JINGSHA H81M-I ITX Motherboard Kit User Manual

1. పరిచయం

This user manual provides detailed instructions for the installation, configuration, and maintenance of your JINGSHA H81M-I ITX Motherboard Kit. This kit is designed for compact PC builds and includes an H81M-I motherboard, an Intel Core i3 4150 processor, and 8GB of DDR3 1600MHz PC RAM. Please read this manual thoroughly before proceeding with installation to ensure proper setup and optimal performance.

2. ఉత్పత్తి లక్షణాలు

The following table details the specifications for the JINGSHA H81M-I ITX Motherboard and included components:

Included CPU Specifications (Intel Core i3 4150):

• Processor Series: Core i3 4150 (2 cores / 4 threads)
• Base frequency: 3.50GHz
• Socket type: LGA 1150
• కాష్: 3 MB
• Memory Types: DDR3-1333/1600, DDR3L-1333/1600
• Technology: 22nm
• టీడీపీ: 54W
• Processor Graphics: Intel HD Graphics 4400

Included Memory Specifications:

• Type: DDR3 PC Memory
• Frequency: DDR3 1600MHz
• కెపాసిటీ: 8GB

3. సెటప్ మరియు ఇన్‌స్టాలేషన్

Before beginning installation, ensure your workspace is clean and static-free. It is recommended to wear an anti-static wrist strap. Refer to the motherboard layout diagram for component locations.

3.1 CPU ఇన్‌స్టాలేషన్ (LGA 1150)

1. మదర్‌బోర్డుపై LGA 1150 CPU సాకెట్‌ను గుర్తించండి.
2. Gently push down the load lever and pull it away from the socket to open the CPU retention frame.
3. Carefully align the Intel Core i3 4150 CPU with the socket, ensuring the gold triangle on the CPU matches the triangle on the socket. Do not force the CPU into place.
4. CPU ని సాకెట్‌లోకి దించండి.
5. నిలుపుదల ఫ్రేమ్‌ను మూసివేసి, లోడ్ లివర్‌ను దాని లాక్ చేయబడిన స్థానానికి తిరిగి నెట్టండి.
6. CPU పైభాగానికి థర్మల్ పేస్ట్ యొక్క పలుచని, సమాన పొరను వర్తించండి.
7. Install the CPU cooler (not included in this kit) according to its manufacturer's instructions, ensuring it is securely fastened and making good contact with the CPU. Connect the CPU fan cable to the "3PIN CPU FAN header" on the motherboard.

3.2 మెమరీ (RAM) సంస్థాపన

1. Locate the two DDR3 memory slots ("2*DDR3 slot") on the motherboard.
2. Open the retention clips at both ends of the memory slot.
3. Align the 8GB DDR3 RAM module with the slot, ensuring the notch on the module matches the key in the slot.
4. Press down firmly on both ends of the RAM module until the retention clips snap into place.
5. If installing a second RAM module (up to 16GB total), repeat the process for the other DDR3 slot.

3.3 నిల్వ పరికర సంస్థాపన

3.3.1 M.2 SSD ఇన్‌స్టాలేషన్

1. Locate the "1*M.2 NVME_NGFF" port on the motherboard.
2. Insert your M.2 SSD into the slot at a slight angle.
3. Gently push down the SSD and secure it with the provided screw (not included with motherboard).

3.3.2 SATA డ్రైవ్ ఇన్‌స్టాలేషన్

1. Connect your SATA storage devices (HDD/SSD) to the "2*SATA3.0" or "1*SATA2.0" ports using SATA data cables.
2. Connect the SATA power cables from your power supply unit (PSU) to the SATA devices.

3.4 పవర్ కనెక్షన్లు

1. Connect the 24-pin ATX power connector from your PSU to the "24pin ATX connector" on the motherboard.
2. Connect the 8-pin 12V CPU power connector from your PSU to the "8PIN 12V connector" near the CPU socket.

3.5 ఫ్రంట్ ప్యానెల్ మరియు పెరిఫెరల్ కనెక్షన్లు

Refer to the motherboard layout diagram (Figure 3) for the exact location of these headers.

• ముందు ప్యానెల్ హెడర్‌లు: Connect the power switch (PWR SW), reset switch (RST SW), HDD LED, and Power LED (PWR LED) cables from your PC case to the "Front control panel header". Ensure correct polarity for LEDs.
• USB Headers: Connect your case's front USB 3.0 ports to the "F_USB3.0 header" and USB 2.0 ports to the "F_USB2.0 header".
• ఆడియో హెడర్: Connect your case's front audio panel to the "F_Audio Header".
• సిస్టమ్ ఫ్యాన్: Connect additional case fans to the "3PIN SYS FAN header".

3.6 వెనుక I/O ప్యానెల్ కనెక్షన్లు

Connect your peripherals to the appropriate ports on the rear I/O panel.

• USB పోర్ట్‌లు: Connect keyboards, mice, and other USB devices to the available USB 2.0 ports.
• వీడియో అవుట్‌పుట్‌లు: Connect your monitor(s) to the HD (HDMI) or VGA ports.
• LAN పోర్ట్: Connect an Ethernet cable for network access to the 1000Mbps Gigabit Ethernet port.
• ఆడియో జాక్స్: Connect speakers, headphones, or microphones to the 3-in-1 audio jacks.

4. ఆపరేటింగ్ సూచనలు

అన్ని భాగాలు ఇన్‌స్టాల్ చేయబడి, కనెక్ట్ చేయబడిన తర్వాత, మీరు మీ సిస్టమ్‌ను ఆన్ చేయవచ్చు.

