1. పరిచయం
This manual provides essential information for the safe and effective use of your wolfcraft 2144000 Mounted Stone Set. Please read these instructions carefully before operation and retain them for future reference.
ఉత్పత్తి ముగిసిందిview
The wolfcraft Mounted Stone Set is designed for grinding and finishing various materials, including metals, glass, ceramics, and plastics. The set includes five mounted stones of different shapes and one dressing stone for maintaining the abrasive surfaces.
Figure 1: The wolfcraft 2144000 Mounted Stone Set, featuring five distinct grinding stone shapes and a dressing stone.
చేర్చబడిన భాగాలు
- 5 x Mounted Grinding Stones (various shapes)
- 1 x Dressing Stone
2. భద్రతా సూచనలు
Always observe the following safety precautions to prevent injury and damage to the product.
- వ్యక్తిగత రక్షణ పరికరాలు (PPE) ధరించండి: Always wear safety glasses, hearing protection, and gloves when operating rotary tools with mounted stones.
- Check RPM Limits: Ensure the RPM of your rotary tool does not exceed the maximum RPM specified for the mounted stones (max. 23,000 RPM).
- సురక్షిత వర్క్పీస్: ఆపరేషన్ సమయంలో కదలికను నిరోధించడానికి వర్క్పీస్ను ఎల్లప్పుడూ గట్టిగా భద్రపరచండి.
- Inspect Stones: Before each use, inspect the mounted stones for any damage, cracks, or excessive wear. Do not use damaged stones.
- సరైన మౌంటు: Ensure the mounted stone is securely fastened in the chuck of your rotary tool.
- వెంటిలేషన్: Work in a well-ventilated area to avoid inhaling dust particles.
- వేడెక్కడం నివారించండి: Do not apply excessive pressure, which can cause the stone or workpiece to overheat.
- స్పష్టంగా ఉంచండి: చేతులు మరియు వదులుగా ఉండే దుస్తులను తిరిగే భాగాలకు దూరంగా ఉంచండి.
Figure 2: Safety symbols indicating the necessity of eye protection, hearing protection, and gloves during operation. Also shown are maximum RPM and individual stone dimensions.
3. సెటప్
Follow these steps to properly set up the mounted stones for use.
- Select the Appropriate Stone: Choose the mounted stone with the shape and grit suitable for your specific application and material.
- Insert into Rotary Tool: Loosen the chuck of your rotary tool (e.g., drill, die grinder). Insert the shaft of the mounted stone into the chuck, ensuring it is seated deeply and securely.
- చక్ బిగించండి: Firmly tighten the chuck to prevent the stone from slipping during operation. Verify that the stone is centered and runs true.
- Verify RPM: Confirm that your rotary tool's speed setting does not exceed the maximum recommended RPM of 23,000 for these stones.
4. ఆపరేటింగ్ సూచనలు
Use the mounted stones for grinding, deburring, and shaping various materials.
సాధారణ వినియోగం
- మెటీరియల్ అనుకూలత: Suitable for metals, glass, ceramics, and plastic materials.
- అప్లికేషన్: Apply light, consistent pressure. Allow the stone to do the work. Excessive pressure can lead to premature wear, overheating, and potential damage to the stone or workpiece.
- ఉద్యమం: Move the stone continuously across the workpiece to ensure even material removal and prevent grooving.
చిత్రం 3: ఉదాample of a mounted stone in use, smoothing a circular opening in a workpiece, demonstrating its application for precise shaping.
Figure 4: A conical mounted stone deburring the interior edge of a metal pipe, illustrating its effectiveness for internal grinding and edge finishing.
5. నిర్వహణ
Using the Dressing Stone
Over time, grinding stones can become clogged with material or develop an uneven surface, reducing their effectiveness. The included dressing stone is used to clean and reshape the grinding stones.
- Mount the Grinding Stone: Secure the grinding stone you wish to dress in your rotary tool.
- Activate Rotary Tool: Turn on the rotary tool at a moderate speed.
- Dress the Stone: Gently press the rotating grinding stone against the dressing stone. Move the grinding stone across the surface of the dressing stone to remove clogged material and expose fresh abrasive particles. This also helps to restore the original shape of the stone.
- తనిఖీ: After dressing, inspect the grinding stone to ensure it is clean and has a renewed abrasive surface.
నిల్వ
Store the mounted stone set in a dry place, away from moisture and direct sunlight, to prevent degradation of the abrasive material.
6. ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| పేలవమైన గ్రౌండింగ్ పనితీరు | Stone is clogged or worn out. | Use the dressing stone to clean and reshape. Replace if severely worn. |
| విపరీతమైన కంపనం | Stone not securely mounted or damaged. | Ensure stone is tightly secured in the chuck. Inspect for damage and replace if necessary. |
| Overheating of workpiece/stone | Excessive pressure or incorrect RPM. | Reduce pressure. Verify RPM is within recommended limits. Allow cooling periods. |
7. స్పెసిఫికేషన్లు
| ఫీచర్ | వివరాలు |
|---|---|
| మోడల్ సంఖ్య | 2144000 |
| మెటీరియల్ | అల్యూమినియం ఆక్సైడ్ |
| గ్రిట్ రకం | Medium (Grit Number: 120) |
| ముక్కల సంఖ్య | 6 (5 mounted stones, 1 dressing stone) |
| గరిష్ట RPM | 23,000 RPM |
| అనుకూల పరికరాలు | Rotary tools (e.g., drills, die grinders) |
| వస్తువు బరువు | 0.352 ఔన్సులు (సుమారు 10గ్రా) |
| ఉత్పత్తి కొలతలు (సుమారుగా) | 0.24"L x 0.24"W (individual stone dimensions vary) |
| యుపిసి/జిటిఐఎన్ | 04006885214408 |
8. వారంటీ మరియు మద్దతు
wolfcraft products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the official wolfcraft webసైట్ లేదా కస్టమర్ సపోర్ట్ని సంప్రదించండి.
సంప్రదింపు సమాచారం
వోల్ఫ్క్రాఫ్ట్ GmbH
వోల్ఫ్స్ట్రాస్ 1
59746 కెంపెనిచ్
జర్మనీ
ఇమెయిల్: info@wolfcraft.com
Webసైట్: www.wolfcraft.com
Figure 5: wolfcraft's commitment to European manufacturing and recognition as a major German brand.
