Empire White Mountain Hearth VFSR30NAT 30-Inch Vent-Free Natural Gas Slope Glaze Burner Instruction Manual

1. ఉత్పత్తి ముగిసిందిview

The Empire White Mountain Hearth VFSR30NAT is a 30-inch vent-free slope glaze burner designed for use with natural gas. This burner system incorporates ceramic beads to enhance flame appearance, creating a realistic fire effect. It features a Millivolt Safety Valve with an integrated on/off switch for user control and is remote-ready for convenience. The burner is capable of producing up to 38,000 BTU and requires an Empire "LS" log set of the same size for proper operation.

ముఖ్య లక్షణాలు:

• Internal Ceramic Beads: Designed to tumble gas, creating a dynamic and realistic flame pattern.
• Millivolt Valve: Includes an on/off switch for direct control of the burner.
• ఇంధన రకం: Operates on Natural Gas.
• పరిమాణం: 30-inch burner, compatible with Empire "LS" log sets of matching size.
• హీట్ అవుట్‌పుట్: Up to 38,000 British Thermal Units (BTU).

మూర్తి 1: The Empire White Mountain Hearth VFSR30NAT 30-inch vent-free natural gas slope glaze burner shown with an Empire "LS" log set and active flames, illustrating its realistic fire appearance.

2. భద్రతా సమాచారం

హెచ్చరిక: సరికాని సంస్థాపన, సర్దుబాటు, మార్పు, సేవ లేదా నిర్వహణ గాయం లేదా ఆస్తి నష్టానికి కారణం కావచ్చు. ఈ పరికరాన్ని ఇన్‌స్టాల్ చేయడానికి లేదా సర్వీసింగ్ చేయడానికి ముందు ఇన్‌స్టాలేషన్, ఆపరేటింగ్ మరియు నిర్వహణ సూచనలను పూర్తిగా చదవండి.

• This appliance is for use with సహజ వాయువు మాత్రమే. Do not attempt to use with other fuel types.
• Vent-free gas appliances produce carbon monoxide. Ensure adequate ventilation and never operate in unventilated spaces.
• Always ensure proper clearances to combustible materials as specified in the full installation manual.
• ఇన్‌స్టాలేషన్ మరియు సర్వీస్ తప్పనిసరిగా అర్హత కలిగిన ఇన్‌స్టాలర్, సర్వీస్ ఏజెన్సీ లేదా గ్యాస్ సరఫరాదారుచే నిర్వహించబడాలి.
• ప్రతిపాదన 65 హెచ్చరిక: ఈ ఉత్పత్తి కార్బన్ మోనాక్సైడ్‌తో సహా రసాయనాలకు మిమ్మల్ని బహిర్గతం చేయగలదు, ఇది కాలిఫోర్నియా రాష్ట్రంలో పుట్టుకతో వచ్చే లోపాలు లేదా ఇతర పునరుత్పత్తి హానిని కలిగిస్తుంది. మరింత సమాచారం కోసం వెళ్ళండి www.P65Warnings.ca.gov.
• దుస్తులు లేదా ఇతర మండే పదార్థాలను ఉపకరణంపై లేదా సమీపంలో ఉంచవద్దు.
• Keep children and pets away from the appliance when it is in operation.

మూర్తి 2: This icon indicates that the burner is designed for Natural Gas fuel only. Verify your gas supply type before installation.

3. ప్యాకేజీ విషయాలు

Upon unpacking, verify that all components are present and undamaged. If any parts are missing or damaged, do not attempt to install or operate the burner. Contact your dealer or the manufacturer immediately.

• VFSR30NAT 30-Inch Vent-Free Slope Glaze Burner Assembly
• Millivolt Safety Valve (pre-installed)
• ఇన్స్ట్రక్షన్ మాన్యువల్
• మౌంటు హార్డ్‌వేర్ (వర్తిస్తే)

గమనిక: Log sets are sold separately and are required for proper operation and aesthetic completion. Ensure you have an Empire "LS" log set of matching size (30-inch) for this burner.

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

Installation of this vent-free gas burner must comply with local codes, or in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54. It is strongly recommended that installation be performed by a qualified professional.

4.1 Fireplace Requirements

This burner is designed for installation in a masonry or listed factory-built fireplace. Ensure your fireplace meets the minimum dimensions required for safe operation. Refer to the table below for non-Empire minimum firebox dimensions.

