1. పరిచయం
The Two Notes Torpedo Captor 4 is a versatile device designed for guitar and bass players using tube amplifiers. It functions as a reactive load box, an attenuator, a direct injection (DI) box, and a speaker simulator. This unit allows you to safely connect your tube amplifier without a speaker cabinet, reduce your amplifier's volume for practice or recording, and send a high-quality, cabinet-simulated signal directly to a mixing console or audio interface.
This manual provides essential information for the safe and effective operation of your Torpedo Captor 4. Please read it thoroughly before use.
2. భద్రతా సమాచారం
WARNING: Risk of Electric Shock. Do not open the enclosure. Refer servicing to qualified personnel only.
- Always connect your amplifier's speaker output to a suitable load. The Torpedo Captor 4 provides a 4-ohm reactive load. Ensure your amplifier's output impedance matches the Captor's impedance.
- మీ సెట్ చేయవద్దు amp master volume to maximum when connected to the Captor 4, especially when using the attenuator, to avoid possible damage to your amplifier or the Captor.
- This device is designed for tube amplifiers up to 100 Watts RMS. Exceeding this power rating can cause damage.
- Ensure proper ventilation. Do not block ventilation slots.
- పరికరాన్ని నీరు, తేమ మరియు తీవ్రమైన ఉష్ణోగ్రతల నుండి దూరంగా ఉంచండి.
- Use only the specified power supply (9 to 24VDC, 5mA) for the DI section if phantom power is not available.
3. ఉత్పత్తి ముగిసిందిview
The Torpedo Captor 4 features a robust black metal enclosure with clearly labeled inputs, outputs, and controls.
మూర్తి 3.1: ముందు View of the Torpedo Captor 4. This image shows the top and front of the black rectangular unit, displaying the 'Two Notes Audio Engineering' logo and 'Torpedo Captor 4' branding. It also indicates its functions: '100W 4Ω LOADBOX', 'ATTENUATOR', 'SPEAKERSIM', and 'DI'.
చిత్రం 3.2: వెనుక ప్యానెల్ కనెక్షన్లు. This image displays the rear panel of the Torpedo Captor 4, featuring the 'SPEAKER IN' (100W RMS MAX TS) and 'SPEAKER OUT' (THRU and ATT -20dB TS) jacks. A prominent notice warns users to always connect their amp output to a suitable load and not to set the amp master volume to max. A cooling fan is also visible.
Figure 3.3: Front Panel Controls and DI Output. This image shows the front panel of the Torpedo Captor 4, highlighting the 'LINE (DRY)' TRS output, 'DI' XLR output with 'GND LIFT' switch, 'OUT LEVEL' knob, 'PHASE' switch (0°/180°), and 'SPKR SIM' switch (OFF/GTR/BASS). A 48V Phantom Power indicator and a DC input for 9 to 24VDC are also visible.
ముఖ్య లక్షణాలు:
- Reactive Load Box: Provides a stable 4-ohm load for your tube amplifier, allowing it to operate safely without a speaker cabinet.
- అటెన్యుయేటర్: Reduces your amplifier's output by -20dB, enabling you to achieve cranked-amp tones at lower, more manageable volumes.
- Direct Box (DI): Offers a balanced XLR output for sending your amplifier's signal directly to a mixer or audio interface.
- Speaker Simulator: Built-in analog speaker simulation (Guitar and Bass modes) for the DI output, eliminating the need for microphone placement.
- లైన్ అవుట్పుట్: An unbalanced 1/4" TRS line output provides a dry signal for re-amping లేదా తదుపరి ప్రాసెసింగ్.
- గ్రౌండ్ లిఫ్ట్: A switch on the DI output helps eliminate hum and ground loops.
- దశ స్విచ్: Allows for phase inversion (0° or 180°) on the DI output.
4. సెటప్
Before connecting, ensure your ampలైఫైయర్ ఆఫ్ చేయబడింది మరియు పవర్ సోర్స్ నుండి అన్ప్లగ్ చేయబడింది.
4.1 Basic Connection (Load Box/Attenuator Mode)
- Connect your tube amplifier's speaker output (ensure it's a 4-ohm output if your amp has multiple options) to the స్పీకర్ ఇన్ (TS 1/4") jack on the rear panel of the Torpedo Captor 4. Use a high-quality speaker cable.
- If you wish to use an external speaker cabinet with attenuation, connect the SPEAKER OUT ATT -20dB (TS 1/4") jack to your speaker cabinet. This will reduce the volume by 20dB.
- If you wish to use an external speaker cabinet without attenuation (pass-through), connect the SPEAKER OUT THRU (TS 1/4") jack to your speaker cabinet. The Captor will still provide a load to the amp, but the signal passes through to the speaker at full volume.
- For silent recording or practice, you do not need to connect anything to the SPEAKER OUT jacks. The Captor 4 provides the necessary load.
4.2 DI Output Connection
- కనెక్ట్ చేయండి DI (XLR) output to your mixing console, audio interface, or PA system using a standard XLR cable.
- If your mixing console or audio interface provides 48V phantom power, the DI section of the Captor 4 will be powered automatically. Otherwise, connect a 9 to 24VDC power supply (not included) to the DC input jack on the front panel.
4.3 Line Output Connection
- కనెక్ట్ చేయండి LINE (DRY) (TRS 1/4") output to an input on your audio interface or other processing unit for a dry, unprocessed signal. This output is unbalanced.
