VOLTCRAFT PPS-13610 Laboratory Power Supply User Manual

1. పరిచయం

This manual provides comprehensive instructions for the safe and efficient operation of your VOLTCRAFT PPS-13610 Laboratory Power Supply. This device is designed as a potential-free DC voltage source for various laboratory and educational applications. It features adjustable voltage and current outputs, programmable memory locations, and remote control capabilities via USB.

పరికరాన్ని ఆపరేట్ చేసే ముందు దయచేసి ఈ మాన్యువల్‌ని పూర్తిగా చదవండి మరియు భవిష్యత్తు సూచన కోసం దాన్ని ఉంచండి.

2. భద్రతా సూచనలు

• Always operate the power supply indoors in a dry, well-ventilated area.
• Ensure the power supply is connected to a properly grounded electrical outlet.
• పరికరాన్ని తేమ, వర్షం లేదా తీవ్రమైన ఉష్ణోగ్రతలకు గురిచేయవద్దు.
• వేడెక్కడాన్ని నివారించడానికి వెంటిలేషన్ ఓపెనింగ్‌లను నిరోధించడాన్ని నివారించండి.
• సి ని తెరవడానికి ప్రయత్నించవద్దుasing or modify the device. Refer all servicing to qualified personnel.
• Before making any connections or disconnections, ensure the power supply is turned off.
• Use appropriate safety connectors and cables for all connections.
• Be aware of the maximum current ratings for the front (5A) and rear (20A) output terminals.

3. ఉత్పత్తి ముగిసిందిview

The VOLTCRAFT PPS-13610 features a clear digital display and intuitive controls for precise voltage and current adjustments. Below are descriptions of the front and rear panels.

3.1 ఫ్రంట్ ప్యానెల్

చిత్రం: ముందు భాగం view of the VOLTCRAFT PPS-13610 power supply, showing the digital display, voltage and current adjustment knobs, power switch, and auxiliary output terminals.

• డిజిటల్ ప్రదర్శన: రియల్-టైమ్ వాల్యూమ్‌ను చూపుతుందిtage (V) and current (A) output, along with C.V. (Constant Voltage) and C.C. (Constant Current) indicators.
• వాల్యూమ్tage సర్దుబాటు నాబ్: అవుట్‌పుట్ వాల్యూమ్‌ను సెట్ చేయడానికి ఉపయోగించబడుతుందిtage. Features both fine and coarse adjustment.
• Current Adjustment Knob: Used to set the maximum allowable output current. Features both fine and coarse adjustment.
• పవర్ స్విచ్: యూనిట్ కోసం ప్రధాన విద్యుత్ నియంత్రణ.
• Auxiliary Output (5A Max): Front terminals for connecting loads requiring up to 5 Amperes. These are 4 mm safety connectors.
• Rear Control Indicator: Illuminates when the unit is being controlled remotely.

3.2 వెనుక ప్యానెల్

చిత్రం: వెనుక view of the VOLTCRAFT PPS-13610 power supply, showing the main output terminals, cooling fan, power input, USB port, and remote control port.

• ప్రధాన అవుట్పుట్: Clamp connections for high current applications, supporting the full rated current (up to 20A).
• కూలింగ్ ఫ్యాన్: Ensures proper thermal management of the unit.
• AC పవర్ ఇన్పుట్: Standard IEC C14 inlet for connecting the main power cable.
• USB పోర్ట్: For connecting to a computer for remote control and programming.
• రిమోట్ కంట్రోల్ పోర్ట్: For external remote control connections.
• మోడ్ స్విచ్: Selects between Normal, Preset, and Remote Control modes.
• Recall Buttons (P1, P2, P3): For recalling saved voltagఇ మరియు ప్రస్తుత సెట్టింగ్‌లు.

