పరిచయం
The Ansmann Energy 8 Plus is a universal battery charging and maintenance station designed for various rechargeable battery types. This device is capable of charging and maintaining 1-6 AAA or AA cells, 1-4 C or D cells, and 1-2 9V block batteries. It is compatible with NiMH and NiCd rechargeable batteries.
This manual provides essential information on the proper setup, operation, maintenance, and troubleshooting of your Ansmann Energy 8 Plus charger to ensure safe and efficient use.
Image: The Ansmann Energy 8 Plus charger, showcasing its multiple empty charging slots for various battery sizes.
సెటప్
అన్ప్యాకింగ్ మరియు ప్రారంభ తనిఖీ
- Carefully remove the Ansmann Energy 8 Plus charger from its packaging.
- Inspect the device for any signs of damage during transit. If any damage is observed, do not use the charger and contact customer support.
- Ensure all components are present: the Ansmann Energy 8 Plus charger unit and its power cable.
పవర్కి కనెక్ట్ అవుతోంది
- Place the charger on a stable, flat, and non-flammable surface, away from direct sunlight or heat sources.
- Connect the power cable to the charger's input port.
- Plug the other end of the power cable into a standard electrical outlet (100-240V AC, 50/60Hz).
- ఛార్జర్ ఇప్పుడు ఉపయోగం కోసం సిద్ధంగా ఉంది.
ఆపరేటింగ్ సూచనలు
బ్యాటరీలను చొప్పించడం
The Ansmann Energy 8 Plus supports various battery sizes and types. Ensure you are using only NiMH or NiCd rechargeable batteries. Do not attempt to charge non-rechargeable batteries.
- AAA/AA Cells: Insert 1-6 AAA or AA batteries into the designated slots, ensuring correct polarity (+ and -).
- C/D Cells: Insert 1-4 C or D batteries into the larger slots, ensuring correct polarity.
- 9V Block Batteries: Insert 1-2 9V block batteries into the dedicated 9V terminals, ensuring correct polarity.
Image: The Ansmann Energy 8 Plus charger with AAA, AA, C, D, and 9V batteries correctly inserted into their respective charging bays.
The charger features individual monitoring for each battery slot, allowing for simultaneous charging of different battery types and capacities. The device automatically detects defective or incorrectly inserted batteries (e.g., reversed polarity or disposable batteries) and will not attempt to charge them.
Charging Process and Indicators
The Ansmann Energy 8 Plus automatically initiates the charging process upon battery insertion. It includes a refreshing and recharge process, and can even "revive" some damaged batteries.
The charger is equipped with LED indicators for each charging bay to display the status:
- ఎరుపు LED (మెరిసేది): Indicates a defective battery or incorrect insertion. Remove the battery and check.
- Red LED (Solid): బ్యాటరీ ప్రస్తుతం ఛార్జ్ అవుతోంది.
- ఆకుపచ్చ LED (ఘన): Charging is complete, and the charger has switched to trickle charge mode to maintain the battery's full capacity.
The charger incorporates multiple overcharging protection mechanisms and automatically completes the charging process, switching to trickle charge to prevent battery damage.
Image: The Ansmann Energy 8 Plus charger actively charging batteries, with visible LED indicators showing charging status.
నిర్వహణ
ఛార్జర్ను శుభ్రపరచడం
- శుభ్రపరిచే ముందు ఎల్లప్పుడూ పవర్ అవుట్లెట్ నుండి ఛార్జర్ను అన్ప్లగ్ చేయండి.
- ఛార్జర్ యొక్క బాహ్య భాగాన్ని తుడవడానికి మృదువైన, పొడి వస్త్రాన్ని ఉపయోగించండి.
- Do not use liquid cleaners, abrasive pads, or chemical solvents, as these can damage the device.
- Ensure no dust or debris accumulates in the battery slots. Use a soft brush or compressed air if necessary.
