పరిచయం
The IDEAL 89-212 Terminal Strip is a robust 12-circuit electrical connector designed for secure and reliable wire termination. It features a rugged base to prevent breakage and corrosion-resistant surface plates with No.8 philslot screws, ensuring long-term durability. This terminal strip is rated for up to 600-Volt and 30A applications, making it suitable for various industrial and home improvement electrical connections.
భద్రతా సమాచారం
Always observe standard electrical safety precautions when working with terminal strips and electrical wiring. Failure to do so may result in serious injury or damage to property.
- Ensure power is disconnected at the source before installation, maintenance, or troubleshooting.
- ఇన్సులేటెడ్ గ్లోవ్స్ మరియు సేఫ్టీ గ్లాసెస్ వంటి తగిన వ్యక్తిగత రక్షణ పరికరాలను (PPE) ఉపయోగించండి.
- వాల్యూమ్ను ధృవీకరించండిtage and current ratings of the terminal strip are compatible with your application. This unit is rated for up to 600 Volts and 30 Amps.
- All wiring should comply with local and national electrical codes.
- Do not exceed the specified torque rating of 16-Inch-Pound for the screws.
- ఈ ఉత్పత్తిలో క్యాన్సర్ మరియు పుట్టుకతో వచ్చే లోపాలు లేదా ఇతర పునరుత్పత్తి హాని కలిగించే రసాయనాలు కాలిఫోర్నియా రాష్ట్రానికి తెలిసినవి కావచ్చు (ప్రతిపాదన 65 హెచ్చరిక).
ఉత్పత్తి ముగిసిందిview
Figure 1: The IDEAL 89-212 Terminal Strip, showing its black housing and screw terminals.
The IDEAL 89-212 is a 12-circuit screw terminal strip designed for efficient and secure electrical connections. Each circuit consists of a metal terminal block with two philslot screws for securing wires, separated by a rugged black plastic housing.
ముఖ్య లక్షణాలు:
- Torque Rating of 16-Inch Pound
- Rugged base eliminates breakage
- Center spacing of 0.562-Inch (14.3mm)
- Accepts up to No.10 AWG wire
- Rated up to 600-Volt, 30A
స్పెసిఫికేషన్లు
| స్పెసిఫికేషన్ | విలువ |
|---|---|
| బ్రాండ్ | ఆదర్శవంతమైనది |
| మోడల్ సంఖ్య | 89-212 |
| ప్రస్తుత రేటింగ్ | 30 Amps |
| వాల్యూమ్tagఇ రేటింగ్ | 600 వోల్ట్లు |
| పరిచయాల సంఖ్య | 12 |
| కనెక్టర్ రకం | స్క్రూ |
| మౌంటు రకం | ఉపరితలం |
| మెటీరియల్ | రాగి (టెర్మినల్స్), ప్లాస్టిక్ (గృహనిర్మాణం) |
| రంగు | నలుపు |
| Item Pitch | 0.56 అంగుళాలు (14.3 మిమీ) |
| Wire Gauge Accepted | Up to No.10 AWG |
| వస్తువు బరువు | 4.8 ఔన్సులు |
| ఉత్పత్తి కొలతలు | 4 x 2 x 1 అంగుళాలు |
| ధృవపత్రాలు | CSA, UL |
సెటప్
Follow these steps for proper installation of the terminal strip:
- పవర్ డిస్కనెక్ట్: Before beginning any installation, ensure that all power to the circuit is completely disconnected at the main breaker or fuse box. Verify with a voltagఇ టెస్టర్.
- మౌంటు: Secure the terminal strip to a stable, non-conductive surface using appropriate fasteners through the mounting holes provided at each end of the strip. Ensure it is firmly attached to prevent movement.
- వైర్ తయారీ: Strip approximately 3/8 to 1/2 inch of insulation from the ends of the wires to be connected. Ensure the wire strands are neatly twisted if using stranded wire.
- వైర్ చొప్పించడం: Loosen the philslot screws on the desired terminal circuits. Insert the prepared wire ends fully into the terminal openings beneath the screws.
- సురక్షిత కనెక్షన్లు: Tighten the philslot screws firmly to secure the wires. Apply a torque of up to 16-Inch-Pound. Do not overtighten, as this can damage the terminal or wire. Ensure no loose strands are exposed.
- ధృవీకరణ: After all connections are made, visually inspect each terminal to confirm wires are securely fastened and there are no exposed conductors that could cause a short circuit.
ఆపరేటింగ్ సూచనలు
Once installed, the IDEAL 89-212 Terminal Strip operates passively as a connection point for electrical circuits. Its primary function is to provide a secure and organized method for connecting multiple wires within a system.
- The terminal strip facilitates the distribution of power or signals from one source to multiple destinations, or vice-versa.
- Ensure that the total current flowing through any single terminal or the entire strip does not exceed its rated capacity (30 Ampలు).
- Accessory jumpers are available for creating common connections across multiple terminals if required for your application.
నిర్వహణ
The IDEAL 89-212 Terminal Strip requires minimal maintenance. Regular inspection is recommended to ensure continued safe and reliable operation.
- ఆవర్తన తనిఖీ: Periodically inspect the terminal strip for any signs of damage, discoloration, or loose connections. This should be done with power disconnected.
- శుభ్రపరచడం: If necessary, gently clean the exterior of the terminal strip with a dry, lint-free cloth. Do not use liquid cleaners or solvents.
- బిగుతు తనిఖీ: Re-check the tightness of the screw terminals annually, especially in environments subject to vibration or significant temperature fluctuations. Ensure power is off before checking.
- పర్యావరణ పరిస్థితులు: Ensure the terminal strip is not exposed to excessive moisture, dust, or corrosive substances beyond its intended operating environment.
ట్రబుల్షూటింగ్
If you encounter issues with your IDEAL 89-212 Terminal Strip, consider the following common troubleshooting steps:
- No Power/Intermittent Connection:
- Check Wire Connections: Ensure all wires are securely fastened under the screws. Loose connections are a common cause of intermittent power.
- Verify Wire Stripping: Confirm that enough insulation was stripped to allow good contact with the terminal, but not so much that bare wire is exposed outside the terminal.
- వైర్లను తనిఖీ చేయండి: Check for damaged or broken wires leading to or from the terminal strip.
- Overheating/Discoloration:
- చెక్ లోడ్: Ensure the current load does not exceed the 30 Amp rating of the terminal strip. Overloading can cause overheating.
- కనెక్షన్లను తనిఖీ చేయండి: Loose connections can create resistance and generate heat. Re-tighten screws if necessary (with power off).
- వైర్ గేజ్: Confirm that the wire gauge used is appropriate for the current load and is not undersized.
- భౌతిక నష్టం:
- If the terminal strip housing is cracked or broken, or if terminals are corroded beyond cleaning, the unit should be replaced immediately to ensure safety and proper function.
If issues persist after troubleshooting, consult a qualified electrician or contact IDEAL customer support.
వారంటీ మరియు మద్దతు
For information regarding warranty coverage, technical support, or replacement parts for your IDEAL 89-212 Terminal Strip, please refer to the official IDEAL Industries webసైట్లో లేదా వారి కస్టమర్ సర్వీస్ విభాగాన్ని నేరుగా సంప్రదించండి. కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదును ఉంచండి.
Note: Specific warranty terms and conditions may vary by region and product.
