TWOTREES TTS-55 PRO Diode Laser Engraver Instruction Manual

1. పరిచయం

The TWOTREES TTS-55 PRO is a versatile and portable diode laser engraving and cutting machine designed for DIY enthusiasts and professionals. It features advanced laser technology for high-precision engraving and efficient cutting on a variety of materials, including wood, stainless steel, ceramic, and dark stone. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to help you get the most out of your device.

2. భద్రతా సమాచారం

Operating a laser engraver involves potential hazards. Please read and understand all safety warnings before use.

• కంటి రక్షణ: Always wear appropriate laser safety goggles (Class IV laser) to protect your eyes from direct or reflected laser radiation.
• స్కిన్ ఎక్స్పోజర్: Avoid direct skin exposure to the laser beam.
• వెంటిలేషన్: Operate the machine in a well-ventilated area to disperse fumes and smoke produced during engraving and cutting.
• మెటీరియల్ భద్రత: Ensure the materials you are processing are safe for laser engraving/cutting and do not produce toxic fumes or flammable byproducts.
• పిల్లలు మరియు పెంపుడు జంతువులు: పరికరాన్ని పిల్లలు మరియు పెంపుడు జంతువులకు దూరంగా ఉంచండి.
• అత్యసవర నిలుపుదల: Familiarize yourself with the location and operation of the power switch for emergency shutdowns.
• మండే పదార్థాలు: మండే ద్రవాలు లేదా వాయువుల దగ్గర పనిచేయవద్దు.

3. ప్యాకేజీ విషయాలు

The TWOTREES TTS-55 PRO laser engraver is designed with modularity, allowing for independent replacement or exchange of components. The package typically includes the following main components:

• Laser Engraver Frame (disassembled components: X-axis, Y-axis, base)
• Laser Module (5.5W Diode Laser)
• Control Box (with 32-bit Motherboard)
• Power Adapter (12V 4A DC)
• USB కేబుల్
• లేజర్ భద్రతా గాగుల్స్
• అసెంబ్లీ సాధనాలు మరియు ఫాస్టెనర్లు
• Sample Materials (e.g., wood, metal plate)
• వినియోగదారు మాన్యువల్ (ఈ పత్రం)

4. స్పెసిఫికేషన్లు

5. సెటప్ గైడ్

5.1. అసెంబ్లీ

The TTS-55 PRO is designed for easy assembly. Follow the included quick start guide or visual instructions to connect the frame components (X-axis, Y-axis, and base) and mount the laser module. Ensure all screws are tightened securely.

5.2. Connecting to Power and Computer/Device

• Connect the power adapter to the machine and a suitable power outlet.
• For PC connection, use the provided USB cable to connect the engraver to your computer.
• For Wi-Fi operation, ensure your device (computer or smartphone) is connected to the same network as the engraver.

5.3. Laser Head Adjustment

Proper focusing of the laser head is crucial for optimal engraving and cutting results. The TTS-55 PRO features a spiral button for convenient height adjustment and a multi-scale positioning column for precise placement.

1. Place your material on the engraving bed.
2. Loosen the thumb screw on the laser head bracket.
3. Adjust the laser head height using the spiral button until the laser's focal point is correctly set on the material surface (typically a small, sharp dot).
4. Tighten the thumb screw to secure the laser head in position.

6. ఆపరేటింగ్ సూచనలు

6.1. సాఫ్ట్‌వేర్ ఇన్‌స్టాలేషన్ మరియు కనెక్షన్

The TTS-55 PRO is compatible with various software options:

• LaserGRBL: Free software for Windows. Download and install from the official webసైట్.
• లైట్‌బర్న్: Paid software for Windows and Mac. Offers advanced features.
• MKSLaser App: Mobile application for Android and iOS devices, available on app stores.

After installing your preferred software, follow its instructions to connect to the engraver via USB or Wi-Fi.

6.2. చెక్కడం మరియు కత్తిరించే ప్రక్రియ

1. Design Preparation: Create or import your design in a supported graphic format (AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT).
2. మెటీరియల్ ప్లేస్‌మెంట్: Place the material securely within the engraving area (300x300mm, extensible). Use the square measuring ruler for precise positioning.
3. ఫోకస్ సర్దుబాటు: Adjust the laser head's height as described in Section 5.3 to achieve optimal focus.
4. సాఫ్ట్‌వేర్ సెట్టింగ్‌లు: Configure engraving/cutting parameters (speed, power, passes) in your chosen software based on the material type and desired outcome.
5. ఆపరేషన్ ప్రారంభించండి: Initiate the engraving or cutting process from the software or via the machine's push button. Monitor the process closely.

