ఉత్పత్తి ముగిసిందిview
The Pico 7146QT Nylon Cable Clamps are designed for efficiently channeling and securing cables and wires. These durable clamps provide a reliable solution for organizing electrical wiring in various applications. Each package contains 3 clamps, offering convenience for multiple installations.
ముఖ్య లక్షణాలు:
- లోపలి వ్యాసం: 5/8" (when closed)
- Clamp వెడల్పు: 1/2"
- Screw Hole Diameter: 0.203"
- రంగు: నలుపు
- పరిమాణం: 3 clamps per package
ఈ clamps are engineered to withstand a wide range of temperatures, with a maximum operating temperature from -60°F to 275°F, ensuring performance in diverse environments.
Image: A single black nylon cable clamp, showing its circular shape when closed and the screw hole for mounting. This clamp is designed for securing cables with a 5/8 inch diameter.
సెటప్ మరియు ఇన్స్టాలేషన్
Before installation, ensure the cable or wire bundle to be secured has an outside diameter of approximately 5/8 inches or less to fit properly within the clamp's closed diameter.
- మౌంటు స్థానాన్ని గుర్తించండి: Choose a suitable surface for mounting the cable clamp. The surface should be clean, dry, and capable of securely holding a screw.
- Cl స్థానంలో ఉంచండిamp: కేబుల్ cl ఉంచండిamp కావలసిన స్థానంలో. clamp has a pre-drilled screw hole with a 0.203" diameter.
- Mark and Drill (if necessary): cl ఉపయోగించండిamp's screw hole as a guide to mark the drilling point on the mounting surface. If the surface requires it, pre-drill a pilot hole appropriate for your chosen mounting screw.
- Insert Cables: cl తెరవండిamp slightly and insert the cable(s) or wire bundle into the clamp's interior. Ensure the cables are neatly routed and not under excessive tension.
- Clను సురక్షితం చేయండిamp: Insert a suitable screw (not included) through the clamp's screw hole and fasten it securely to the mounting surface. Do not overtighten, as this may damage the clamp లేదా మౌంటు ఉపరితలం.
- భద్రతను ధృవీకరించండి: Gently tug on the secured cables to ensure the clamp is firmly attached and the cables are held in place without excessive movement.
Note: Always use appropriate safety measures when working with tools and electrical components.
ఆపరేటింగ్ మార్గదర్శకాలు
These cable clamps are passive components designed to provide a fixed routing and securing point for cables and wires. Once installed, they require no active operation.
ఉత్తమ పద్ధతులు:
- Ensure the cables are not pinched or excessively compressed by the clamp.
- Distribute cable weight evenly across multiple clamps if securing long or heavy runs.
- Avoid installing clamps in areas subject to extreme abrasion or chemical exposure that could degrade nylon.
నిర్వహణ
Pico nylon cable clamps are designed for long-term durability and require minimal maintenance.
- ఆవర్తన తనిఖీ: Periodically inspect installed clamps for any signs of wear, cracking, or loosening, especially in high-vibration environments or areas with significant temperature fluctuations.
- శుభ్రపరచడం: If necessary, clean the clampప్రకటనతో లుamp cloth. Avoid harsh chemical cleaners that may degrade the nylon material.
- భర్తీ: ఒక cl ఉంటేamp shows signs of damage or degradation, replace it immediately to maintain the integrity of your cable management system.
ట్రబుల్షూటింగ్
Most issues related to cable clamps are due to improper installation or selection.
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| Cables are loose within the clamp. | Clamp ID is too large for the cable bundle. | ఒక cl ఉపయోగించండిamp with a smaller inside diameter. Ensure the cable bundle fills the clamp తగినంతగా. |
| Clamp సంస్థాపన సమయంలో విరామాలు. | Overtightening of the mounting screw. | Do not overtighten. Fasten until snug, then a quarter turn more. |
| Clamp becomes brittle or cracks over time. | Exposure to extreme temperatures outside specified range or harsh chemicals. | Ensure operating environment is within -60°F to 275°F. Avoid chemical exposure. Replace damaged clamps. |
| Clamp detaches from mounting surface. | Improper screw size or type; insufficient mounting surface. | Use a screw appropriate for the 0.203" hole and the mounting material. Ensure the surface is strong enough. |
స్పెసిఫికేషన్లు
| గుణం | వివరాలు |
|---|---|
| పార్ట్ నంబర్ | 7146 క్యూటి |
| మోడల్ సంఖ్య | 7146 |
| బ్రాండ్ | పికో |
| తయారీదారు | Pacific Industrial Components |
| మెటీరియల్ | నైలాన్ |
| Inside Diameter (Closed) | 5/8 అంగుళాలు |
| Clamp వెడల్పు | 1/2 అంగుళాలు |
| Screw Hole Diameter | 0.203 అంగుళాలు |
| రంగు | నలుపు |
| అంశం ప్యాకేజీ పరిమాణం | 3 |
| వస్తువు బరువు | 0.32 ఔన్సులు (9.07 గ్రాములు) |
| గరిష్ట ఆపరేటింగ్ ఉష్ణోగ్రత | 275°F |
| కనిష్ట ఆపరేటింగ్ ఉష్ణోగ్రత | -60 ° F. |
| ASIN | B004C07XW2 |
| UPC | 035704971462 |
| మొదటి తేదీ అందుబాటులో ఉంది | జూన్ 3, 2007 |
వారంటీ మరియు మద్దతు
For specific warranty information regarding the Pico 7146QT Nylon Cable Clamps, please refer to the packaging or contact Pacific Industrial Components directly. General product support and inquiries can also be directed to the manufacturer.
తయారీదారు: Pacific Industrial Components
For the most up-to-date contact information, please visit the official Pico or Pacific Industrial Components website or consult your purchase documentation.
