Sunlite TL-L200

Sunlite TL-L200 Griplite Tail Light

ఇన్స్ట్రక్షన్ మాన్యువల్

పరిచయం

Thank you for choosing the Sunlite TL-L200 Griplite Tail Light. This manual provides essential information for the proper installation, operation, and maintenance of your new tail light. Designed for enhanced visibility and safety, this light features bright LEDs and a durable, water-resistant silicone body. Please read this manual thoroughly before use and retain it for future reference.

భద్రతా సమాచారం

ప్యాకేజీ విషయాలు

ప్యాకేజీలో అన్ని అంశాలు ఉన్నాయని నిర్ధారించుకోండి:

సెటప్

Battery Installation (If not pre-installed or for replacement)

  1. Gently open the silicone casinబ్యాటరీ కంపార్ట్‌మెంట్‌ని యాక్సెస్ చేయడానికి g.
  2. Insert two CR2032 lithium batteries, ensuring correct polarity (+/-).
  3. Close the silicone casing securely to maintain water resistance.

Mounting the Tail Light

The Sunlite Griplite Tail Light features an integrated silicone mounting strap for versatile attachment.

  1. Identify a suitable mounting location on your bicycle, such as the seat post, seat stay, or rear rack. Ensure the light will be visible from the rear.
  2. Wrap the integrated silicone strap around the desired mounting point.
  3. Hook the end of the strap onto the designated tab on the light's body, pulling it taut to secure the light firmly in place.
  4. Adjust the light's angle to ensure optimal visibility.
Sunlite TL-L200 Griplite Tail Light mounted on a bicycle seat post

Image: The Sunlite TL-L200 Griplite Tail Light securely mounted on a bicycle seat post, demonstrating its flexible silicone strap attachment.

ఆపరేటింగ్ సూచనలు

The Sunlite TL-L200 Griplite Tail Light operates with a simple one-button control located on the top of the light.

Sunlite TL-L200 Griplite Tail Light showing the power button

చిత్రం: ముందు భాగం view of the Sunlite TL-L200 Griplite Tail Light, highlighting the prominent power button on its top surface.

  1. పవర్ ఆన్/ఆఫ్: Press the button once to turn the light on. Press and hold the button for approximately 2 seconds to turn the light off.
  2. మోడ్‌లను మార్చండి: With the light on, press the button repeatedly to cycle through the available lighting modes:
    • స్థిరమైన మోడ్: Provides a continuous beam of red light for constant visibility.
    • ఫ్లాషింగ్ మోడ్: Emits a pulsating red light, designed to attract attention and enhance safety.
Sunlite TL-L200 Griplite Tail Light emitting red light in the dark

Image: The Sunlite TL-L200 Griplite Tail Light illuminated in a dark environment, demonstrating its bright red light output and visibility.

నిర్వహణ

క్లీనింగ్

To clean your tail light, wipe the silicone body and lens with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these may damage the material or lens.

బ్యాటరీ భర్తీ

When the light appears dim or stops functioning, it's time to replace the batteries. Refer to the "Battery Installation" section under "Setup" for detailed instructions. Always use two new CR2032 lithium batteries for optimal performance.

ట్రబుల్షూటింగ్

సమస్యసాధ్యమైన కారణంపరిష్కారం
లైట్ ఆన్ చేయదు.Dead batteries or incorrect battery installation.Replace batteries with new CR2032 cells, ensuring correct polarity.
కాంతి మసకగా ఉంది.తక్కువ బ్యాటరీ శక్తి.బ్యాటరీలను భర్తీ చేయండి.
కాంతి మినుకుమినుకుమంటుంది.Loose battery connection or low battery power.Check battery compartment for secure fit; replace batteries if necessary.
ప్రయాణిస్తున్నప్పుడు కాంతి ఆరిపోతుంది.సరికాని మౌంటు.Ensure the silicone strap is pulled taut and securely hooked onto the tab.

స్పెసిఫికేషన్లు

వారంటీ మరియు మద్దతు

Sunlite products are manufactured to high standards. For specific warranty information or technical support, please refer to the product packaging or visit the official Sunlite webసైట్. కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదుని ఉంచండి.

