Scosche HA1710B Double DIN Radio Install Dash Kit Instruction Manual

1. పరిచయం

This manual provides detailed instructions for installing the Scosche HA1710B Double DIN Radio Install Dash Kit. This kit is designed to facilitate the installation of an aftermarket car stereo into select 2001-05 Honda Civic vehicles, providing a factory-like appearance.

Please read all instructions carefully before beginning the installation process. Ensure all necessary tools and components are available.

2. అనుకూలత

This dash kit is compatible with select 2001-05 హోండా సివిక్ models. It is not compatible with Civic Si నమూనాలు.

For specific compatibility, refer to the fit guide image below. This kit is designed for Double DIN installations only.

Image: Fit Guide for Scosche HA1710B Dash Kit. This guide illustrates vehicle compatibility, specifically noting that the kit works with 2001-05 Honda Civic DX, LX, and EX models, but is not for use with Civic Si models. It also indicates that it is for Double DIN installations only.

Scosche Double DIN Kits accommodate True Double DIN stereos with a maximum faceplate opening of 96.8mm x 173mm. Some radios labeled as Double DIN may be oversized, potentially requiring minor trimming of the kit for a proper fit.

Image: Industry Standard Sized Opening. This diagram provides the dimensions for the stereo opening in the dash kit, which are 96.8mm (3-13/16 inches) in height and 173mm (6-13/16 inches) in width. This is for reference to ensure your aftermarket stereo will fit.

3. ప్యాకేజీ విషయాలు

క్రింద జాబితా చేయబడిన అన్ని వస్తువులు మీ ప్యాకేజీలో చేర్చబడ్డాయని ధృవీకరించండి:

• Radio Bezel (Dash Kit)
• ఇన్స్ట్రక్షన్ మాన్యువల్
• Mounting Brackets (Left and Right)
• Hardware (screws, clips)

Image: Scosche HA1710B Dash Kit. This image displays the primary dash kit bezel, which frames the aftermarket stereo.

చిత్రం: కోణీయ view of the Scosche HA1710B Dash Kit. This perspective highlights the design and mounting tabs of the dash kit bezel.

Image: Car Stereo Dash Kit Components. This image shows the dash kit along with representations of a wire harness and antenna adapter, noting that the latter two are sold separately.

4. భద్రతా సమాచారం

• షార్ట్ సర్క్యూట్లు మరియు విద్యుత్ షాక్‌లను నివారించడానికి ఏదైనా విద్యుత్ పనిని ప్రారంభించే ముందు వాహనం యొక్క నెగటివ్ బ్యాటరీ టెర్మినల్‌ను ఎల్లప్పుడూ డిస్‌కనెక్ట్ చేయండి.
• భద్రతా గ్లాసెస్ వంటి తగిన వ్యక్తిగత రక్షణ పరికరాలను ధరించండి.
• వాహనం పార్కింగ్ బ్రేక్ వేసి, చదునైన ఉపరితలంపై పార్క్ చేయబడిందని నిర్ధారించుకోండి.
• Refer to your vehicle's service manual for specific instructions on removing factory components.
• If you are unsure about any step, consult a qualified professional installer.

5. సంస్థాపన

The following video provides a comprehensive overview of the installation process, from preparation to final testing. Detailed steps are also provided below.

5.1. తయారీ

1. బ్యాటరీని డిస్‌కనెక్ట్ చేయండి: Disconnect the negative battery terminal of your vehicle.
2. Review సూచనలు: Read through the entire instruction manual provided with the dash kit and your new stereo.
3. Identify Tabs: రీ తర్వాతviewing the instructions, identify and remove any tabs on the dash kit components that are not required for your specific application.

5.2. Factory Radio Removal

4. Remove Trim Panels: Using a panel removal tool, carefully pry off and remove any trim panels surrounding your factory stereo.
5. Unscrew Factory Radio: Locate and unscrew the mounting screws holding the factory radio in place.
6. Unplug Harnesses: Gently pull out the factory radio and unplug all electrical harnesses and antenna cables from the back.

5.3. వైరింగ్ కనెక్షన్లు

Connect the aftermarket stereo's wiring harness to the vehicle's wiring harness. Match wire colors according to the instructions provided with your aftermarket stereo and the Scosche wiring adapter (if purchased separately).

• Use splice connectors or solder connections for secure and reliable electrical contact.
• Ensure all connections are properly insulated with electrical tape or heat shrink tubing.
• Some wires, such as amplifier turn-on, parking brake sense, and steering wheel control connections, may require specific routing or additional adapters not included in this kit.

5.4. Dash Kit Assembly

7. బ్రాకెట్లను అటాచ్ చేయండి: Secure the left and right mounting brackets to your new aftermarket stereo using the screws provided with the stereo.
8. Insert Stereo: Slide the assembled stereo and brackets into the dash kit bezel.

5.5. New Stereo Installation

9. వైరింగ్ కనెక్ట్ చేయండి: Plug the vehicle's wiring harness into the aftermarket stereo's harness. Connect the antenna cable.
10. Mount Stereo: Carefully slide the new stereo assembly into the dashboard opening. Secure it with the factory mounting screws.
11. Reinstall Trim: Reattach all removed trim panels, ensuring they snap securely into place.

5.6. చివరి దశలు

12. బ్యాటరీని మళ్లీ కనెక్ట్ చేయండి: ప్రతికూల బ్యాటరీ టెర్మినల్‌ని మళ్లీ కనెక్ట్ చేయండి.
13. పరీక్ష విధులు: Turn on the vehicle and test all functions of the new stereo, including audio, radio, and any connected accessories.

6. ఆపరేషన్

This dash kit provides the mounting solution for your aftermarket stereo. For detailed operating instructions of your new stereo, please refer to the instruction manual provided by the stereo manufacturer.

7. నిర్వహణ

• Periodically check the mounting screws for tightness.
• Clean the dash kit and stereo faceplate with a soft, damp వస్త్రం. కఠినమైన రసాయనాలు లేదా రాపిడి క్లీనర్లను నివారించండి.
• Ensure no debris accumulates around the stereo or in the dash opening.

8. ట్రబుల్షూటింగ్

• Stereo does not power on:
  • బ్యాటరీ కనెక్షన్లను తనిఖీ చేయండి.
  • Verify all wiring harness connections are secure and correct.
  • Check the stereo's fuse.
• Poor fit of stereo in dash kit:
  • Ensure all unnecessary tabs on the dash kit were removed.
  • Confirm your aftermarket stereo's dimensions are within the kit's specifications (96.8mm x 173mm). Minor trimming may be required for oversized units.
  • Verify factory radio brackets are used as required.
• Dash kit does not fit vehicle:
  • Double-check vehicle compatibility (2001-05 Honda Civic, non-Si models).
  • Ensure all factory components were removed correctly.

9. స్పెసిఫికేషన్లు

10. వారంటీ మరియు మద్దతు

The Scosche HA1710B Dash Kit is backed by Scosche's Limited Lifetime Warranty and Lifetime Tech Support.

For technical assistance or warranty claims, please contact Scosche customer support directly. Refer to the official Scosche webసంప్రదింపు సమాచారం కోసం సైట్ లేదా ఉత్పత్తి ప్యాకేజింగ్.