Chief TS325TU Medium THINSTALL Dual Swing Arm Wall Display Mount

పరిచయం

The Chief TS325TU Medium THINSTALL Dual Swing Arm Wall Display Mount is designed to provide a secure and versatile mounting solution for flat panel displays ranging from 30 to 52 inches. This mount offers an ultra-low profile when collapsed and extends up to 25 inches, allowing for optimal viewing angles with its Centris low-profile tilt and Centerless lateral shift capabilities. It features integrated cable management for a clean installation.

భద్రతా సమాచారం

హెచ్చరిక: Failure to read, understand, and follow all instructions can result in serious personal injury, property damage, or voiding of product warranty. If you have any questions, contact Chief customer service or a qualified installer.

• గరిష్ట లోడ్ సామర్థ్యాన్ని మించకూడదు 75.00 పౌండ్లు (34 కిలోలు).
• మౌంట్ మరియు డిస్ప్లే యొక్క మిశ్రమ బరువును మౌంటు ఉపరితలం సురక్షితంగా సమర్ధించగలదని నిర్ధారించుకోండి.
• Always mount to structural studs or appropriate wall anchors. Note that this mount is designed for studs approximately 16 inches apart.
• Use appropriate tools and follow all local building codes.
• ఇన్‌స్టాలేషన్ సమయంలో పిల్లలు మరియు పెంపుడు జంతువులను దూరంగా ఉంచండి.

ప్యాకేజీ విషయాలు

ఇన్‌స్టాలేషన్ ప్రారంభించే ముందు అన్ని భాగాలు ఉన్నాయని నిర్ధారించుకోండి:

• 1 x Main Assembly
• 1 x Wall Rail
• 1 x Right Upright
• 1 x Left Upright
• 1 x Top Interface Support
• 1 x Bottom Interface Support
• 2 x Wall Rail Cover
• 1 x Lag Screw Cover
• 1 x Bumper
• 1 x Latch Spacer
• 2 x Long Adhesive
• 4 x Short Adhesive
• Mounting Hardware (various screws, washers, spacers)

సెటప్ మరియు ఇన్‌స్టాలేషన్

Proper installation is critical for the safety and performance of your display mount. It is recommended to have at least two people for installation due to the weight and size of the mount.

అవసరమైన సాధనాలు (చేర్చబడలేదు):

• స్టడ్ ఫైండర్
• తగిన డ్రిల్ బిట్లతో డ్రిల్ చేయండి
• స్థాయి
• టేప్ కొలత
• Socket Wrench / Ratchet
• ఫిలిప్స్ హెడ్ స్క్రూడ్రైవర్
• పెన్సిల్

దశల వారీ సంస్థాపన:

1. గోడను సిద్ధం చేయండి:

   Locate and mark the center of two adjacent wall studs. This mount is designed for standard 16-inch stud spacing. Ensure there are no electrical wires or plumbing in the drilling path. It is highly recommended to plan your entire layout, including TV, speakers, and wiring, before drilling.

2. Attach Wall Rail:

   Position the Wall Rail on the marked studs, ensuring it is level. Mark the pilot hole locations. Drill pilot holes into the studs. Secure the Wall Rail to the wall using the provided lag screws. Ensure the screws are tightened securely but do not overtighten to avoid stripping.

   

   Image: Main assembly of the Chief TS325TU mount, showing the wall plate, articulating arms, and display interface.

3. Assemble Display Interface:

   Attach the Right and Left Uprights to the back of your display using the appropriate screws, washers, and spacers from the mounting hardware kit. Ensure the uprights are centered and level on the display. Then, attach the Top and Bottom Interface Supports to the uprights.

4. Mount Display to Wall Rail:

   Carefully lift the display with the attached interface and hook it onto the Wall Rail. The design allows for post-installation lateral shift of up to 16 inches (406 mm) for limitless centering capability. Secure the display to the mount according to the specific instructions in the detailed manual (refer to manufacturer's full manual for precise steps).

   

   చిత్రం: వైపు view of the Chief TS325TU mount, illustrating its compact profile when retracted and the extension capability.

5. కేబుల్ నిర్వహణ:

   Utilize the enclosed, tool-free cable covers and the wide open wall plate to route power and signal cables. This helps maintain a clean and organized appearance.

మౌంట్‌ను ఆపరేట్ చేయడం

The Chief TS325TU mount offers flexible positioning for your display:

• పొడిగింపు: The mount extends up to 25 inches (635 mm) from the wall, maximizing viewing potential from various positions in the room.
• వంపు: The Centris low-profile tilt mechanism allows for up to 15 degrees of effortless fingertip tilt. This enables you to achieve optimal viewకోణాలను సర్దుబాటు చేయండి మరియు కాంతిని తగ్గించండి.
• Swivel/Pan: The dual swing arms allow for significant swivel capabilities, enabling you to turn the display left or right to suit your viewఅవసరాలు.
• Lateral Shift: After installation, the display can be shifted laterally along the wall plate by up to 16 inches (406 mm) to fine-tune its horizontal position without re-drilling.

చిత్రం: కోణీయ view of the Chief TS325TU mount, highlighting its robust construction and articulating design.

నిర్వహణ

Regular maintenance ensures the longevity and safe operation of your mount:

• శుభ్రపరచడం: Dust the mount regularly with a soft, dry cloth. For stubborn marks, use a slightly damp cloth with mild soap, then wipe dry. Avoid abrasive cleaners or solvents.
• కనెక్షన్‌లను తనిఖీ చేయండి: Periodically check all screws and bolts to ensure they remain tight. Do not overtighten.
• కదలిక తనిఖీ: Occasionally extend, retract, tilt, and swivel the mount to ensure smooth operation. If movement becomes stiff, consult the troubleshooting section or contact support.

ట్రబుల్షూటింగ్

For complex issues or if you are unsure about any step, please contact Chief customer support or a certified installer.

స్పెసిఫికేషన్లు

వారంటీ మరియు మద్దతు

For detailed warranty information, please refer to the official Chief Manufacturing website or the documentation included with your product. Chief provides support for their products to ensure customer satisfaction.

If you require technical assistance, have questions about installation, or need to report a missing part, please visit the official Chief Manufacturing support page or contact their customer service directly. Contact information can typically be found on their webసైట్:

Visit Chief Manufacturing Webసైట్