Figure 4.1: Torpedo Captor 4 in a Studio Setup (Side View). This image shows the Torpedo Captor 4 placed on top of a guitar amplifier in a studio environment. Cables are connected to the rear panel, illustrating a typical setup for recording or attenuated playing. A studio console is visible in the background.
Figure 4.2: Torpedo Captor 4 in a Studio Setup (Front View). This image provides another perspective of the Torpedo Captor 4 connected to an amplifier in a studio. The front panel controls are visible, along with the connected cables, demonstrating the unit's compact size and integration into a professional audio setup.
5. ఆపరేటింగ్ సూచనలు
5.1 Using the Attenuator
ఒకసారి మీ amplifier కనెక్ట్ చేయబడింది స్పీకర్ ఇన్ and your speaker cabinet to the SPEAKER OUT ATT -20dB, you can turn on your amplifier. The Captor 4 will automatically reduce the volume by 20dB, allowing you to drive your amp harder for desired tone without excessive volume.
5.2 Using the DI Output with Speaker Simulation
- Ensure the DI output is connected to your mixer/interface and powered (phantom power or DC adapter).
- ఉపయోగించండి SPKR SIM switch to select the desired speaker simulation:
- ఆఫ్: No speaker simulation applied.
- GTR: Optimized for electric guitar tones.
- బాస్: Optimized for bass guitar tones.
- సర్దుబాటు చేయండి అవుట్ లెవెల్ knob to control the output volume of the DI signal. Start with a low level and gradually increase to avoid clipping.
- If you experience hum or buzzing, try flipping the GND లిఫ్ట్ మారండి.
- ది దశ switch (0°/180°) allows you to invert the phase of the DI signal, which can be useful for correcting phase issues when combining with other signals (e.g., a miked cabinet).
5.3 Using the Line Output
ది LINE (DRY) output provides a direct, unprocessed signal from your amplifier's output, after the load box. This is ideal for re-amping, where you record the dry signal and then send it back through an amplifier or software simulations later. The output level is controlled by the అవుట్ లెవెల్ నాబ్.
6. నిర్వహణ
- శుభ్రపరచడం: యూనిట్ వెలుపలి భాగాన్ని శుభ్రం చేయడానికి మృదువైన, పొడి వస్త్రాన్ని ఉపయోగించండి. రాపిడి క్లీనర్లు లేదా ద్రావకాలను ఉపయోగించవద్దు.
- వెంటిలేషన్: Ensure the ventilation slots are clear of dust and debris to prevent overheating. Periodically check and clean if necessary.
- నిల్వ: ఉపయోగంలో లేనప్పుడు ప్రత్యక్ష సూర్యకాంతి మరియు తీవ్రమైన ఉష్ణోగ్రతలకు దూరంగా పొడి, చల్లని ప్రదేశంలో యూనిట్ను నిల్వ చేయండి.
- కేబుల్ తనిఖీ: Regularly inspect all cables for signs of wear or damage. Replace damaged cables immediately.
7. ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| No sound from DI output. | No phantom power or DC adapter connected; incorrect cable; OUT LEVEL too low. | Ensure 48V phantom power is active on your mixer/interface or connect a 9-24VDC power supply. Check XLR cable connection. Increase OUT LEVEL knob. |
| Hum or buzzing from DI output. | గ్రౌండ్ లూప్. | పాల్గొనండి GND లిఫ్ట్ switch on the front panel. Ensure all equipment is properly grounded. |
| Distorted sound from DI output. | OUT LEVEL too high; amplifier output too high. | తగ్గించండి అవుట్ లెవెల్ knob. Ensure your amplifier's output is not excessively high, causing clipping at the Captor's input. |
| Amplifier sounds bad or damaged. | Incorrect impedance match; no load connected; amplifier power exceeds 100W. | మీ నిర్ధారించుకోండి amplifier's speaker output impedance (e.g., 4 ohms) matches the Captor 4. Always connect the స్పీకర్ ఇన్. Do not use with amplifiers exceeding 100 Watts RMS. |
8. స్పెసిఫికేషన్లు
- మోడల్: Torpedo Captor 4
- లోడ్ ఇంపెడెన్స్: ౪౦ ఓం
- గరిష్టం Ampజీవిత శక్తి: 100 వాట్స్ ఆర్ఎంఎస్
- అటెన్యుయేటర్: -20dB
- ఇన్పుట్లు: 1 x 1/4" TS Speaker In
- అవుట్పుట్లు: 1 x 1/4" TS Speaker Out (Thru), 1 x 1/4" TS Speaker Out (-20dB Attenuation), 1 x XLR DI Out, 1 x 1/4" TRS Line Out (Dry)
- DI Output Power: 48V Phantom Power or 9-24VDC (5mA)
- Speaker Simulation: Analog (Guitar, Bass)
- దశ స్విచ్: 0°/180°
- గ్రౌండ్ లిఫ్ట్: అవును
- కొలతలు: 8.85 x 6.6 x 3.95 అంగుళాలు (22.5 x 16.8 x 10 సెం.మీ.)
- బరువు: 2.95 పౌండ్లు (1.34 కిలోలు)
- రంగు: నలుపు
9. వారంటీ మరియు మద్దతు
For warranty information and technical support, please refer to the official Two Notes Audio Engineering webసైట్లో లేదా మీ అధీకృత డీలర్ను సంప్రదించండి. ఏవైనా వారంటీ క్లెయిమ్ల కోసం మీ కొనుగోలు రుజువును ఉంచండి.
ఆన్లైన్ వనరులు: Visit the Two Notes website for the latest firmware updates, software, and additional documentation.
