Thermaltake CLP0600

Thermaltake Contac 21 Universal CPU Cooler

Model: CLP0600 Instruction Manual

1. ఉత్పత్తి ముగిసిందిview

The Thermaltake Contac 21 Universal CPU Cooler (CLP0600) is designed to provide efficient cooling for various CPU platforms. It features Direct-Touch Heat Transfer Technology with four 6mm copper heatpipes that make direct contact with the CPU, enhancing thermal transfer efficiency. The cooler includes one 92mm PWM fan and supports an additional 92mm fan for increased performance. It is compatible with Intel LGA-1366/1155/1156/775 and AMD FM1/AM3+/AM3/AM2+/AM2 sockets, supporting CPUs with a Thermal Design Power (TDP) up to 140W.

Thermaltake Contac 21 Universal CPU Cooler with 92mm fan

Figure 1: Thermaltake Contac 21 Universal CPU Cooler. This image shows the heatsink with its fins and heatpipes, and the attached 92mm PWM fan.

2. భద్రతా సమాచారం

  • ఇన్‌స్టాలేషన్ లేదా నిర్వహణకు ముందు మీ కంప్యూటర్ నుండి ఎల్లప్పుడూ పవర్‌ను డిస్‌కనెక్ట్ చేయండి.
  • Handle components with care to avoid damage. Sharp edges may be present on heatsink fins.
  • పిల్లలకు దూరంగా ఉంచండి.
  • మీ కంప్యూటర్ కేసు లోపల సరైన వెంటిలేషన్ ఉండేలా చూసుకోండి.
  • Do not operate the CPU without a properly installed cooler.

3. ప్యాకేజీ విషయాలు

ప్యాకేజీలో అన్ని అంశాలు ఉన్నాయని నిర్ధారించుకోండి:

  • Thermaltake Contac 21 Heatsink
  • 92mm PWM Fan (x1)
  • Fan Mounting Clips (for one or two fans)
  • Universal Mounting Kit (backplate, brackets, screws, spacers)
  • Thermal Grease (pre-applied or in a small tube)
  • వినియోగదారు మాన్యువల్ (ఈ పత్రం)

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

ముఖ్యమైన: Installation requires access to the rear of the motherboard. In some computer cases, the motherboard may need to be removed to install the backplate. Refer to your computer case manual for details on motherboard access.

సాధారణ ఇన్‌స్టాలేషన్ దశలు:

  1. CPU ని సిద్ధం చేయండి: Ensure the CPU socket is clean. If replacing an old cooler, carefully clean off any old thermal paste from the CPU surface using isopropyl alcohol.
  2. థర్మల్ గ్రీజును వర్తించండి: If thermal grease is not pre-applied to the cooler's base, apply a small, pea-sized amount to the center of the CPU's integrated heat spreader (IHS). Do not spread it manually; the pressure from the cooler will distribute it evenly.
  3. బ్యాక్‌ప్లేట్‌ను ఇన్‌స్టాల్ చేయండి: Position the universal backplate on the rear side of the motherboard, aligning the holes with the CPU socket mounting holes.
  4. మౌంటు బ్రాకెట్లను అటాచ్ చేయండి: On the front side of the motherboard, place the appropriate mounting brackets (Intel or AMD) over the CPU socket, aligning them with the backplate screws. Secure them loosely with the provided standoffs/screws.
  5. మౌంట్ హీట్‌సింక్: Carefully place the heatsink onto the CPU, ensuring the heatpipes make direct contact. Align the heatsink's mounting holes with the brackets.
  6. సెక్యూర్ హీట్‌సింక్: Using the provided screws, alternately tighten the screws in a diagonal pattern until the heatsink is firmly seated. అతిగా బిగించవద్దు. Ensure even pressure.
  7. ఫ్యాన్‌ను అటాచ్ చేయండి: Use the included fan clips to attach the 92mm PWM fan to the heatsink. Ensure the fan is oriented to blow air through the heatsink fins towards the rear or top of the case.
  8. ఫ్యాన్ కేబుల్ కనెక్ట్ చేయండి: Plug the 4-pin PWM fan connector into the CPU_FAN header on your motherboard.
  9. Optional Second Fan: If installing a second 92mm fan (not included), use the additional fan clips and connect it to an available fan header on your motherboard (e.g., CHA_FAN or SYS_FAN).