నిల్వ
- ఉపయోగంలో లేనప్పుడు, ఛార్జర్ను చల్లని, పొడి ప్రదేశంలో, ప్రత్యక్ష సూర్యకాంతి మరియు తీవ్రమైన ఉష్ణోగ్రతలకు దూరంగా నిల్వ చేయండి.
- It is recommended to unplug the charger when not in use for extended periods, as the internal power supply may remain slightly warm.
ట్రబుల్షూటింగ్
If you encounter issues with your Ansmann Energy 8 Plus charger, please refer to the following common problems and solutions:
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| ఛార్జర్ ఆన్ కావడం లేదు. | విద్యుత్ సరఫరా లేదు; కనెక్షన్ కోల్పోయింది. | Ensure the power cable is securely plugged into both the charger and the wall outlet. Check if the outlet is functional. |
| Red LED blinking for a battery. | Defective battery; incorrect battery type (non-rechargeable); reversed polarity. | Remove the battery and re-insert it with correct polarity. Ensure it is a NiMH or NiCd rechargeable battery. If the LED still blinks, the battery may be defective and should be replaced. |
| Batteries not charging or taking too long. | Battery capacity too high for charging current; very deeply discharged battery. | Allow more time for charging, especially for high-capacity batteries. The charger may be performing a refreshing cycle for deeply discharged batteries. |
| ఛార్జర్ పనిచేసేటప్పుడు వెచ్చగా అనిపిస్తుంది. | సాధారణ ఆపరేషన్; తగినంత వెంటిలేషన్ లేదు. | It is normal for the charger to become warm during charging. Ensure it is placed on a hard, flat surface with adequate ventilation. If it becomes excessively hot, unplug it immediately and contact support. |
If the problem persists after attempting these solutions, please contact Ansmann customer support.
స్పెసిఫికేషన్లు
| ఫీచర్ | వివరాలు |
|---|---|
| ఉత్పత్తి కొలతలు | 8 x 3 x 10.5 అంగుళాలు |
| వస్తువు బరువు | 1.33 పౌండ్లు (605 గ్రాములు) |
| తయారీదారు | Ansmann USA Corporation |
| మోడల్ సంఖ్య | 5207442/US |
| అనుకూలమైన బ్యాటరీ రకాలు | NiMH/NiCd rechargeable batteries |
| మద్దతు ఉన్న బ్యాటరీ పరిమాణాలు | AAA, AA, C, D, 9V |
| ఛార్జింగ్ కరెంట్స్ | 1000mA (AA, C, D), 400mA (AAA), 60mA (9V) |
| అవుట్పుట్ వాల్యూమ్tage | 1.2 వోల్ట్లు |
| రంగు | నీలం |
| మొదటి తేదీ అందుబాటులో ఉంది | జూలై 9, 2010 |
Image: The Ansmann Energy 8 Plus charger connected and in use amidst various electronic testing equipment, highlighting its professional application.
వారంటీ సమాచారం
The Ansmann Energy 8 Plus charger typically comes with a manufacturer's warranty. Based on available information, Ansmann products often include a 3-year warranty. Please refer to the original product packaging or the official Ansmann website for the most accurate and up-to-date warranty terms and conditions specific to your region.
ఏవైనా వారంటీ క్లెయిమ్లకు కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదును ఉంచండి.
Image: The retail packaging for the Ansmann Energy 8 Plus charger, displaying product features and a "3 Jahre Warranty" (3 Years Warranty) badge.
మద్దతు మరియు సంప్రదించండి
For further assistance, technical support, or warranty inquiries, please contact Ansmann customer service.
- అధికారిక Webసైట్: సందర్శించండి Ansmann official webసైట్ for product information and support contacts.
- యూజర్ మాన్యువల్ (PDF): A detailed PDF version of the user manual is available for download: వినియోగదారు మాన్యువల్ని డౌన్లోడ్ చేయండి.
- తయారీదారు: Ansmann USA Corporation
When contacting support, please have your product model number (5207442/US) and purchase details ready.
