చాంబర్‌లైన్ క్లిక్కర్ కీలెస్ ఎంట్రీ KLIK2U-P2 యూనివర్సల్ గ్యారేజ్ డోర్ కీప్యాడ్ ఇన్‌స్ట్రక్షన్ మాన్యువల్

పరిచయం

The CHAMBERLAIN Clicker Keyless Entry KLIK2U-P2 provides convenient, secure, and keyless access to your garage or gate. This universal wireless keypad is designed for broad compatibility with most garage door openers manufactured after 1993 that utilize photoelectric sensors.

This manual provides detailed instructions for setting up, operating, and maintaining your KLIK2U-P2 keypad.

ముఖ్యమైన భద్రతా సమాచారం

• Photo-Eye Sensors: The Original Clicker Universal Wireless Keypad by Chamberlain is intended for use with residential door openers manufactured after 1993 that use photoelectric sensors. Any garage door opener that does not have these sensors installed and working should be replaced.
• క్లియరెన్స్: Ensure all children, pets, or items are completely clear of the garage door before proceeding with the programming process or operating the door.
• సంస్థాపన ఎత్తు: Install the keypad out of reach of children, at a minimum height of 5 feet (1.5 meters) or 60 inches above the floor.
• Door Path: Mount the keypad out of the path of the moving garage door, but within sight of it.
• Cover Clearance: 4 inches of clearance is needed for the cover to be able to fully open.

అనుకూలత

The KLIK2U-P2 keypad offers universal frequency recognition, identifying over 90% of all garage door openers installed in North America. It is compatible with major brands and code types, including:

• Billion code 390 MHz
• Security+ 390 MHz
• Security+ 315 MHz
• భద్రత+ 2.0
• Linear MegaCode 318 MHz
• Genie Intellicode 390 MHz and 315MHz
• Stanley SecureCode 310 MHz

Refer to the programming section for specific instructions based on your garage door opener's learn button color or DIP switch type.

Image: Packaging highlighting compatibility with major brands and different learn button types (Orange/Red, Purple, Green, Yellow).

సెటప్ మరియు ప్రోగ్రామింగ్

Setting up your KLIK2U-P2 keypad involves programming a personal identification number (PIN) and syncing it with your garage door opener. The process is wireless and typically takes seconds.

1. Identify Your Garage Door Opener Type

Locate the "Learn" button on your garage door opener. Note its color, as this determines the programming steps. Alternatively, some older openers use DIP switches. Refer to your opener's manual if unsure.

Image: Packaging emphasizing wire-free setup and secure encryption.

2. Program the Keypad

1. Select a 4-digit PIN: Choose a personal 4-digit code.
2. Initiate Programming Mode: Press and hold the '*' and '#' keys together on the keypad until the keypad stops flashing.
3. పిన్ నమోదు చేయండి: Enter your chosen 4-digit PIN, then press '#'.
4. Determine Opener ID: Use the instruction manual provided with your keypad to find the corresponding Opener ID based on your garage door opener's brand and learn button color/DIP switch type. Enter this ID, then press '#'.
5. Sync with Opener: Press and quickly release the "Smart/Learn" button on your garage door opener. The indicator light on the opener will turn ON.
6. Finalize Keypad Sync: Within 30 seconds of the opener's indicator light turning ON, enter your 4-digit PIN on the keypad, then press and hold the '0' key until the garage door opener lights flash or two clicks are heard.

For Genie and Overhead Door units, press the '0' key twice in the final step.

3. కీప్యాడ్ మౌంట్

The keypad comes with a 9V battery pre-installed and mounting hardware.

1. Remove the outer cover by sliding it upwards.
2. Unscrew and remove the battery compartment cover and the 9V battery to expose the mounting holes.
3. Secure the keypad to a smooth surface using the included screws. Ensure it's at least 5 feet (1.5 meters) above the ground and out of the path of the moving door.
4. Reconnect the 9V battery, replace the battery compartment cover, and slide the outer cover back down.

చిత్రం: వెనుక view of the keypad with mounting screw locations and product labels.

Image: Keypad with the protective cover slid open, revealing the numbered buttons.

అధికారిక సెటప్ వీడియో

Video: A detailed guide on how to program the Chamberlain universal garage door opener keypad, including identifying opener type and programming steps.

Operating the Keypad

To operate your garage door using the keypad:

1. Slide the protective cover upwards to reveal the keypad.
2. మీ 4 అంకెల పిన్‌ని నమోదు చేయండి.
3. Press the '0' key. The garage door will activate.
4. Slide the protective cover downwards to protect the keypad from elements.

Video: Demonstration of opening and closing a garage door using the Chamberlain Clicker Keyless Entry keypad.

నిర్వహణ

బ్యాటరీ భర్తీ

The keypad is powered by a 9V battery (included). When the battery is low, the keypad's backlight may dim or the keypad may become unresponsive. To replace the battery:

1. Slide the protective cover upwards.
2. బ్యాటరీ కంపార్ట్మెంట్ కవర్ను విప్పు మరియు తీసివేయండి.
3. Remove the old 9V battery and insert a new one, ensuring correct polarity.
4. బ్యాటరీ కంపార్ట్‌మెంట్ కవర్‌ను మార్చండి మరియు దానిని స్క్రూతో భద్రపరచండి.
5. Slide the protective cover downwards.

వాతావరణ రక్షణ

The sliding cover is designed to protect the keypad from various weather conditions. Ensure the cover is fully closed when not in use to maintain its protective function.

ట్రబుల్షూటింగ్

• కీప్యాడ్ స్పందించడం లేదు: Check the 9V battery. Replace if necessary.
• Opener Does Not Function After Programming:
  • Ensure you correctly identified your opener's learn button color or DIP switch settings.
  • For DIP switch openers, if the opener does not function, try flipping the DIP switches (if a switch was "on" or "up" in step 3 of programming, flip it "off" or "down" and vice versa) and repeat the programming steps.
  • Ensure you are within approximately 2 feet of the garage door opener power head during the syncing step for best results.
  • Repeat the entire programming process carefully.
• కనెక్టివిటీ సమస్యలు: For better connectivity, ensure adequate Wi-Fi signal is present in your garage before setup, if your opener relies on Wi-Fi for smart features (though this keypad is wireless, not Wi-Fi dependent, strong signal can help overall system stability).

స్పెసిఫికేషన్లు

Image: Keypad with overlaid dimensions, indicating a length of 11 inches (28 cm).

వారంటీ

The CHAMBERLAIN Clicker Keyless Entry KLIK2U-P2 comes with a 1-Year Warranty.

మద్దతు

For additional information or assistance, please refer to the instruction manual included with your product. You can also visit the official Chamberlain webతదుపరి మద్దతు మరియు వనరుల కోసం సైట్.

అధికారిక Webసైట్: www.chamberlain.com