Lutron Diva DVSCELV-300P-BI Electronic Low-Voltagఇ డిమ్మర్ ఇన్‌స్ట్రక్షన్ మాన్యువల్

1. ఉత్పత్తి ముగిసిందిview

The Lutron Diva DVSCELV-300P-BI is a 300-watt single pole electronic low-voltage dimmer designed to control lighting from one location. It features a large paddle switch for on/off control and a linear slider for precise dimming adjustments. This dimmer is specifically for use with electronic low-voltage lighting applications. It allows users to adjust light levels, contributing to energy savings and creating desired room atmospheres. Wallplates are sold separately.

2. భద్రతా సమాచారం

• హెచ్చరిక: షాక్ హజార్డ్. May result in serious injury or death. Turn OFF power at the circuit breaker or fuse box before installing.
• అన్ని జాతీయ మరియు స్థానిక ఎలక్ట్రికల్ కోడ్‌లకు అనుగుణంగా ఇన్‌స్టాల్ చేయండి.
• ఈ సూచనలలో ఏదైనా భాగం గురించి మీకు తెలియకపోతే, అర్హత కలిగిన ఎలక్ట్రీషియన్‌ను సంప్రదించండి.
• Do not use with standard incandescent, magnetic low-voltage, or fluorescent lighting. This dimmer is for electronic low-voltagఇ అప్లికేషన్లు మాత్రమే.
• మొత్తం వాట్‌ను నిర్ధారించుకోండిtage of the connected lighting does not exceed 300 watts.

3. ప్యాకేజీ విషయాలు

• Lutron Diva DVSCELV-300P-BI Dimmer
• Wire connectors (various colors, typically yellow and blue)
• ఇన్‌స్టాలేషన్ గైడ్

Note: Wallplate is not included and must be purchased separately.

4. స్పెసిఫికేషన్లు

5. సంస్థాపన

Before beginning installation, ensure you have turned off power at the circuit breaker. This dimmer is designed for single-pole applications where the light is controlled from one switch. A neutral wire connection is typically required for proper operation.

5.1. తయారీ

1. పవర్ ఆఫ్ చేయండి: Locate your circuit breaker panel and turn off the power to the light switch you are replacing.
2. పవర్ ఆఫ్ చేయబడిందని ధృవీకరించండి: Flip the existing switch on and off to confirm the power is disconnected.
3. Remove existing wallplate and switch: Unscrew the wallplate and then the mounting screws holding the old switch in place. Carefully pull the switch out from the wall box.
4. వైర్లను గుర్తించండి: Note the connections of the existing wires. Typically, a single-pole switch will have two load/line wires and a ground wire. Some dimmers may require a neutral wire (usually white).

చిత్రం: ముందు భాగం view of the Lutron Diva DVSCELV-300P-BI Electronic Low-Voltage Dimmer, showing the paddle switch and linear slider.

చిత్రం: వైపు view of the Lutron Diva DVSCELV-300P-BI Dimmer, illustrating the pre-stripped wires for connection.

5.2. Wiring the Dimmer

The Lutron Diva DVSCELV-300P-BI dimmer typically has three wires: a green wire (ground), a black wire (hot/line), and a yellow wire (load). Some models may also include a white wire (neutral).

1. గ్రౌండ్ వైర్: Connect the green wire from the dimmer to the bare copper or green ground wire in the wall box using a wire connector.
2. Hot/Line Wire: Connect the black wire from the dimmer to the incoming hot/line wire from the circuit breaker (often black or red) using a wire connector.
3. లోడ్ వైర్: Connect the yellow wire from the dimmer to the load wire that goes to the light fixture (often black or red) using a wire connector.
4. Neutral Wire (if applicable): If your dimmer has a white wire and your wall box has a neutral wire bundle (usually white wires twisted together), connect the white dimmer wire to the neutral bundle using a wire connector. If no neutral wire is present in the wall box, cap off the white wire from the dimmer with a wire connector.

5.3. Finishing Installation

1. Secure the dimmer: Carefully push all wires back into the wall box. Mount the dimmer to the wall box using the provided screws.
2. Attach wallplate: Install the coordinating wallplate (sold separately) over the dimmer.
3. శక్తిని పునరుద్ధరించండి: Return to your circuit breaker panel and turn the power back on.

Image: The Lutron Diva DVSCELV-300P-BI Dimmer installed in a wall, ready for use.

6. ఆపరేషన్

• లైట్లను ఆన్/ఆఫ్ చేయడం: Press the large paddle switch to turn the connected lights on or off.
• ప్రకాశం సర్దుబాటు: Use the linear slider located next to the paddle switch to adjust the light level. Slide up for brighter lights and down for dimmer lights.
• Preset Dimming: The dimmer will return to the previously set light level when turned back on.

Image: A hand demonstrating the operation of the Lutron Diva DVSCELV-300P-BI Dimmer, highlighting the paddle switch and linear slider.

7. నిర్వహణ

• శుభ్రపరచడం: Clean the dimmer and wallplate with a soft, damp గుడ్డ. రాపిడి క్లీనర్లు లేదా ద్రావకాలు ఉపయోగించవద్దు.
• వినియోగదారు-సేవ చేయదగిన భాగాలు లేవు: There are no user-serviceable parts inside the dimmer. Do not attempt to open or repair the unit.

8. ట్రబుల్షూటింగ్

9. వారంటీ మరియు మద్దతు

For warranty information, technical support, or further assistance, please visit the official Lutron website or contact Lutron customer service. Keep your purchase receipt for warranty claims.

Lutron Support: Lutron.com/support