DEWALT DW717 10-అంగుళాల డబుల్ బెవెల్ స్లైడింగ్ కాంపౌండ్ మిటెర్ సా ఇన్‌స్ట్రక్షన్ మాన్యువల్

1. పరిచయం

This manual provides essential information for the safe and effective operation, setup, and maintenance of your DEWALT DW717 10-Inch Double Bevel Sliding Compound Miter Saw. This tool is designed for precise crosscutting and miter cutting applications, featuring a powerful 15-amp motor and a versatile double-bevel sliding mechanism. Please read all instructions carefully before use to ensure proper function and safety.

చిత్రం 1: పైగాview of the DEWALT DW717 Miter Saw. This image shows the complete saw assembly, highlighting its robust construction and key components such as the blade guard, motor housing, and miter table.

2. సెటప్ మరియు అసెంబ్లీ

Before operating the saw, ensure it is properly assembled and secured.

2.1 ప్రారంభ నియామకం

Place the miter saw on a stable, level surface. Ensure adequate workspace around the saw for material handling and safe operation. The saw weighs approximately 51 pounds and features a built-in carry handle for portability.

2.2 బ్లేడ్ ఇన్‌స్టాలేషన్/రీప్లేస్‌మెంట్

The saw comes with a 10-inch blade. If replacement is necessary, follow these steps:

1. పవర్ డిస్‌కనెక్ట్ చేయండి: Always unplug the saw from the power source before performing any maintenance or adjustments.
2. Access Blade: Refer to the saw's specific instructions for opening the blade guard and accessing the blade retaining bolt.
3. పాత బ్లేడ్ తొలగించండి: Use the provided tool to loosen and remove the blade retaining bolt. Carefully remove the old blade.
4. కొత్త బ్లేడ్‌ను ఇన్‌స్టాల్ చేయండి: Position the new 10-inch blade, ensuring the teeth are oriented correctly for cutting. Secure it with the retaining bolt, tightening firmly.
5. Close Guard: Ensure all guards are properly closed and secured before reconnecting power.

Note: Some users have reported difficulty with blade removal due to the dust chute design on certain models (Type 2). If encountering resistance, ensure the dust chute is not obstructing the blade's path. Consult the troubleshooting section or a service center if issues persist.

మూర్తి 2: వైపు view of the miter saw, showing the blade and guard assembly. This view helps in understanding the blade replacement process.

3. ఆపరేటింగ్ సూచనలు

The DEWALT DW717 is designed for precise cutting operations. Always wear appropriate safety gear, including eye protection, hearing protection, and gloves.

3.1 పవర్ ఆన్ మరియు ఆఫ్

• Connect the saw to a standard AC power outlet.
• రంపాన్ని ప్రారంభించడానికి, ట్రిగ్గర్ స్విచ్‌ను నొక్కండి.
• To stop the saw, release the trigger switch. Allow the blade to come to a complete stop before moving material or making adjustments.

3.2 Miter Angle Adjustments

The saw features an adjustable stainless steel miter detent plate with 11 positive stops for common angles.

1. Loosen the cam-lock miter handle.
2. Rotate the miter table to the desired angle. Positive stops will engage at common angles.
3. For angles between detents, use the detent override feature.
4. Tighten the cam-lock miter handle to secure the setting.

The miter capacity ranges from 0 to 60 degrees to the left and 0 to 52 degrees to the right.

మూర్తి 3: ముందు view of the miter saw, illustrating the miter scale and cam-lock handle for angle adjustments.

3.3 Bevel Angle Adjustments

The saw allows for double-bevel cuts, ranging from 0 to 48 degrees to both the left and right.

1. Locate the bevel lock lever.
2. Loosen the lever and tilt the saw head to the desired bevel angle.
3. Secure the bevel lock lever firmly.

This double-bevel capability increases versatility, allowing you to make opposing bevel cuts without flipping the workpiece.

3.4 Sliding Function

The dual horizontal steel rails enable the saw head to slide, increasing crosscut capacity.

• For wider materials, pull the saw head forward, engage the motor, and push the saw head smoothly through the material.
• Ensure the material is firmly against the fence and clampఅవసరమైతే ed.

మూర్తి 4: వైపు view of the miter saw, demonstrating the extended sliding rails for increased crosscut capacity.

