కోఅమ్‌టాక్ 674500

KOAMTAC KDC20/100/200 190mAh బ్యాటరీ యూజర్ మాన్యువల్

మోడల్: 674500

పరిచయం

This manual provides essential information for the proper use, maintenance, and troubleshooting of your KOAMTAC KDC20/100/200 190mAh replacement battery. This battery is designed to provide reliable power for your KDC20, KDC100, and KDC200 series devices. For optimal performance, it is recommended to replace your KDC battery annually.

భద్రతా సమాచారం

Please read and understand all safety precautions before using the battery. Improper handling can lead to damage, injury, or fire.

KDC20/100/200 190mAh battery installed in a device, showing a caution label for laser radiation.

Image: The KDC20/100/200 190mAh battery installed in a compatible device. Note the caution label on the device indicating "LASER RADIATION - DO NOT STARE INTO BEAM" for devices with laser components. This image highlights the proper placement of the battery within the device's battery compartment.

సెటప్: బ్యాటరీ ఇన్‌స్టాలేషన్

Follow these steps to properly install the 190mAh battery into your KDC20, KDC100, or KDC200 series device.

  1. Ensure your KDC device is powered off before beginning the installation.
  2. Locate the battery compartment on the back of your KDC device.
  3. If an old battery is present, carefully remove it.
  4. Align the new 190mAh battery with the battery compartment, ensuring the connector pins on the battery match the receptacle in the device.
  5. Gently push the battery into place until it is securely seated and the connector is fully engaged.
  6. Close the battery compartment cover, if applicable, ensuring it latches securely.
KOAMTAC KDC20/100/200 190mAh replacement battery with connector.

Image: The KOAMTAC KDC20/100/200 190mAh replacement battery. This image shows the compact blue battery pack with its small white connector and red and black wires, ready for installation into a compatible KDC device.

Operating: Charging and Usage

Once installed, the battery will power your KDC device. Follow these guidelines for charging and optimal usage.

బ్యాటరీని ఛార్జ్ చేస్తోంది

బ్యాటరీ వినియోగం

నిర్వహణ

Proper maintenance can extend the lifespan of your battery.

ట్రబుల్షూటింగ్

If you encounter issues with your battery, consider the following common solutions:

సమస్యసాధ్యమైన కారణంపరిష్కారం
Device does not power on after battery installation.Battery not properly seated or not charged.Ensure battery is fully inserted. Charge the device for at least 30 minutes.
బ్యాటరీ త్వరగా అయిపోతుంది.Aging battery, heavy device usage, or environmental factors.Reduce device usage intensity. Consider replacing the battery if it's old (recommended annually). Ensure device firmware is up to date.
బ్యాటరీ ఛార్జింగ్ లేదు.Faulty charger/cable, dirty contacts, or damaged battery.Try a different charger/cable. Clean battery and device contacts. If problem persists, the battery may need replacement.

If troubleshooting steps do not resolve the issue, please contact KOAMTAC customer support.

స్పెసిఫికేషన్లు

ఫీచర్వివరాలు
మోడల్ సంఖ్య674500
బ్యాటరీ కెపాసిటీ190 mAh
వాల్యూమ్tage3.7 వోల్ట్లు
బ్యాటరీ సెల్ కంపోజిషన్సీల్డ్ లీడ్ యాసిడ్
ఉత్పత్తి కొలతలు2 x 2 x 1 అంగుళాలు
వస్తువు బరువు8 ఔన్సులు
తయారీదారుకోమ్టాక్

వారంటీ సమాచారం

KOAMTAC provides a limited warranty for its products. For specific warranty terms and conditions applicable to the KDC20/100/200 190mAh battery, please refer to the official KOAMTAC webసైట్‌లో లేదా వారి కస్టమర్ సపోర్ట్‌ను నేరుగా సంప్రదించండి. వారంటీ క్లెయిమ్‌ల కోసం మీ కొనుగోలు రుజువును ఉంచండి.

కస్టమర్ మద్దతు

For further assistance, technical support, or inquiries regarding your KOAMTAC KDC20/100/200 190mAh battery, please contact KOAMTAC customer support through their official channels.

సంబంధిత పత్రాలు - 674500

ముందుగాview Interbuild Wood Panel Installation, Care, and Maintenance Guide
Comprehensive guide from Interbuild on how to properly store, install, care for, and maintain wood panels, butcher block countertops, desktops, and vanity tops. Includes essential information on acclimatization, oiling, expansion gaps, and repair.
ముందుగాview KOAMTAC KDC80 మినీ గైడ్: బ్లూటూత్ బార్‌కోడ్ స్కానర్ సెటప్ మరియు ఆపరేషన్
KOAMTAC KDC80 బ్లూటూత్ బార్‌కోడ్ స్కానర్‌ను సెటప్ చేయడానికి మరియు ఆపరేట్ చేయడానికి ఒక సంక్షిప్త గైడ్, పవర్ ఆన్/ఆఫ్, బ్లూటూత్ జత చేయడం, ప్రాథమిక ఆపరేషన్ మరియు సాంకేతిక వివరణలను కవర్ చేస్తుంది.
ముందుగాview KOAMTAC SKX7Pro SmartSled Mini Guide
A concise guide to the KOAMTAC SKX7Pro SmartSled, covering its features, basic operation, connectivity options, software integration, and available accessories. Learn how to power on/off, connect via USB, and utilize KTSync SKX and KOAMTACON software.
ముందుగాview KOAMTAC KDC200 త్వరిత గైడ్: సెటప్ మరియు వినియోగం
KOAMTAC KDC200 బ్లూటూత్ బార్‌కోడ్ స్కానర్‌ను సెటప్ చేయడానికి మరియు ఉపయోగించడానికి ఒక త్వరిత గైడ్, ఉత్పత్తి పరిచయం, బ్లూటూత్ జత చేయడం, వినియోగ మోడ్‌లు (HID కీబోర్డ్, Android/iOS కోసం KTSync) మరియు సాంకేతిక వివరణలను కవర్ చేస్తుంది.
ముందుగాview KOAMTAC KDC UHF Tag Read/Write Demo Guide
This guide provides detailed instructions for using the KOAMTAC KDC UHF device. Learn how to install the demo application, connect the KDC to smart devices via Bluetooth, read and write UHF tag data, manage tag security (lock/kill), configure UHF settings, and utilize the SDK API. It covers essential operations for efficient RFID tag నిర్వహణ.
ముందుగాview KOAMTAC KDC20 మినీ గైడ్: బ్లూటూత్ బార్‌కోడ్ స్కానర్ సెటప్ మరియు ఆపరేషన్
KOAMTAC KDC20 బ్లూటూత్ బార్‌కోడ్ స్కానర్‌కు సంక్షిప్త గైడ్, సెటప్, పవర్ ఆన్/ఆఫ్, ప్రాథమిక ఆపరేషన్, బ్లూటూత్ ప్రో గురించి వివరిస్తుంది.files, జత చేయడం, కీబోర్డ్ వెడ్జ్ కార్యాచరణ, KTSync, KOAMTACON, మరియు సాంకేతిక వివరణలు.