Ford Racing CM6731FL82 High Performance Oil Filter User Manual

1. పరిచయం

This manual provides essential information for the proper installation, operation, and maintenance of the Ford Racing CM6731FL82 High Performance Oil Filter. This oil filter is designed to provide superior filtration for engine oil, contributing to engine longevity and performance. It features a heavy gauge base and canister for enhanced strength and resistance to impulse fatigue, and is suitable for use with both standard and synthetic motor oils.

2. భద్రతా సమాచారం

• Always allow the engine to cool completely before attempting any work on the oil system to prevent burns from hot oil or engine components.
• Wear appropriate personal protective equipment, including safety glasses and gloves, to protect against oil splashes and sharp edges.
• Ensure the vehicle is securely supported on a level surface using jack stands if lifting is required. Never rely solely on a jack.
• స్థానిక పర్యావరణ నిబంధనల ప్రకారం ఉపయోగించిన చమురు మరియు చమురు ఫిల్టర్లను బాధ్యతాయుతంగా పారవేయండి.
• Refer to your vehicle's specific service manual for detailed instructions and torque specifications relevant to your vehicle model.

3. ఇన్‌స్టాలేషన్ (సెటప్)

Proper installation is crucial for the effective performance of your oil filter. The Ford Racing CM6731FL82 oil filter has a thread size of M16 x 1.5.

అవసరమైన సాధనాలు మరియు పదార్థాలు:

• ఆయిల్ ఫిల్టర్ రెంచ్
• డ్రెయిన్ పాన్
• New engine oil (refer to vehicle specifications)
• గుడ్డలు లేదా షాపు తువ్వాళ్లను శుభ్రం చేయండి
• డ్రెయిన్ ప్లగ్ కోసం సాకెట్ రెంచ్ మరియు తగిన సాకెట్

ఇన్‌స్టాలేషన్ దశలు:

1. వాహనాన్ని సిద్ధం చేయండి: Park the vehicle on a level surface and engage the parking brake. Allow the engine to cool. If necessary, lift the vehicle safely using jack stands.
2. పాత నూనెను తీసివేయండి: Place a drain pan beneath the oil pan. Remove the oil drain plug and allow all old engine oil to drain completely. Reinstall the drain plug with a new washer if required, and tighten to vehicle manufacturer specifications.
3. పాత ఫిల్టర్ తొలగించండి: Position the drain pan under the old oil filter. Use an oil filter wrench to loosen and remove the old filter. Be prepared for residual oil to drain out.
4. క్లీన్ మౌంటు ఉపరితలం: Thoroughly clean the oil filter mounting surface on the engine block, ensuring no old gasket material remains.
5. కొత్త ఫిల్టర్ సిద్ధం చేయండి: Apply a thin film of new engine oil to the rubber gasket of the Ford Racing CM6731FL82 oil filter. This ensures a proper seal.
6. కొత్త ఫిల్టర్‌ను ఇన్‌స్టాల్ చేయండి: Thread the new oil filter onto the engine block by hand. Once the gasket makes contact with the engine block, tighten the filter an additional 3/4 to 1 full turn, or as specified in your vehicle's service manual. Do not overtighten.
7. ఇంజిన్ ఆయిల్ నింపండి: Remove the engine oil filler cap and add the recommended amount and type of new engine oil as specified by your vehicle manufacturer.
8. లీక్‌ల కోసం తనిఖీ చేయండి: Start the engine and let it run for a few minutes. Turn off the engine and check for any oil leaks around the new filter and drain plug. If leaks are present, re-check tightness.
9. ఆయిల్ లెవెల్ వెరిఫై చేయండి: After checking for leaks, wait a few minutes for the oil to settle, then check the engine oil level using the dipstick and add more oil if necessary.

Image 1: Ford Racing CM6731FL82 High Performance Oil Filter. This image displays the exterior of the oil filter, highlighting its white finish and robust construction.

4. ఆపరేటింగ్

Once properly installed, the Ford Racing CM6731FL82 oil filter operates continuously with the engine to remove contaminants from the engine oil. Its design ensures long life with both standard and synthetic motor oils, providing consistent filtration performance throughout its service interval.

After installation, ensure the engine oil level is correct and there are no leaks. The filter will perform its function automatically as the engine runs.

5. నిర్వహణ

The primary maintenance for the Ford Racing CM6731FL82 oil filter is its timely replacement. Always adhere to the oil and filter change intervals recommended by your vehicle manufacturer. These intervals are typically found in your vehicle's owner's manual or service schedule. Regular replacement ensures optimal engine protection and performance.

6. ట్రబుల్షూటింగ్

Oil Leaks After Installation:

• కారణం: Improperly tightened filter, damaged gasket, or old gasket material remaining on the engine block.
• పరిష్కారం: Turn off the engine and allow it to cool. Carefully inspect the filter for tightness. If loose, tighten an additional small amount (e.g., 1/4 turn). If the leak persists, remove the filter, inspect the gasket for damage, and ensure the engine mounting surface is clean and free of debris. Reinstall the filter carefully.

సరికాని ఫిట్:

• కారణం: Incorrect oil filter model for the vehicle.
• పరిష్కారం: Verify that the CM6731FL82 model is the correct filter for your specific vehicle application. Consult your vehicle's owner's manual or a reputable parts catalog.

7. స్పెసిఫికేషన్లు

8. వారంటీ మరియు మద్దతు

For information regarding product warranty, please refer to the official Ford Racing documentation or contact Ford customer support directly. Support contact details can typically be found on the official Ford webసైట్ లేదా ఉత్పత్తి ప్యాకేజింగ్.