1. ఉత్పత్తి ముగిసిందిview
The MOOG ES800408 Steering Tie Rod End is engineered for reliable performance and ease of installation. It features advanced problem-solving innovations designed to enhance durability and steering precision. This component is crucial for maintaining proper steering control and vehicle stability.
Image 1.1: The MOOG ES800408 Steering Tie Rod End, a critical component for vehicle steering and suspension.
2 కీ ఫీచర్లు
- Patented Pressed-in Cover Plate: Seals out debris and minimizes looseness, contributing to reduced bearing wear and extended life.
- గ్రీజబుల్ సాకెట్: Allows for the introduction of new lubricant, which helps to flush out debris and inhibit rust and wear.
- Belleville Preload Washer: Assists in maintaining a tight bearing package as bearings experience wear, absorbing impact and maintaining performance.
- Problem Solver Gusher Bearing: Features a metal-to-metal design that provides strength and facilitates grease flow through the bearing surface, reducing friction and extending operational life.
- Heat-Treated Ball Studs: Ball studs undergo a heat treatment process to meet or exceed original equipment (OE) requirements, preventing premature failure and improving fatigue strength.
- Precision Tolerances: Manufactured with precise tolerances to ensure straightforward installation and accurate steering alignment.
Image 2.1: Close-up of the patented pressed-in cover plate, designed to protect internal components from contaminants.
Image 2.2: Illustration of the greaseable design, enabling easy maintenance and extended component life.
చిత్రం 2.3: వివరణాత్మకమైనది view of the slotted Gusher Bearing, designed to deliver consistent lubrication.
Image 2.4: Visual representation of a heat-treated stud, emphasizing its enhanced strength and durability.
Image 2.5: A mechanic installing a tie rod end, illustrating the ease of installation due to precision engineering.
3. అనుకూలత
The MOOG ES800408 Steering Tie Rod End is compatible with the following vehicle models:
- 2007-2010 క్రిస్లర్ సెబ్రింగ్
- 2011-2014 క్రిస్లర్ 200
- 2008-2014 డాడ్జ్ అవెంజర్
- 2007-2012 డాడ్జ్ కాలిబర్
- 2009-2020 Dodge Journey
- 2007-2016 జీప్ కంపాస్
- 2017-2017 జీప్ కంపాస్
- 2007-2017 జీప్ పేట్రియాట్
Note: Always verify compatibility using your vehicle's specific year, make, model, engine, and trim information before purchase.
4. పెట్టెలో ఏముంది
ప్రతి ప్యాకేజీలో ఇవి ఉన్నాయి:
- 1 x MOOG ES800408 Steering Tie Rod End
5. ఇన్స్టాలేషన్ (సెటప్)
Proper installation is critical for the safe and effective operation of your vehicle's steering system. It is recommended that installation be performed by a qualified mechanic or an individual with appropriate automotive repair experience.
సాధారణ ఇన్స్టాలేషన్ మార్గదర్శకాలు:
- మొదటి భద్రత: వాహనం సురక్షితంగా ఎత్తబడి, జాక్ స్టాండ్లపై మద్దతు ఇవ్వబడిందని నిర్ధారించుకోండి. అవసరమైతే బ్యాటరీని డిస్కనెక్ట్ చేయండి.
- పాత భాగాన్ని తొలగించండి: Loosen the jam nut on the tie rod end. Remove the cotter pin and castle nut from the tie rod end stud. Use a tie rod end puller or separator to detach the old tie rod end from the steering knuckle.
- కొలత మరియు మార్కింగ్: Before removing the old tie rod end completely, measure the exposed thread length on the inner tie rod. This measurement will help in setting the new tie rod end to a similar length, aiding in initial alignment. Mark the position of the jam nut on the inner tie rod.
- కొత్త భాగాన్ని ఇన్స్టాల్ చేయండి: Thread the new MOOG ES800408 tie rod end onto the inner tie rod, matching the previously measured length. Ensure the stud is centered in the socket during installation to prevent premature wear.
- సురక్షిత ఫాస్టెనర్లు: Tighten the castle nut to the manufacturer's specified torque. Insert a new cotter pin to secure the castle nut. Tighten the jam nut against the tie rod end.
- తుది అమరిక: After installation, a professional wheel alignment is mandatory to ensure correct steering geometry and prevent uneven tire wear.
Installation Tips Video:
Video 5.1: This video provides helpful tips for installing MOOG tie rod ends, focusing on proper techniques to ensure longevity and performance.
6. నిర్వహణ
Regular maintenance of your MOOG ES800408 Steering Tie Rod End is essential for maximizing its lifespan and ensuring continued safe vehicle operation. The greaseable design allows for periodic lubrication.
లూబ్రికేషన్ విధానం:
- Access Grease Fitting: Locate the grease fitting (zirk) on the tie rod end.
- Clean Fitting: Wipe any dirt or debris from the grease fitting to prevent contamination of the new grease.
- గ్రీజును పూయండి: Attach a grease gun to the fitting and slowly pump in new, compatible chassis grease until the boot begins to swell slightly. Do not overfill, as this can damage the boot.
- Inspect Boot: Ensure the grease boot is intact and free from cracks or tears after lubrication.
Greasable Design Video:
Video 6.1: This video highlights the benefits of MOOG's greaseable design, explaining how it helps maintain lubrication and extend component life.
7. Troubleshooting: Symptoms of Worn Tie Rod Ends
Recognizing the symptoms of a worn or failing tie rod end is crucial for timely repair and preventing further damage or safety hazards. If you experience any of the following, have your vehicle inspected by a qualified technician immediately.
సాధారణ లక్షణాలు:
- అసమాన టైర్ అరుగుదల: Irregular wear patterns on your tires, especially on the inner or outer edges, can indicate alignment issues caused by worn tie rod ends.
- Loose or Vibrating Steering Wheel: Excessive play in the steering wheel or vibrations felt through the steering wheel, particularly at higher speeds, may point to worn tie rod ends.
- క్లాంకింగ్ లేదా పాపింగ్ శబ్దాలు: Sounds like clunking, popping, or clicking coming from the front suspension, especially when turning or going over bumps, can be a sign of worn tie rod ends.
- వాహనాన్ని ఒక వైపుకు లాగడం: If your vehicle consistently pulls to the left or right, requiring constant steering correction to drive straight, worn tie rod ends could be a contributing factor.
Symptoms of Bad Tie Rods Video:
Video 7.1: This video explains the common symptoms associated with bad tie rod ends, helping vehicle owners identify potential issues.
8. స్పెసిఫికేషన్లు
| గుణం | విలువ |
|---|---|
| బ్రాండ్ | మూగ్ |
| మోడల్ | రాడ్ చివర కట్టు |
| అంశం మోడల్ సంఖ్య | ES800408 |
| వస్తువు బరువు | 1.38 పౌండ్లు |
| ఉత్పత్తి కొలతలు | 9.8 x 4.6 x 2.7 అంగుళాలు |
| తయారీదారు పార్ట్ నంబర్ | ES800408 |
| OEM పార్ట్ నంబర్ | ES800408 |
| స్థానం | కేంద్రం |
9. వారంటీ సమాచారం
MOOG products are backed by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official MOOG website or contact MOOG customer support directly. Keep your proof of purchase for warranty claims.
10. మద్దతు
For technical assistance, installation questions, or product support, please visit the official MOOG website or contact their customer service department. Professional installation is highly recommended for all steering and suspension components.