4.1 మొదటి బూట్

1. Ensure all power cables are securely connected to the wall outlet and PSU.
2. మీ PC కేసులో పవర్ బటన్‌ను నొక్కండి.
3. The system should power on, and you should see a display output. If not, refer to the Troubleshooting section.
4. Access the BIOS/UEFI setup by pressing the designated key (usually DEL or F2) during startup to configure boot order, system time, and other settings.
5. Install your preferred operating system from a bootable USB drive or optical media.

4.2 డిస్ప్లే కాన్ఫిగరేషన్

The motherboard supports both HD (HDMI) and VGA outputs, allowing for dual-monitor setups. The Intel Core i3 4150 CPU includes integrated Intel HD Graphics 4400.

• Connect your primary monitor to either the HD or VGA port.
• For a second monitor, connect it to the remaining video output.
• Once the operating system is installed, you can configure display settings (resolution, extended desktop, etc.) within the OS.

4.3 నెట్‌వర్క్ కనెక్టివిటీ

The integrated RTL8111H Gigabit Ethernet controller provides high-speed wired network access.

• Connect an Ethernet cable from your router/modem to the RJ45 LAN port on the rear I/O panel.
• Ensure network drivers are installed (usually automatically by modern operating systems or available from the manufacturer's webసైట్).

5. నిర్వహణ

Regular maintenance helps ensure the longevity and stable performance of your PC components.

5.1 దుమ్ము నిర్వహణ

• Periodically clean the inside of your PC case using compressed air to remove dust buildup from fans, heatsinks, and components. Dust can impede airflow and lead to overheating.
• మీ కేస్‌లో కేబుల్‌లను నిర్వహించడం ద్వారా మరియు ఫ్యాన్‌లకు అడ్డంకులు లేకుండా చూసుకోవడం ద్వారా సరైన గాలి ప్రవాహాన్ని నిర్ధారించుకోండి.

5.2 BIOS నవీకరణలు

• The motherboard uses an AMI EFI BIOS. Check the JINGSHA support website for any available BIOS updates.
• Only update the BIOS if necessary (e.g., for new CPU support, stability improvements, or specific bug fixes) and follow the instructions carefully to avoid damaging the motherboard.

5.3 కాంపోనెంట్ చెక్

• Occasionally check that all cables (power, SATA, front panel) are securely connected.
• Ensure the CPU cooler is firmly seated.

6. ట్రబుల్షూటింగ్

మీరు సమస్యలను ఎదుర్కొంటే, క్రింది ట్రబుల్షూటింగ్ దశలను ప్రయత్నించండి:

• పవర్ లేదు:
  • Check all power connections: 24-pin ATX, 8-pin 12V CPU, and power supply to wall outlet.
  • విద్యుత్ సరఫరా స్విచ్ 'ఆన్' స్థానంలో ఉందని నిర్ధారించుకోండి.
  • Verify the front panel power switch cable is correctly connected to the motherboard header.
• డిస్‌ప్లే అవుట్‌పుట్ లేదు:
  • Ensure the monitor is connected to the correct video output (HD or VGA) on the motherboard.
  • Check that the monitor is powered on and set to the correct input source.
  • Reseat the RAM modules. Incorrectly seated RAM is a common cause of no display.
  • If using a dedicated graphics card (in the PCIe x16 slot), ensure the monitor is connected to the graphics card, not the motherboard's integrated ports.
• System Instability/Crashes:
  • Check CPU and system temperatures. Overheating can cause instability.
  • RAM మాడ్యూల్స్ సరిగ్గా అమర్చబడి ఉన్నాయని నిర్ధారించుకోండి.
  • తప్పు RAM కోసం తనిఖీ చేయడానికి మెమరీ డయాగ్నస్టిక్ సాధనాలను అమలు చేయండి.
  • Verify all drivers (chipset, graphics, network) are up to date.
• Storage Device Not Detected:
  • Check SATA data and power cable connections for SATA drives.
  • For M.2 SSDs, ensure it is correctly seated and secured.
  • Check BIOS settings to ensure SATA ports are enabled and M.2 mode (NVMe/SATA) is correctly configured if applicable.
• డీబగ్ హెడర్: The motherboard includes a "Debug Header". While specific codes are not provided, this header is typically used for diagnostic POST (Power-On Self-Test) codes, which can help identify issues during startup. Consult advanced troubleshooting guides or JINGSHA support for interpreting these codes if available.

7 వినియోగదారు చిట్కాలు

• బ్యాటరీ తొలగింపు: Please note that the CMOS battery (CR2032) on the motherboard may be removed before shipping due to international shipping regulations. You will need to install a new CR2032 battery upon receiving the motherboard to retain BIOS settings and system time.
• డ్రైవర్ ఇన్‌స్టాలేషన్: After installing your operating system, ensure you install the latest chipset, graphics (for Intel HD Graphics 4400), and LAN drivers for optimal performance and stability. These can usually be found on the JINGSHA support website or Intel's webసైట్.
• కాంపోనెంట్ అనుకూలత: While this kit provides a tested combination, if you plan to upgrade components (e.g., CPU, RAM, M.2 SSD), always verify compatibility with the H81 chipset and LGA 1150 socket.
• విద్యుత్ సరఫరా: Ensure your power supply unit (PSU) has sufficient wattage and the necessary 8-pin 12V CPU and 24-pin ATX connectors for stable operation.

8. వారంటీ మరియు మద్దతు

The Intel Core i3 4150 CPU included in this kit comes with a 1-year warranty from the date of purchase. For any issues related to the motherboard or other components, please contact the seller or JINGSHA customer support for assistance. Keep your proof of purchase for warranty claims.

JINGSHA and SZMZ are sub-brands of the same company.