పరిచయం
The Radial BigShot ABY is a true passive switcher designed to manage a two-amplifier setup for guitar or bass. This pedal allows users to select between two amplifiers or operate both simultaneously, addressing common issues such as ground loops and phase discrepancies. Its passive, true-bypass design ensures signal integrity, making it a reliable tool for musicians.
కీ ఫీచర్లు
- Allows switching between two guitar or bass amplifiers (A/B mode).
- Enables simultaneous operation of both amplifiers (Y mode).
- Integrated ground lift on Output B to eliminate hum caused by ground loops.
- 180-degree polarity reverse switch on Output B to correct phase issues between ampజీవితకారులు.
- Selectable isolation transformer on Output B for further noise reduction.
- Passive, true-bypass circuit design preserves the instrument's original tone.
- Constructed with durable 14-gauge steel for robust performance.
నియంత్రణలు మరియు కనెక్షన్లు
ఫ్రంట్ ప్యానెల్ ఓవర్view
చిత్రం: ముందు భాగం view of the Radial BigShot ABY pedal, showing the footswitches, indicator LEDs, and mini-switches for Output B.
- TOGGLE Footswitch: Switches between Output A and Output B. The corresponding LED (A or B) will illuminate to indicate the active output.
- BOTH Footswitch: Activates both Output A and Output B simultaneously. Both A and B LEDs will illuminate when engaged.
- A LED (Green): Indicates that Output A is active.
- B LED (Red): Indicates that Output B is active.
- GND LIFT Switch (Output B): Lifts the ground connection for Output B to eliminate hum and buzz caused by ground loops.
- 180 POL Switch (Output B): Reverses the phase of the signal on Output B by 180 degrees. This is used to correct phase cancellations when running two ampజీవితకారులు.
- ISO Switch (Output B): Engages an isolation transformer for Output B, providing electrical isolation to further reduce noise and hum.
వెనుక ప్యానెల్ ఓవర్view
చిత్రం: వెనుక view of the Radial BigShot ABY pedal, showing the input, output, tuner, and power connections.
- ఇన్పుట్ జాక్: Connect your instrument (guitar, bass, etc.) or the output of your pedalboard here.
- TUNER Jack: A dedicated output for connecting a tuner. This output is always active and does not affect the main signal path.
- OUT-A Jack: Connect this output to the input of your first ampజీవితకాలం.
- OUT-B Jack: Connect this output to the input of your second ampజీవితకాలం.
- 9VDC పవర్ ఇన్పుట్: Connect a standard 9VDC power supply (center-negative) to power the indicator LEDs. The pedal functions passively without power, but LEDs will not illuminate.
సెటప్ గైడ్
- విద్యుత్ కనెక్షన్ (ఐచ్ఛికం): Connect a 9VDC power supply to the 9VDC input jack. This is only required for the LED indicators to function. The audio signal path is passive and does not require power.
- పరికర కనెక్షన్: Connect your instrument or the output of your pedalboard to the BigShot ABY's ఇన్పుట్ జాక్ను ప్రామాణిక 1/4-అంగుళాల ఇన్స్ట్రుమెంట్ కేబుల్ ఉపయోగించి బిగించండి.
- Amplifier Connections:
- కనెక్ట్ చేయండి అవుట్-ఎ jack to the input of your first ampజీవితకాలం.
- కనెక్ట్ చేయండి అవుట్-బి jack to the input of your second ampజీవితకాలం.
- Tuner Connection (Optional): If desired, connect your tuner to the ట్యూనర్ output jack. This output is buffered and always active.
- ప్రారంభ సెట్టింగ్లు: అన్నీ నిర్ధారించుకోండి amplifiers are powered off before making connections. Once connected, power on your ampజీవితకారులు.
ఆపరేటింగ్ సూచనలు
మధ్య మారుతోంది Amplifiers (A/B Mode)
To switch between your two connected amplifiers, press the టోగుల్ footswitch. Each press will alternate the active output between OUT-A and OUT-B. The corresponding green (A) or red (B) LED will illuminate to indicate which amplifier is currently active.
