Bogen C100

బోగెన్ C100 క్లాసిక్ 100-వాట్ Ampజీవితకాల వినియోగదారు మాన్యువల్

మోడల్: సి 100

1. పరిచయం

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Bogen C100 Classic 100-Watt Amplifier. Please read this manual thoroughly before operating the unit to ensure proper usage and to maximize its performance and longevity.

బోగెన్ C100 క్లాసిక్ 100-వాట్ Ampలిఫైయర్ ముందు భాగం view

చిత్రం 1.1: ముందు view of the Bogen C100 Classic 100-Watt Amplifier, showing input controls, tone controls, power switch, and Bogen branding.

2. ముఖ్యమైన భద్రతా సమాచారం

Observe all warnings on the product and in the operating instructions. Retain these instructions for future reference.

3. సెటప్ మరియు ఇన్‌స్టాలేషన్

3.1 అన్‌ప్యాకింగ్

జాగ్రత్తగా తొలగించండి amplifier from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Report any damage to your dealer immediately.

3.2 ప్లేస్‌మెంట్

ఉంచండి amplifier on a stable, flat surface. Ensure there is sufficient space around the unit for proper airflow to prevent overheating. The unit is designed for surface mounting.

3.3 కనెక్షన్లు

ఏదైనా కనెక్షన్లు చేసే ముందు, నిర్ధారించుకోండి amplifier is powered off and unplugged from the electrical outlet.

4. ఆపరేటింగ్ సూచనలు

4.1 పవర్ చేయడం ఆన్/ఆఫ్

Locate the red power switch on the front panel. Press the switch to the 'ON' position to power on the amplifier. The switch will illuminate when the unit is powered on. Press it again to power off.

4.2 Adjusting Input Levels

The front panel features individual input level controls. Rotate these knobs clockwise to increase the volume for the corresponding input, and counter-clockwise to decrease it. Adjust these controls to achieve a balanced sound level from all connected sources.

4.3 టోన్ నియంత్రణలు

ది amplifier includes BASS and TREBLE tone controls. Adjust these to fine-tune the audio output to your preference or room acoustics.

4.4 మాస్టర్ వాల్యూమ్

The master volume control adjusts the overall output level of the amplifier. Start with the master volume at a low setting and gradually increase it to the desired listening level. Avoid setting the volume too high, which can cause distortion or damage to speakers.

5. నిర్వహణ

5.1 శుభ్రపరచడం

శుభ్రం చేయడానికి amplifier, first unplug it from the power outlet. Use a soft, dry cloth to wipe down the exterior surfaces. Do not use liquid cleaners or aerosol sprays, as these can damage the finish or internal components.

5.2 వెంటిలేషన్

Regularly check that the ventilation slots on the top and sides of the unit are free from dust and obstructions. Blocked vents can lead to overheating and reduced performance.

5.3 నిల్వ

నిల్వ చేస్తే amplifier for an extended period, ensure it is powered off, unplugged, and stored in a cool, dry place away from direct sunlight and extreme temperatures.

6. ట్రబుల్షూటింగ్

If you experience issues with your Bogen C100 ampలైఫైయర్, సాంకేతిక మద్దతును సంప్రదించే ముందు కింది పట్టికను సంప్రదించండి.

సమస్యసాధ్యమైన కారణంపరిష్కారం
శక్తి లేదుPower cord unplugged; Power outlet not active; Blown fuseEnsure power cord is securely plugged in; Test outlet with another device; Check and replace fuse if necessary (refer to service manual or qualified technician).
సౌండ్ అవుట్‌పుట్ లేదుInput source not connected; Speaker wires loose or incorrect polarity; Input/Master volume too low; Mute function active (if applicable)Verify input source connections; Check all speaker wire connections and polarity; Increase input and master volume levels; Ensure no mute function is engaged.
వక్రీకరించిన ధ్వనిInput level too high; Master volume too high; Incorrect speaker impedance; Damaged speakerReduce input level or master volume; Ensure speakers match amplifier impedance requirements; Test with different speakers if possible.
Unit overheats and shuts downBlocked ventilation; Excessive load on ampజీవితకాలంEnsure ventilation slots are clear; Reduce output volume or number of connected speakers. If problem persists, contact service.

7. స్పెసిఫికేషన్లు

8. వారంటీ మరియు మద్దతు

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Bogen website. The buybox winner mentions a "1 year vendor warranty against defect."