Platform-Specific Notes:

  • Intel LGA775/1156/1155/1366: Use the Intel-specific mounting brackets and hardware. Ensure the backplate is correctly oriented for your socket type.
  • AMD FM1/AM3+/AM3/AM2+/AM2: Use the AMD-specific mounting brackets and hardware. Some users have reported challenges with AMD instructions; proceed carefully, ensuring all components fit without excessive force. If issues arise, double-check component alignment and consult online resources for visual guides specific to your motherboard and CPU socket.

5. ఆపరేటింగ్ సూచనలు

Once installed, the Thermaltake Contac 21 operates automatically. The 92mm PWM fan's speed is controlled by your motherboard based on CPU temperature, ensuring optimal cooling performance while minimizing noise.

  • ప్రారంభ బూట్: After installation, power on your computer and enter the BIOS/UEFI settings. Verify that the CPU fan is detected and spinning. Monitor CPU temperatures during initial operation.
  • ఉష్ణోగ్రత పర్యవేక్షణ: Use motherboard monitoring software or third-party utilities to keep track of your CPU temperature, especially under load, to ensure the cooler is functioning effectively.
  • ఫ్యాన్ స్పీడ్ కంట్రోల్: Most motherboards allow customization of PWM fan curves in the BIOS/UEFI. You can adjust these settings to prioritize quieter operation or maximum cooling performance as desired.

6. నిర్వహణ

క్రమం తప్పకుండా నిర్వహణ మీ CPU కూలర్ యొక్క దీర్ఘాయువు మరియు సరైన పనితీరును నిర్ధారించడంలో సహాయపడుతుంది.

  • దుమ్ము తొలగింపు: Periodically (every 3-6 months, depending on environment) use compressed air to blow dust out of the heatsink fins and fan blades. Hold the fan blades gently to prevent over-spinning during cleaning, which can damage the fan motor.
  • ఫ్యాన్ తనిఖీ: Check the fan for any signs of wear, unusual noise, or obstructions. Ensure the fan cable is securely connected.
  • Thermal Grease: The thermal grease typically lasts for several years. If you notice a significant increase in CPU temperatures over time, consider reapplying fresh thermal grease. This requires removing the cooler, cleaning both surfaces, and applying new paste.

7. ట్రబుల్షూటింగ్

సమస్య సాధ్యమైన కారణం పరిష్కారం
అధిక CPU ఉష్ణోగ్రతలు
  • Improper thermal grease application
  • Loose heatsink mounting
  • Dust accumulation on heatsink/fan
  • ఫ్యాన్ తిరగడం లేదు లేదా చాలా నెమ్మదిగా తిరుగుతోంది
  • పేలవమైన కేసు గాలి ప్రవాహం
  • Reapply thermal grease
  • Re-seat and tighten heatsink
  • Clean heatsink and fan
  • Check fan connection to CPU_FAN header; adjust fan speed in BIOS
  • Improve case fan configuration
ఫ్యాన్ తిరగడం లేదు
  • ఫ్యాన్ కేబుల్ డిస్‌కనెక్ట్ చేయబడింది
  • తప్పు ఫ్యాన్
  • Incorrect BIOS settings
  • Ensure fan is securely plugged into CPU_FAN header
  • Test fan on another header or replace
  • Check BIOS for fan control settings
విపరీతమైన ఫ్యాన్ శబ్దం
  • దుమ్ము చేరడం
  • ఫ్యాన్ బేరింగ్ సమస్య
  • Fan running at maximum RPM
  • Clean fan blades and heatsink
  • Replace fan if bearing noise persists
  • Adjust fan curve in BIOS to lower RPM at idle/low load
Difficulty with Installation
  • Misalignment of mounting hardware
  • Incorrect bracket selection
  • Motherboard not removed for backplate access
  • Review installation steps carefully, especially for AMD platforms.
  • Ensure correct brackets are used for your CPU socket.
  • Remove motherboard if necessary to properly install backplate.
  • Do not force components; re-align if resistance is met.