Using Both Amplifiers Simultaneously (Y Mode)
To send your instrument's signal to both amplifiers at the same time, press the రెండూ footswitch. Both the green (A) and red (B) LEDs will illuminate, indicating that both outputs are active.
Addressing Noise and Phase Issues (Output B Controls)
- Ground Lift (GND LIFT): If you experience a hum or buzz when both amplifiers are connected, especially when using the 'BOTH' mode, engage the GND లిఫ్ట్ switch for Output B. This can break ground loops that cause unwanted noise.
- Phase Reversal (180 POL): రెండు ఉపయోగించినప్పుడు amplifiers simultaneously, you may encounter a thin or hollow sound due to phase cancellation. Engage the 180 POL switch for Output B to reverse its phase. Listen for a fuller, more robust sound, indicating correct phase alignment.
- Isolation Transformer (ISO): For persistent noise issues, particularly when using two amplifiers with different electrical characteristics, engage the ISO switch for Output B. This activates an internal isolation transformer to electrically separate Output B from the rest of the circuit, further reducing noise.
Experiment with the GND LIFT, 180 POL, and ISO switches on Output B to achieve the cleanest and most harmonically rich sound when using both ampజీవితకారులు.
ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| ఒక నుండి ధ్వని లేదు ampజీవితకాలం. | Incorrect output selected; cable issue; ampజీవితకాలం ఆఫ్. | Ensure the correct output (A or B) is selected via the TOGGLE switch, or both are active via the BOTH switch. Check all cable connections. Verify amplifier power and settings. |
| Hum or buzz when using two ampజీవితకారులు. | Ground loop between ampజీవితకారులు. | పాల్గొనండి GND లిఫ్ట్ switch on Output B. If hum persists, try engaging the ISO switch on Output B. Ensure all equipment is plugged into properly grounded outlets. |
| Thin or hollow sound when both amplifiers are active. | Phase cancellation between ampజీవితకారులు. | పాల్గొనండి 180 POL switch on Output B to reverse its phase. Listen for a fuller sound. |
| LED లు వెలగడం లేదు. | No 9VDC power connected or faulty power supply. | Connect a standard 9VDC (center-negative) power supply. Verify the power supply is functional. Note that the pedal functions passively without power, only the LEDs require it. |
స్పెసిఫికేషన్లు
- మోడల్: బిగ్షాట్ ABY
- సర్క్యూట్ రకం: Passive, True-Bypass
- ఇన్పుట్: 1/4-inch instrument jack
- అవుట్పుట్లు: 2 x 1/4-అంగుళాలు amplifier outputs (OUT-A, OUT-B), 1 x 1/4-inch Tuner output
- Controls (Output B): Ground Lift, 180° Polarity Reverse, Isolation Transformer
- శక్తి అవసరం: 9VDC (center-negative) for LED indicators only (power supply not included)
- నిర్మాణం: 14-gauge steel chassis
- వస్తువు బరువు: 1.4 పౌండ్లు (0.64 కిలోలు)
- ఉత్పత్తి కొలతలు: 6.4 x 4.1 x 3 అంగుళాలు (16.26 x 10.41 x 7.62 సెం.మీ.)
- సిగ్నల్ ఫార్మాట్: అనలాగ్
- హార్డ్వేర్ ఇంటర్ఫేస్: 1/4-అంగుళాల ఆడియో
భద్రతా సమాచారం
- Always ensure all audio equipment is powered off before making or changing connections to prevent damage to speakers, amplifiers, or the BigShot ABY.
- Use only a regulated 9VDC center-negative power supply for the LED indicators. Using an incorrect power supply may damage the unit.
- యూనిట్ను తేమ లేదా తీవ్రమైన ఉష్ణోగ్రతలకు గురిచేయవద్దు.
- యూనిట్ను పడవేయడం లేదా తీవ్రమైన ప్రభావాలకు గురిచేయడం మానుకోండి.
- అన్ని సేవలను అర్హత కలిగిన సేవా సిబ్బందికి సూచించండి.
వారంటీ మరియు మద్దతు
For warranty information, technical support, or service inquiries, please refer to the official Radial Engineering webసైట్లో లేదా మీ అధీకృత డీలర్ను సంప్రదించండి. కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదును ఉంచండి.
