శుభ్రపరచడం: Periodically clean the exterior of the power supply and its fan grille to prevent dust buildup. Use a soft, dry cloth or compressed air. Ensure the power supply is turned off and unplugged before cleaning.
• గాలి ప్రవాహం: Ensure that the power supply's intake and exhaust vents are not obstructed. Good airflow is crucial for efficient cooling and longevity.
• విడదీయవద్దు: Never attempt to open the power supply unit. High voltages are present inside, even when unplugged, and doing so will void your warranty.

7. ట్రబుల్షూటింగ్

If you encounter issues with your power supply, try the following steps:

• శక్తి లేదు:
  • Check if the AC power cord is securely plugged into both the power supply and the wall outlet.
  • Ensure the main power switch on the PSU's rear panel is in the 'ON' (I) position.
  • మరొక పరికరాన్ని ప్లగ్ చేయడం ద్వారా వాల్ అవుట్‌లెట్ పనిచేస్తుందో లేదో ధృవీకరించండి.
  • Check all modular cable connections to ensure they are firmly seated in both the PSU and the components.
• సిస్టమ్ ఊహించని విధంగా షట్ డౌన్ అవుతుంది:
  • The power supply's built-in protection mechanisms (OCP, OVP, OTP, OPP, UVP, SCP) may have activated due to an overload, overvoltage, overheating, or short circuit.
  • Ensure your system's power consumption does not exceed the PSU's capacity.
  • Check for proper ventilation around the PSU and inside the case to prevent overheating.
  • Disconnect non-essential peripherals to see if the issue persists.
• Fan Not Spinning (iCOOL Mode): If iCOOL Mode is enabled, the fan may not spin at low loads to maintain silent operation. This is normal. The fan will activate as the load and temperature increase. If the fan never spins even under heavy load, ensure iCOOL Mode is enabled or try disabling it to force the fan on.

If problems persist after performing these checks, contact ASRock customer support or your retailer for assistance.

8. స్పెసిఫికేషన్లు

Figure 8.1: ASRock STEEL LEGEND 1000W Power Supply Unit

9 వినియోగదారు చిట్కాలు

• కేబుల్ నిర్వహణ: అడ్వాన్ తీసుకోండిtage of the fully modular design and flat cables to keep your PC interior tidy. This not only improves aesthetics but also enhances airflow, contributing to better system cooling.
• సరైన శీతలీకరణ: Ensure your PC case has good airflow and that the PSU fan is not obstructed. If your case has a bottom intake, orient the PSU with the fan facing down.
• iCOOL Mode for Silence: If you prioritize quiet operation, especially during light tasks, ensure the iCOOL Mode is enabled. The fan will only spin up when necessary, keeping noise levels to a minimum.
• భవిష్యత్తు-రుజువు: The native PCIe 5.1 connector is designed for the latest high-power graphics cards. If you plan to upgrade your GPU in the future, this PSU is already equipped to handle it.

10. వారంటీ మరియు మద్దతు

The ASRock STEEL LEGEND 1000W Power Supply comes with a 10-year manufacturer's warranty, ensuring long-term reliability and peace of mind. For technical support, warranty claims, or further assistance, please contact ASRock customer service or your authorized retailer. Keep your proof of purchase for warranty validation.