8. స్పెసిఫికేషన్లు

ఫీచర్ స్పెసిఫికేషన్
మోడల్ సంఖ్య CLP0600
అనుకూలత Intel LGA775/1156/1155/1366, AMD FM1/AM3+/AM3/AM2+/AM2
టిడిపి మద్దతు 140W వరకు
Heatpipe Material Copper (4 x 6mm Direct-Touch)
ఫిన్ మెటీరియల్ అల్యూమినియం
అభిమాని కొలతలు 92 x 92 x 25 మిమీ
ఫ్యాన్ వేగం 1000 ~ 2400 RPM (PWM controlled)
శబ్దం స్థాయి 19.3 dBA (minimum)
పవర్ కనెక్టర్ X- పిన్ PWM
ఉత్పత్తి కొలతలు సుమారు 15.24 x 10.16 x 8.89 సెం.మీ (L x W x H)
బరువు సుమారు 453.59 గ్రా
UPC 841163043257

9. వారంటీ మరియు మద్దతు

Thermaltake products are manufactured to the highest quality standards. This product is covered by a limited warranty from the date of purchase. Please refer to the official Thermaltake webమీ ప్రాంతానికి సంబంధించిన వివరణాత్మక వారంటీ నిబంధనలు మరియు షరతుల కోసం సైట్‌ను చూడండి.

For technical support, troubleshooting assistance, or warranty claims, please visit the official Thermaltake support website or contact their customer service department. Have your product model number (CLP0600) and proof of purchase ready when contacting support.

అధికారిక Webసైట్: www.thermaltake.com

10. వీడియో వనరులు

No official product videos from the seller were available in the provided data for embedding. Please refer to the manufacturer's official website or YouTube channel for any available video guides or demonstrations.

సంబంధిత పత్రాలు - CLP0600

ముందుగాview థర్మాల్‌టేక్ CL-P001-AL12RE-A CPU కూలర్ ఇన్‌స్టాలేషన్ మాన్యువల్
Thermaltake CL-P001-AL12RE-A CPU కూలర్ కోసం వివరణాత్మక ఇన్‌స్టాలేషన్ గైడ్, Intel LGA మరియు AMD సాకెట్ల కోసం భాగాల జాబితా మరియు దశల వారీ సూచనలను కవర్ చేస్తుంది.
ముందుగాview Thermaltake Frio Silent 12 CPU Cooler Installation Manual
Official installation manual for the Thermaltake Frio Silent 12 CPU cooler, detailing step-by-step setup for AMD and Intel platforms. Includes parts list and mounting instructions.
ముందుగాview Thermaltake Water 3.0 Performer C Installation Guide
Installation guide for the Thermaltake Water 3.0 Performer C liquid CPU cooler, covering Intel and AMD platforms.
ముందుగాview థర్మాల్‌టేక్ ఫ్లో రైయింగ్ RGB 360 TT ప్రీమియం ఎడిషన్ ఇన్‌స్టాలేషన్ గైడ్
థర్మాల్‌టేక్ ఫ్లో రైయింగ్ RGB 360 TT ప్రీమియం ఎడిషన్ ఆల్-ఇన్-వన్ (AIO) CPU లిక్విడ్ కూలర్ కోసం వివరణాత్మక ఇన్‌స్టాలేషన్ సూచనలు, ఇంటెల్ మరియు AMD ప్లాట్‌ఫామ్‌ల కోసం విడిభాగాల జాబితా మరియు మౌంటు విధానాలను కవర్ చేస్తాయి.
ముందుగాview థర్మాల్‌టేక్ TH240 ARGB సింక్ CPU కూలర్ ఇన్‌స్టాలేషన్ గైడ్
Detailed installation instructions for the Thermaltake TH240 ARGB Sync All-in-One (AIO) liquid CPU cooler, covering parts list, Intel and AMD CPU socket installation, ARGB controller setup, and motherboard synchronization.
ముందుగాview థర్మాల్‌టేక్ NiC L32 CPU కూలర్ ఇన్‌స్టాలేషన్ మాన్యువల్
థర్మాల్‌టేక్ NiC L32 CPU కూలర్ కోసం అధికారిక ఇన్‌స్టాలేషన్ మాన్యువల్, ఇంటెల్ ప్లాట్‌ఫామ్‌ల కోసం దశల వారీ సూచనలను అందిస్తుంది.