మూర్తి 3: Diagram illustrating key fireplace dimensions (Front width opening, Rear width, Depth, Height) and a table detailing minimum non-Empire firebox dimensions for various Vent-Free Slope Glaze Burner models, including the VFSR-30.

4.2 గ్యాస్ కనెక్షన్

Connect the burner to your natural gas supply line. All gas connections must be leak-tested before operating the appliance. Use only approved gas piping and fittings.

4.3 Millivolt Wiring

The Millivolt Safety Valve system requires specific wiring for operation, including connections for the thermopile, thermocouple, and optional remote control or wall switch. Refer to the wiring diagram for correct connections.

మూర్తి 4: Detailed wiring diagram for the Millivolt system, showing connections for the gas valve, thermopile, thermocouple, and optional remote control receiver or wall switch. Ensure all wiring is performed by a qualified technician.

4.4 Log Set Placement

Carefully place the Empire "LS" log set onto the burner according to the log set's specific instructions. Incorrect log placement can affect flame appearance and burner performance, and may lead to carbon monoxide production.

5. ఆపరేటింగ్ సూచనలు

5.1 పైలట్‌ను వెలిగించడం

1. Ensure the gas supply to the appliance is turned on.
2. Locate the control knob on the Millivolt Safety Valve.
3. Push the control knob in and turn it to the "PILOT" position.
4. While holding the knob in, press the igniter button repeatedly until the pilot flame lights.
5. Continue to hold the control knob in for approximately 60 seconds after the pilot lights to allow the thermocouple to heat up.
6. Release the control knob. If the pilot extinguishes, repeat the lighting procedure.
7. పైలట్ వెలిగిన తర్వాత, కంట్రోల్ నాబ్‌ను "ఆన్" స్థానానికి తిప్పండి.

5.2 Turning On the Main Burner

After the pilot is lit and the control knob is in the "ON" position:

• మాన్యువల్ ఆపరేషన్: Use the on/off switch located on the Millivolt Safety Valve to turn the main burner on or off.
• రిమోట్ ఆపరేషన్ (ఐచ్ఛికం): If a remote control receiver is installed, use the remote control to activate the main burner. Refer to your remote control's instructions for pairing and operation.

5.3 Turning Off the Burner

• To turn off the main burner, use the on/off switch or remote control.
• To turn off the pilot, turn the control knob on the Millivolt Safety Valve to the "OFF" position.
• For extended periods of non-use, it is recommended to turn off the gas supply to the appliance.

6. నిర్వహణ

Regular maintenance ensures safe and efficient operation of your burner. All maintenance should be performed by a qualified service technician.

• వార్షిక తనిఖీ: Have the burner and gas connections inspected annually by a qualified service technician. This includes checking for gas leaks, proper pilot and main burner operation, and condition of the ceramic beads and log set.
• శుభ్రపరచడం: Keep the burner area free from dust, lint, and debris. Use a soft brush or vacuum cleaner to gently clean the burner ports and pilot assembly. Do not use abrasive cleaners.
• లాగ్ సెట్: Inspect the log set periodically for cracks or deterioration. Replace any damaged logs to maintain proper flame pattern and safety.
• Ceramic Beads: Ensure the ceramic beads are properly positioned over the burner. If they become dislodged, carefully reposition them according to the original setup.

7. ట్రబుల్షూటింగ్

If you experience issues with your burner, consult the following common troubleshooting steps. For problems not listed or if issues persist, contact a qualified service technician.

8. స్పెసిఫికేషన్లు

9. వారంటీ మరియు మద్దతు

9.1 వారంటీ సమాచారం

This Empire White Mountain Hearth burner comes with a పరిమిత వారంటీ. Specific terms and conditions of the warranty, including coverage duration and what is covered, are typically provided with the product packaging or can be obtained from the manufacturer. Please retain your proof of purchase for warranty claims.

9.2 కస్టమర్ మద్దతు

For technical assistance, parts, or warranty inquiries, please contact Empire customer support. Refer to the contact information provided in your product packaging or visit the official Empire webఅత్యంత తాజా మద్దతు వివరాల కోసం సైట్.

When contacting support, please have your model number (VFSR30NAT) and proof of purchase readily available.