సాల్టర్ ల్యాబ్స్ 350 Cc బబుల్ హ్యూమిడిఫైయర్ ఇన్‌స్ట్రక్షన్ మాన్యువల్

ఉత్పత్తి ముగిసిందిview

The Salter Labs 350 Cc Bubble Humidifier is designed to provide humidification for oxygen therapy. It features 360-degree rectangular diffuser ports for quiet operation and low system back pressure. The dome lid design ensures high performance and rugged durability. These disposable humidifiers are intended for single-patient use, offering dependable and cost-effective performance.

ముఖ్య లక్షణాలు:

• 360° molded, low resistance, high output diffuser head design
• Connecting tower design
• Large, quad wing nut connector
• Easy seal, translucent, double helix thread jar
• Jar permanently etched with large print minimum/maximum water level markings

Image: Salter Labs 350 Cc Bubble Humidifier, showing the assembled unit with its clear jar and black dome lid.

సెటప్ సూచనలు

అన్ప్యాక్ చేస్తోంది

Carefully remove the humidifier from its packaging. Inspect all components for any signs of damage. Do not use if any part is damaged.

హ్యూమిడిఫైయర్ నింపడం

1. Unscrew the dome lid from the clear jar by turning it counter-clockwise.
2. Fill the jar with distilled water up to the maximum fill line indicated on the jar. Do not overfill.
3. Re-attach the dome lid securely by turning it clockwise until a tight seal is achieved.

ఆపరేటింగ్ సూచనలు

Connecting to Oxygen Source

1. Connect the humidifier to your oxygen concentrator or flowmeter using the appropriate oxygen tubing.
2. Ensure all connections are secure to prevent any air or water leaks.

Monitoring Water Level

Regularly check the water level in the humidifier jar. Refill with distilled water as needed, ensuring it remains between the minimum and maximum fill lines to maintain proper humidification and prevent damage.

ఫ్లో రేట్ సర్దుబాటు

Adjust the oxygen flow rate according to your healthcare provider's instructions. The humidifier is designed for quiet operation with low system back pressure, ensuring efficient humidification at prescribed flow rates.

నిర్వహణ

రోజువారీ శుభ్రపరచడం

1. Disconnect the humidifier from the oxygen source.
2. Disassemble the lid and jar.
3. Wash both parts with warm, soapy water.
4. శుభ్రమైన నీటితో పూర్తిగా కడగాలి.
5. Allow to air dry completely before reassembly.

Disinfection (Weekly)

For weekly disinfection, soak the disassembled parts in a solution of one part white vinegar to three parts water for 30 minutes. Rinse thoroughly with sterile water and allow to air dry completely before reassembly.

ప్రత్యామ్నాయం

This is a disposable humidifier designed for single-patient use. Replace the humidifier according to your healthcare provider's recommendations or if it shows signs of wear or damage, such as cracks or persistent leaks.

ట్రబుల్షూటింగ్

No Bubbling or Low Humidification

• నీటి స్థాయిని తనిఖీ చేయండి: Ensure the water level is between the minimum and maximum fill lines.
• కనెక్షన్‌లను తనిఖీ చేయండి: Verify all tubing connections are secure and there are no leaks.
• Inspect Diffuser: Ensure the diffuser ports are not clogged. Clean if necessary following maintenance instructions.

మితిమీరిన శబ్దం

• నీటి స్థాయిని తనిఖీ చేయండి: Overfilling the jar can cause excessive noise. Adjust water level if needed.
• నష్టం కోసం తనిఖీ చేయండి: Check the lid and jar for cracks or damage that might affect the seal.

నీటి లీకేజీ

• Tighten Lid: Ensure the dome lid is securely tightened onto the jar.
• పగుళ్ల కోసం తనిఖీ చేయండి: Inspect the jar and lid for any cracks or damage. Replace the unit if damaged.

స్పెసిఫికేషన్లు

వారంటీ మరియు మద్దతు

For warranty information or technical support regarding your Salter Labs 350 Cc Bubble Humidifier, please contact Salter Labs directly. Refer to the product packaging or the official Salter Labs webఅత్యంత తాజా సంప్రదింపు వివరాలు మరియు వారంటీ నిబంధనల కోసం సైట్.

తయారీదారు: Salter Labs