అట్లాస్ సౌండ్ M1000 సౌండ్ మాస్కింగ్ స్పీకర్ ఇన్‌స్ట్రక్షన్ మాన్యువల్

పరిచయం

The Atlas Sound M1000 is an 8-inch dual cone sound masking speaker assembly designed for installation in plenum spaces. This unit is engineered to accurately reproduce sound masking signals, contributing to acoustic privacy and comfort in various environments. It features an integrated 70.7V transformer with an external tap selector for precise system tuning and includes innovative installation hardware for simplified setup.

భద్రతా సమాచారం

Always adhere to local electrical codes and safety regulations during installation. Ensure power is disconnected before making any electrical connections. This product is UL 1480 and UL 2043 listed for use in air handling spaces, indicating compliance with safety standards for such environments. Installation should be performed by qualified personnel.

ప్యాకేజీ విషయాలు

The M1000 unit comes pre-assembled and includes the following components:

• 8-inch diameter dual cone loudspeaker
• Integrated 70.7V transformer
• ఎన్ క్లోజర్
• అడ్డంకి
• Mounting hardware (including EZ hang brackets and snap hanger assembly)

The pre-assembled unit includes the 8" dia. loudspeaker, transformer, enclosure, baffle, and mounting hardware. The EZ hang brackets and snap hanger assembly are integrated for ease of installation.

సెటప్ మరియు ఇన్‌స్టాలేషన్

The M1000 speaker is designed for quick and easy installation in plenum spaces, utilizing its integrated EZ hang brackets.

మౌంటు

1. మౌంటు స్థానాన్ని సిద్ధం చేయండి: Identify the desired location in the plenum space. The unit is suitable for use above suspended ceiling systems or in open ceiling spaces.
2. Utilize EZ Hang Brackets: The factory-installed EZ hang brackets are collapsible and can be configured for upward, downward, or side-firing installation. Extend these brackets as needed.
3. యూనిట్‌ను భద్రపరచండి: Use the snap hanger assembly to securely mount the speaker. An optional MCHAIN72 suspension chain system (sold separately) can also be used for quick mounting and height adjustment.

Wiring and Tap Selection

The M1000 features an innovative input panel for electrical connections.

1. Access Input Panel: The input panel includes knockouts and a strain relief connector. Remove the plate to access wiring terminals.
2. వైరింగ్ కనెక్ట్ చేయండి: Connect the 70.7V audio signal wiring to the terminals. The system accommodates rigid or flexible conduit if required. An integral wire strain relief ensures secure cable termination.
3. Select Power Tap: Use the external tap selector switch to choose the desired power setting (0.25W, 0.5W, 1.0W, 2.0W, 4.0W) for the 70.7V system. This allows for precise system tuning to achieve the required sound masking level. Ensure the "OFF" position is selected before making connections.

మూర్తి 1: Atlas Sound M1000 speaker with visible tap selector switch and wiring input. The switch allows selection of power taps from 0.25W to 4.0W for 70.7V systems, or the 'OFF' position.

ఆపరేటింగ్ సూచనలు

The Atlas Sound M1000 is a passive sound masking speaker. Once properly installed and connected to a 70.7V sound masking system, its operation is integrated with the overall system control. The primary operational adjustment is the power tap selection.

• Power Tap Adjustment: The external tap selector switch allows you to set the speaker's output power (0.25W, 0.5W, 1.0W, 2.0W, 4.0W) for 70.7V systems. Adjust this setting to achieve the desired sound masking level in the coverage area.
• సిస్టమ్ ఇంటిగ్రేషన్: The speaker will reproduce the sound masking signal provided by the connected sound masking generator or amplifier. Refer to your sound masking system's manual for overall system operation.

నిర్వహణ

The Atlas Sound M1000 speaker requires minimal maintenance.

• శుభ్రపరచడం: Periodically inspect the speaker and enclosure for dust accumulation. Clean with a soft, dry cloth. Do not use liquid cleaners directly on the speaker components.
• తనిఖీ: Annually inspect wiring connections and mounting hardware to ensure they remain secure.
• పర్యావరణ పరిస్థితులు: Ensure the speaker is operated within its specified environmental conditions. It is designed for plenum spaces.

ట్రబుల్షూటింగ్

If you experience issues with your M1000 sound masking speaker, consider the following:

• సౌండ్ అవుట్‌పుట్ లేదు:
  • Verify that the sound masking system ampలైఫైయర్ ఆన్ చేయబడింది మరియు సరిగ్గా పని చేస్తుంది.
  • నుండి అన్ని వైరింగ్ కనెక్షన్‌లను తనిఖీ చేయండి amplifier to the speaker for continuity and secure termination.
  • Ensure the tap selector switch on the M1000 is not set to "OFF" and is set to a desired wattage (e.g., 0.25W, 0.5W, 1.0W, 2.0W, 4.0W).
  • ఇన్‌పుట్ వాల్యూమ్‌ని నిర్ధారించండిtage 70.7V.
• తక్కువ సౌండ్ అవుట్‌పుట్:
  • Adjust the tap selector switch to a higher wattagఇ సెట్టింగ్.
  • Check the output level of the sound masking system ampజీవితకాలం.
• వక్రీకరించిన ధ్వని:
  • Ensure the input signal from the sound masking system is not overdriving the speaker.
  • Inspect the speaker cone for any physical damage.

If issues persist, contact Atlas Sound technical support.

స్పెసిఫికేషన్లు

మూర్తి 2: Dimensions of the Atlas Sound M1000 speaker, measuring 11.5" D x 11.5" W x 5.5" H.

వారంటీ సమాచారం

The Atlas Sound M1000 speaker comes with a Limited Warranty. For specific terms and conditions, please refer to the official Atlas Sound warranty documentation provided with your purchase or visit the Atlas Sound website. This warranty typically covers defects in materials and workmanship under normal use.

మద్దతు మరియు సంప్రదించండి

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Atlas Sound customer support:

• తయారీదారు: అట్లాస్ సౌండ్
• Webసైట్: www.అట్లాసౌండ్.కామ్
• Refer to your product packaging or the Atlas Sound webఅత్యంత తాజా సంప్రదింపు సమాచారం కోసం సైట్.