For additional assistance, you may contact Bogen customer service directly. Contact details are typically available on the manufacturer's webసైట్.

సంబంధిత పత్రాలు - C100

ముందుగాview బోగెన్ NQ-GA20P2 నైక్విస్ట్ ఇంటిగ్రేటెడ్ పవర్ Ampలైఫైయర్ కాన్ఫిగరేషన్ మాన్యువల్
బోగెన్ NQ-GA20P2 నైక్విస్ట్ 20-వాట్ ఇంటిగ్రేటెడ్ పవర్ కోసం కాన్ఫిగరేషన్ గైడ్ ampలైఫైయర్, సెటప్, నెట్‌వర్క్ సెట్టింగ్‌లు, ఫర్మ్‌వేర్ అప్‌డేట్‌లు మరియు DSP పారామీటర్ సర్దుబాట్‌లను కవర్ చేస్తుంది.
ముందుగాview బోగెన్ SP158A, SPT15A, SP308A, SPT30A హార్న్ లౌడ్ స్పీకర్ల ఇన్‌స్టాలేషన్ మరియు స్పెసిఫికేషన్లు
బోగెన్ SP158A, SPT15A, SP308A, మరియు SPT30A హార్న్ లౌడ్ స్పీకర్ల కోసం ఇన్‌స్టాలేషన్ సూచనలు, సాంకేతిక వివరణలు మరియు పరిమిత వారంటీ సమాచారం.
ముందుగాview బోగెన్ CC4041 CC సిరీస్ Ampలైఫైయర్ ఇన్‌స్టాలేషన్ మరియు వినియోగ మాన్యువల్
బోగెన్ CC4041 CC సిరీస్ కోసం ఇన్‌స్టాలేషన్ మరియు వినియోగ మాన్యువల్ Ampలైఫైయర్, దాని లక్షణాలు, కనెక్షన్లు, ఆపరేషన్, భద్రతా సూచనలు మరియు సాంకేతిక వివరణలను వివరిస్తుంది.
ముందుగాview బోగెన్ BPA60 పవర్ Ampలైఫైయర్ ఇన్‌స్టాలేషన్ & యూజ్ మాన్యువల్
బోగెన్ BPA60 60-వాట్ మోనో-ఛానల్ పవర్ కోసం సమగ్ర సంస్థాపన మరియు వినియోగ గైడ్ ampలైఫైయర్, సాంకేతిక వివరణలు, భద్రతా జాగ్రత్తలు, కనెక్షన్ రేఖాచిత్రాలు, ఆపరేషన్ సూచనలు మరియు వారంటీ సమాచారాన్ని వివరిస్తుంది.
ముందుగాview బోగెన్ ప్లాటినం సిరీస్ PS120-G2, PS240-G2 పబ్లిక్ చిరునామా Ampలైఫైయర్ ఇన్‌స్టాలేషన్ మరియు యూజ్ గైడ్
బోగెన్ ప్లాటినం సిరీస్ పబ్లిక్ అడ్రస్ కోసం సమగ్ర సంస్థాపన మరియు వినియోగ గైడ్ Ampలైఫైయర్లు, మోడల్స్ PS120-G2 మరియు PS240-G2. ప్రొఫెషనల్ ఆడియో ఇన్‌స్టాలేషన్‌ల కోసం ఫీచర్‌లు, ఆపరేషన్, భద్రత, ట్రబుల్షూటింగ్ మరియు సాంకేతిక వివరణలను కవర్ చేస్తుంది.
ముందుగాview బోగెన్ NQ-E7010 నైక్విస్ట్ ఇన్‌పుట్/అవుట్‌పుట్ కంట్రోలర్ కాన్ఫిగరేషన్ గైడ్
ఈ గైడ్ బోగెన్ NQ-E7010 నైక్విస్ట్ ఇన్‌పుట్/అవుట్‌పుట్ కంట్రోలర్‌ను కాన్ఫిగర్ చేయడానికి సమగ్ర సూచనలను అందిస్తుంది. బోగెన్ డిజిటల్ సర్టిఫికేషన్ అథారిటీతో నెట్‌వర్క్ సెట్టింగ్‌లను నిర్వహించడం, ఫర్మ్‌వేర్‌ను నవీకరించడం, లాగ్‌లను యాక్సెస్ చేయడం మరియు సురక్షితమైన యాక్సెస్‌ను నిర్ధారించడం నేర్చుకోండి.