1. పరిచయం
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Geberit TurnControl cable-operated bath waste and overflow drain, model 151.501.00.1. Please read these instructions carefully before beginning installation or use to ensure proper function and safety.
The Geberit TurnControl system is designed for concealed bath waste and overflow drains in bathtubs or tub/shower enclosures, offering a reliable and efficient solution for managing bathtub water levels.
2. భద్రతా సమాచారం
- ఏదైనా ప్లంబింగ్ పనిని ప్రారంభించే ముందు ఎల్లప్పుడూ ప్రధాన నీటి సరఫరాను ఆపివేయండి.
- సంస్థాపన సమయంలో భద్రతా గ్లాసెస్ మరియు చేతి తొడుగులు వంటి తగిన వ్యక్తిగత రక్షణ పరికరాలు (PPE) ధరించండి.
- లీకేజీలను నివారించడానికి అన్ని కనెక్షన్లు సురక్షితంగా మరియు వాటర్టైట్గా ఉన్నాయని నిర్ధారించుకోండి.
- Consult local plumbing codes and regulations to ensure compliance. This product is not suitable where glued joints are required.
- ఇన్స్టాలేషన్ ప్రక్రియలో ఏదైనా భాగం గురించి మీకు ఖచ్చితంగా తెలియకపోతే, అర్హత కలిగిన ప్లంబర్ను సంప్రదించండి.
3. ఉత్పత్తి ముగిసిందిview
The Geberit TurnControl waste and overflow drain system consists of a cable-operated mechanism for opening and closing the drain, an overflow assembly, and a drain body. This product is the rough-in body only and does not include the trim kit (e.g., Euro or Traditional TurnControl trim kits), which must be purchased separately.
Figure 1: Geberit TurnControl Waste and Overflow Drain Assembly. This image displays the complete internal assembly, including the overflow plate with the rotary control mechanism, the connecting cable, and the drain body with the integrated strainer.
4. సెటప్ మరియు ఇన్స్టాలేషన్
This section outlines the general steps for installing the Geberit TurnControl waste and overflow drain. Specific details may vary based on your bathtub model and local plumbing practices.
4.1 ప్రీ-ఇన్స్టాలేషన్ తనిఖీలు
- Verify that your bathtub is compatible. This drain fits most tubs 12 to 16 inches deep.
- Ensure your bathtub has a 2-inch (52mm) diameter drain hole opening.
- Confirm your bathtub has a 2-inch to 2.5-inch diameter overflow hole opening.
- Acquire the appropriate Euro or Traditional TurnControl trim kit, as this product is the rough-in body only.
4.2 సంస్థాపనా దశలు
- Prepare the Bathtub: Ensure the drain and overflow holes are clean and free of debris.
- Install the Drain Body: Apply plumber's putty or a suitable sealant around the drain opening on the bathtub. Insert the drain body from inside the tub and secure it from underneath with the provided gasket and nut. Tighten firmly but do not overtighten.
- Install the Overflow Assembly: Position the overflow gasket and the overflow elbow onto the bathtub's overflow hole from the underside. Connect the overflow pipe to the drain body.
- కేబుల్ కనెక్ట్ చేయండి: Route the cable from the overflow assembly to the drain stopper mechanism. Ensure the cable is not kinked or obstructed.
- లీక్ల కోసం పరీక్ష: Once all connections are made, fill the bathtub with water and check for any leaks around the drain and overflow connections. Address any leaks immediately.
- Install Trim Kit: Follow the instructions provided with your chosen Geberit TurnControl trim kit (not included with this product) to complete the installation of the visible components.
5. ఆపరేటింగ్ సూచనలు
The Geberit TurnControl waste and overflow drain is operated via a manual rotary mechanism located on the overflow trim plate (trim kit sold separately).
- డ్రెయిన్ మూసివేయడానికి: Rotate the TurnControl knob on the overflow trim plate in the direction indicated (typically clockwise) until the drain stopper is fully closed. This will allow the bathtub to fill with water.
- డ్రెయిన్ తెరవడానికి: Rotate the TurnControl knob in the opposite direction (typically counter-clockwise) until the drain stopper is fully open. This will allow the water to drain from the bathtub.
Ensure the knob turns smoothly. Do not force the mechanism if resistance is encountered.
6. నిర్వహణ
Regular maintenance helps ensure the longevity and proper function of your Geberit TurnControl drain.
- శుభ్రపరచడం: Clean the visible trim components regularly with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals that could damage the finish.
- Strainer Cleaning: Periodically remove any hair or debris that may accumulate in the drain strainer to maintain optimal drainage. The stainless steel strainer can be cleaned with a brush.
- కేబుల్ తనిఖీ: If drainage issues occur, inspect the cable mechanism for any obstructions or damage. Access to the cable may require professional assistance or removal of the bathtub access panel.
7. ట్రబుల్షూటింగ్
This section addresses common issues you might encounter with your Geberit TurnControl drain.
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| నెమ్మదిగా నీరు కారడం | Hair or debris in the drain. | Remove and clean the drain strainer. |
| Drain Does Not Close/Open Fully | Cable obstruction or misalignment. | Inspect the cable for kinks or obstructions. Ensure the trim kit is correctly installed and aligned. |
| Leakage Around Drain/Overflow | Improperly sealed connections or damaged gaskets. | Check all connections for tightness. Reapply plumber's putty or replace gaskets if necessary. |
If problems persist after attempting these solutions, contact Geberit customer support or a qualified plumber.
8. స్పెసిఫికేషన్లు
| ఫీచర్ | వివరాలు |
|---|---|
| మోడల్ సంఖ్య | 151.501.00.1 |
| తయారీదారు | గెబెరిట్ |
| ఉత్పత్తి రకం | Cable-operated bath waste & overflow drain (rough-in body) |
| మెటీరియల్ | Polypropylene (drain body), Stainless Steel (strainer) |
| టబ్ డెప్త్ అనుకూలత | 12" - 16" |
| Drain Hole Diameter | 2" (52మి.మీ) |
| Overflow Hole Diameter | 2" - 2.5" |
| యాక్టివేషన్ రకం | Manual Rotary TurnControl |
9. వారంటీ మరియు మద్దతు
For warranty information, technical support, or to purchase replacement parts, please contact Geberit customer service directly. Refer to the official Geberit webఅత్యంత తాజా సంప్రదింపు వివరాలు మరియు వారంటీ నిబంధనల కోసం సైట్ లేదా ఉత్పత్తి ప్యాకేజింగ్.
తయారీదారు: గెబెరిట్
మోడల్ సంఖ్య: 151.501.00.1