4. సెటప్

1. అన్‌ప్యాకింగ్: Carefully remove the power supply from its packaging. Inspect for any signs of damage. Retain packaging for future transport or storage.
2. ప్లేస్‌మెంట్: Place the unit on a stable, level surface. Ensure adequate clearance around the cooling fan and ventilation openings for proper airflow. Avoid direct sunlight, heat sources, and areas with excessive dust or humidity.
3. పవర్ కనెక్షన్:
   • Ensure the power switch on the front panel is in the 'OFF' (O) position.
   • Connect the provided AC power cord to the AC Power Input on the rear panel and then to a suitable grounded electrical outlet (100-240V~, 50/60Hz).
4. అవుట్‌పుట్ కనెక్షన్‌లు:
   • For loads requiring up to 5A, use the 4mm safety connectors on the front panel.
   • For loads requiring higher currents (up to 20A), use the clamp connections on the rear panel. Ensure connections are secure.
   • Always observe correct polarity (+ to + and - to -) when connecting your load.

5. ఆపరేటింగ్ సూచనలు

5.1 ప్రాథమిక ఆపరేషన్

1. పవర్ ఆన్: Flip the power switch on the front panel to the 'ON' (I) position. The digital display will illuminate.
2. సెట్టింగ్ వాల్యూమ్tage:
   • తిప్పండి వాల్యూమ్tagఇ సర్దుబాటు నాబ్ to set the desired output voltage.
   • Push the knob for fine adjustment, or rotate without pushing for coarse adjustment.
3. Setting Current Limit:
   • తిప్పండి ప్రస్తుత సర్దుబాటు నాబ్ to set the maximum allowable output current. This acts as a current limit.
   • Push the knob for fine adjustment, or rotate without pushing for coarse adjustment.
   • The current limit can be preset without a short circuit bridge.
4. కనెక్ట్ లోడ్: After setting the desired voltage and current limit, connect your load to the appropriate output terminals (front or rear).
5. పర్యవేక్షణ అవుట్‌పుట్: The digital display shows the actual output voltagఇ మరియు ప్రస్తుత.
   • ది CV సూచిక illuminates when the power supply is operating in Constant Voltage mode (output voltage is stable at the set value).
   • ది CC సూచిక illuminates when the power supply is operating in Constant Current mode (output current is stable at the set limit, typically when the load resistance is too low for the set voltagమరియు).
6. పవర్ ఆఫ్: Disconnect the load, then flip the power switch to the 'OFF' (O) position.

5.2 Using Preset Memory Locations

The PPS-13610 allows you to save and recall three different voltage and current limit settings.

1. కావలసిన వాల్యూమ్‌ను సెట్ చేయండిtage and current limit using the respective adjustment knobs.
2. To save, refer to the specific instructions in the full product manual (not provided in detail here).
3. To recall a saved setting, use the P1, P2, or P3 buttons on the rear panel (ensure the Mode switch is set to 'Preset').

6. Remote Control and Programmable Features

The power supply can be controlled remotely via a USB connection to a computer, enabling advanced programmable functions.

1. USB కనెక్షన్: Connect the power supply to your computer using a standard USB cable via the USB port on the rear panel.
2. సాఫ్ట్‌వేర్ ఇన్‌స్టాలేషన్: Install the included software on your computer. Refer to the software's documentation for installation and usage instructions.
3. మోడ్ ఎంపిక: Set the 'Mode' switch on the rear panel to 'Remote Ctrl' for computer control. The 'Rear Control' indicator on the front panel will illuminate.
4. Cyclic Workflows: The software allows you to program up to 20 different voltage and current sets with varying time periods. These workflows can be repeated up to 999 times, ideal for automated testing and experimental setups.

7. నిర్వహణ

• శుభ్రపరచడం: Disconnect the power supply from the mains before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
• వెంటిలేషన్: Regularly check that the cooling fan and ventilation openings are free from dust and obstructions.
• ఫ్యూజ్ ప్రత్యామ్నాయం: If the unit fails to power on, the fuse may need replacement.
  • Ensure the power supply is completely disconnected from the mains.
  • Locate the fuse holder near the AC power input on the rear panel.
  • Replace the fuse with one of the same type and rating: T6AL250V.

8. ట్రబుల్షూటింగ్

9. స్పెసిఫికేషన్లు

10. వారంటీ మరియు మద్దతు

For warranty information and technical support, please refer to the documentation provided with your purchase or contact VOLTCRAFT customer service directly. Details can typically be found on the manufacturer's official webసైట్ లేదా మీ కొనుగోలు కేంద్రం ద్వారా.

తయారీదారు: వోల్ట్రాఫ్ట్