Eiko H1155 H11 Series Halogen Replacement Bulb Instruction Manual

పరిచయం

This manual provides essential instructions for the safe and effective installation, operation, and maintenance of your Eiko H1155 H11 Series Halogen Replacement Bulb. Please read this manual thoroughly before installation and retain it for future reference.

భద్రతా సమాచారం

• హెచ్చరిక: Always ensure the vehicle's ignition is off and the battery is disconnected before attempting any electrical work.
• జాగ్రత్త: హాలోజన్ బల్బులు అధిక ఉష్ణోగ్రతల వద్ద పనిచేస్తాయి. బల్బును ఉపయోగించే ముందు పూర్తిగా చల్లబరచండి.
• జాగ్రత్త: Avoid touching the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use clean gloves or a clean cloth.
• హెచ్చరిక: స్థానిక నిబంధనల ప్రకారం పాత బల్బులను బాధ్యతాయుతంగా పారవేయండి.

ఉత్పత్తి ముగిసిందిview

The Eiko H1155 is a high-performance H11 series halogen replacement bulb designed to meet or exceed original equipment specifications. It features a tungsten filament for bright, white light output.

మూర్తి 1: Eiko H1155 H11 Series Halogen Replacement Bulb. This image shows the clear glass bulb with its internal tungsten filament, mounted on a metal base with a red rubber seal and a black plastic connector.

సెటప్ మరియు ఇన్‌స్టాలేషన్

1. తయారీ: Ensure the vehicle is parked on a level surface, the engine is off, and the parking brake is engaged. Disconnect the negative terminal of the vehicle's battery to prevent accidental electrical shorts.
2. బల్బును యాక్సెస్ చేయండి: Locate the headlight assembly. Depending on your vehicle model, you may need to remove a cover, fender liner, or other components to access the rear of the headlight housing. Consult your vehicle's owner's manual for specific access instructions.
3. వైరింగ్‌ను డిస్‌కనెక్ట్ చేయండి: పాత బల్బ్ వెనుక నుండి ఎలక్ట్రికల్ కనెక్టర్‌ను జాగ్రత్తగా డిస్‌కనెక్ట్ చేయండి.
4. పాత బల్బును తీసివేయండి: Unclip or twist the retaining mechanism that holds the old bulb in place. Gently pull the old bulb straight out from the housing.
5. కొత్త బల్బును ఇన్‌స్టాల్ చేయండి: Wearing clean gloves or using a clean cloth, carefully insert the new Eiko H1155 bulb into the headlight housing. Ensure it is seated correctly and the retaining mechanism is secured. Do not touch the glass bulb with bare hands.
6. వైరింగ్‌ను తిరిగి కనెక్ట్ చేయండి: కొత్త బల్బుకు ఎలక్ట్రికల్ కనెక్టర్‌ను తిరిగి కనెక్ట్ చేయండి.
7. పరీక్ష కార్యాచరణ: Reconnect the vehicle's battery. Turn on the headlights to verify the new bulb is functioning correctly.
8. మళ్లీ కలపండి: Reinstall any covers or components that were removed to access the bulb.

గమనిక: It is recommended to replace both headlamps simultaneously for consistent light output and performance, as bulbs dim over time.

ఆపరేషన్

The Eiko H1155 Halogen Replacement Bulb operates as part of your vehicle's existing electrical system. Once properly installed, it will illuminate when the vehicle's headlight switch is activated. No special operational procedures are required beyond standard vehicle headlight usage.

నిర్వహణ

• శుభ్రపరచడం: If the headlight lens becomes dirty, clean it with a soft cloth and appropriate automotive cleaning solution. Avoid abrasive cleaners.
• తనిఖీ: Periodically check your headlights for proper function. If a bulb appears dim or has failed, replace it promptly.
• నిర్వహణ: When replacing bulbs, always handle them by the base to avoid contaminating the glass.

ట్రబుల్షూటింగ్

స్పెసిఫికేషన్లు

వారంటీ మరియు మద్దతు

For warranty information or technical support regarding your Eiko H1155 Halogen Replacement Bulb, please refer to the manufacturer's official website or contact Eiko customer service directly. Keep your purchase receipt as proof of purchase.

Manufacturer: EIkO Auto Lighting