3.5 కట్టింగ్ సామర్థ్యం

• Crosscut Capacity: Up to 12 inches at a 45-degree angle using the back-fence design.
• Vertical Cut Capacity (Nested Crown): Up to 6-1/4 inches.
• Base Molding Support: Tall sliding fence supports up to 6-inch base molding to the left of the blade and up to 3-1/2 inches to the right.
• 45-degree Bevel Cuts: Through dimensional lumber up to 2 by 14 inches, thanks to the unique back fence design.

Figure 5: The miter saw in operation, demonstrating its capability to cut through a piece of wood. This image highlights the blade's action and the material support.

4. నిర్వహణ

క్రమం తప్పకుండా నిర్వహణ మీ మిటెర్ రంపపు దీర్ఘాయువు మరియు సరైన పనితీరును నిర్ధారిస్తుంది. ఏదైనా నిర్వహణ చేసే ముందు ఎల్లప్పుడూ విద్యుత్ వనరు నుండి రంపాన్ని డిస్‌కనెక్ట్ చేయండి.

4.1 శుభ్రపరచడం

• Regularly clean sawdust and debris from the saw, especially around the blade, guards, and sliding mechanisms.
• Use a brush or compressed air. Avoid using solvents that could damage plastic components.

4.2 దుమ్ము సేకరణ

The saw includes a dust collection bag. For improved dust extraction, connect a shop vacuum to the dust port.

మూర్తి 6: క్లోజ్-అప్ view of the dust collection port on the DEWALT DW717 miter saw. This port allows for connection to a shop vacuum for enhanced dust management.

4.3 సరళత

సజావుగా పనిచేయడానికి స్లైడింగ్ పట్టాలకు మెషిన్ ఆయిల్ యొక్క తేలికపాటి కోటును కాలానుగుణంగా పూయండి.

5. ట్రబుల్షూటింగ్

This section addresses common issues you might encounter with your DEWALT DW717 miter saw.

5.1 Difficulty Removing Blade

Some users of the DW717 Type 2 model have reported that the dust chute's design can obstruct blade removal.

• Check for Obstruction: Ensure the dust chute is not physically blocking the blade from being removed from the spindle.
• సున్నితమైన ఒత్తిడి: If the dust chute has a lip that interferes, gentle pressure or slight manipulation of the chute (if possible without damage) may be required to create clearance.
• వృత్తిపరమైన సహాయం: If the blade cannot be removed safely, contact a DEWALT service center for assistance. Do not force the blade, as this may cause damage to the saw or injury.

5.2 Inaccurate Cuts

• బ్లేడ్ తనిఖీ చేయండి: Ensure the blade is sharp, clean, and correctly installed. A dull or damaged blade can lead to inaccurate cuts.
• సెట్టింగ్‌లను ధృవీకరించండి: Double-check miter and bevel angle settings. Ensure all locking levers and handles are securely tightened.
• Fence Perpendicularity: The machined-base fence support is designed to maintain fence perpendicularity. If cuts are consistently off, inspect the fence for damage or misalignment.
• మెటీరియల్ సపోర్ట్: Ensure the workpiece is firmly supported against the fence and table, and clamped if necessary, to prevent movement during cutting.

6. స్పెసిఫికేషన్లు

7. వారంటీ మరియు మద్దతు

7.1 వారంటీ సమాచారం

The DEWALT DW717 10-Inch Double Bevel Sliding Compound Miter Saw comes with a comprehensive warranty package:

• మూడు సంవత్సరాల పరిమిత వారంటీ: Covers defects in materials or workmanship for three years from the date of purchase.
• One-Year Free Service Contract: DEWALT టూల్‌ను నిర్వహిస్తుంది మరియు కొనుగోలు చేసిన తర్వాత మొదటి సంవత్సరంలో ఏ సమయంలోనైనా సాధారణ వినియోగం వల్ల అరిగిపోయిన భాగాలను ఉచితంగా భర్తీ చేస్తుంది.
• 90-రోజుల మనీ బ్యాక్ గ్యారెంటీ: ఏదైనా కారణం చేత మీ DEWALT పవర్ టూల్, లేజర్ లేదా నైలర్ పనితీరుతో మీరు పూర్తిగా సంతృప్తి చెందకపోతే, మీరు కొనుగోలు చేసిన తేదీ నుండి 90 రోజుల్లోపు పూర్తి వాపసు కోసం దానిని తిరిగి ఇవ్వవచ్చు.

For full terms and conditions, please refer to the official DEWALT warranty documentation included with your product or visit the DEWALT webసైట్.

7.2 కస్టమర్ మద్దతు

For technical assistance, service, or warranty claims, please contact DEWALT Customer Support.

DEWALT Customer Support Information