6.3. Supported Materials

The TTS-55 PRO can engrave and cut a wide range of materials:

• చెక్కడం: Wood, Aluminum Oxide, 304 Stainless Steel, Ceramic, Dark Stone, Leather, Paper, Acrylic, etc.
• కట్టింగ్: Wood (up to 8mm thick), Paper, Leather, some Acrylics.
• గమనిక: For engraving on glass, laser colored paper is needed to aid the process.

7. నిర్వహణ

క్రమం తప్పకుండా నిర్వహణ మీ లేజర్ చెక్కే వ్యక్తి యొక్క దీర్ఘాయువు మరియు సరైన పనితీరును నిర్ధారిస్తుంది.

• శుభ్రపరచడం: Regularly clean the machine, especially the laser lens, to prevent dust and debris buildup. Use a soft, lint-free cloth and appropriate lens cleaning solution.
• బెల్ట్ టెన్షన్: Check the tension of the drive belts periodically. They should be taut but not overly tight. Adjust if necessary.
• సరళత: Apply a small amount of lubricant to the guide rails and moving parts as recommended by the manufacturer (refer to specific instructions if provided with the machine).
• ఫర్మ్‌వేర్ నవీకరణలు: Check the TWOTREES official webమీ మెషీన్ తాజా ఫీచర్లు మరియు బగ్ పరిష్కారాలను కలిగి ఉందని నిర్ధారించుకోవడానికి అందుబాటులో ఉన్న ఏవైనా ఫర్మ్‌వేర్ నవీకరణల కోసం సైట్‌ను సందర్శించండి.

8. ట్రబుల్షూటింగ్

If you encounter issues with your TTS-55 PRO, refer to the following common troubleshooting steps:

• మెషిన్ ఆన్ చేయడం లేదు: Ensure the power adapter is securely connected to both the machine and a working power outlet. Check the power switch on the control box.
• లేజర్ కాల్చడం లేదు/బలహీనమైన అవుట్‌పుట్: Verify the laser module is correctly installed and connected. Check software settings for laser power. Ensure the laser lens is clean and free of debris.
• పేలవమైన చెక్కడం/కటింగ్ నాణ్యత: Re-check laser focus (Section 5.3). Adjust engraving/cutting speed and power settings in the software. Ensure the material is flat and securely placed.
• Connection Issues (USB/Wi-Fi): For USB, try a different port or cable. For Wi-Fi, ensure the machine and your device are on the same network and the Wi-Fi module is enabled. Restart both the machine and your device.
• స్పందించని నియంత్రణలు: Restart the machine and the software. Check for any error messages in the software.

If the problem persists, contact TWOTREES customer support for further assistance.

9 వినియోగదారు చిట్కాలు

Based on user experiences, here are some tips to enhance your laser engraving and cutting projects:

• పరీక్ష సెట్టింగ్‌లు: Always perform small test engravings on scrap material to find the optimal power and speed settings for new materials or complex designs.
• వెంటిలేషన్ కీలకం: Even with built-in air cooling, good room ventilation is essential to avoid inhaling fumes and to maintain a clean working environment.
• మెటీరియల్ తయారీ: For cutting, ensure the material is perfectly flat to maintain consistent focus across the entire cutting area.
• Software Exploration: Take time to explore the features of LaserGRBL or LightBurn. Many tutorials are available online to help you master advanced techniques.
• శుభ్రంగా ఉంచండి: A clean machine, especially the laser lens and rails, will significantly improve performance and extend the lifespan of your engraver.

10. వారంటీ మరియు మద్దతు

The TWOTREES TTS-55 PRO comes with a 1-year warranty. For technical support, warranty claims, or any questions not covered in this manual, please contact TWOTREES customer service through their official webమీరు ఉత్పత్తిని కొనుగోలు చేసిన సైట్ లేదా రిటైలర్.

Please have your model number (TTS-55 PRO) and purchase details ready when contacting support.