For further assistance, please contact Sunlite customer service through their official channels.

సంబంధిత పత్రాలు - TL-L200

ముందుగాview సన్‌లైట్ సీలింగ్ లైట్ ఇన్‌స్టాలేషన్ గైడ్
భద్రతా జాగ్రత్తలు, సాధారణ మార్గదర్శకాలు మరియు అసెంబ్లీ కోసం భాగాల జాబితాతో సహా సన్‌లైట్ సీలింగ్ లైట్ ఫిక్చర్‌ను ఇన్‌స్టాల్ చేయడానికి సూచనలు.
ముందుగాview సన్‌లైట్ LED T-గ్రిడ్ ఫిక్చర్ ఇన్‌స్టాలేషన్ గైడ్ | మోడల్ 88789-SU
సన్‌లైట్ LED T-గ్రిడ్ ఫిక్చర్ (మోడల్ 88789-SU) కోసం సమగ్ర ఇన్‌స్టాలేషన్ సూచనలు. మీ T-గ్రిడ్ లీనియర్ లైట్‌ను సురక్షితంగా ఇన్‌స్టాల్ చేయడం మరియు వైర్ చేయడం ఎలాగో తెలుసుకోండి.
ముందుగాview సన్‌లైట్ LED T8 ట్యూబులర్ Lamp రెట్రోఫిట్ ఇన్‌స్టాలేషన్ గైడ్
సన్‌లైట్ LED T8 ట్యూబులర్ l కోసం దశల వారీ ఇన్‌స్టాలేషన్ సూచనలుamp రెట్రోఫిట్. సింగిల్ మరియు బహుళ l కోసం భద్రతా హెచ్చరికలు, వైరింగ్ రేఖాచిత్రాలు ఉన్నాయి.ampలు, మరియు అవసరమైన సెటప్ సమాచారం.
ముందుగాview సన్‌లైట్ LED ప్యానెల్ లైట్ ఇన్‌స్టాలేషన్ సూచనలు
సన్‌లైట్ LED బ్యాక్-లిట్ ప్యానెల్ లే-ఇన్ ఫిక్చర్‌ల కోసం సమగ్ర ఇన్‌స్టాలేషన్ సూచనలు, కవరింగ్ సీలింగ్, సస్పెన్షన్ మరియు సర్ఫేస్ మౌంటింగ్ పద్ధతులు. వైరింగ్ మార్గదర్శకత్వం మరియు వాట్ సర్దుబాటు చేయడానికి సూచనలు ఉన్నాయి.tagఇ మరియు రంగు ఉష్ణోగ్రత.
ముందుగాview సన్‌లైట్ 55159 LED డిమ్మర్ స్విచ్ ఇన్‌స్టాలేషన్ సూచనలు
సన్‌లైట్ 55159 LED డిమ్మర్ స్విచ్ కోసం వివరణాత్మక ఇన్‌స్టాలేషన్ సూచనలు, 0-10V డిమ్మబుల్ పవర్ సప్లైలు మరియు లైటింగ్ ఫిక్చర్‌లకు అనుకూలంగా ఉంటాయి. హెచ్చరికలు, భాగాలు, సాధనాలు, సింగిల్-పోల్ మరియు 3-వే సెటప్‌ల కోసం వైరింగ్ రేఖాచిత్రాలు, ఇన్‌స్టాలేషన్ దశలు, పరీక్ష మరియు ట్రబుల్షూటింగ్ ఉన్నాయి.
ముందుగాview SP65BE SPI RGB+1CH PWM సింగిల్ కలర్ LED కంట్రోలర్ సూచనలు
Sunlite SP65BE SPI RGB+1CH PWM సింగిల్ కలర్ LED కంట్రోలర్ కోసం యూజర్ మాన్యువల్. ఫీచర్లు, Mi Home మరియు BanlanX తో యాప్ ఇంటిగ్రేషన్, 2.4G రిమోట్ కంట్రోల్, సాంకేతిక వివరణలు, ఇండికేటర్ లైట్లు మరియు వైరింగ్ సూచనలను కవర్ చేస్తుంది.