పరిచయం
This manual provides detailed instructions for the installation, operation, and maintenance of your Wolo Apollo 8 GEN 3 LED Emergency Warning Light, Model 3095PPM-C. Please read this manual thoroughly before use to ensure proper function and safety.
The Wolo Apollo 8 GEN 3 LED Emergency Warning Light, Model 3095PPM-C, features a clear lens and a robust design for various mounting applications.
ముఖ్యమైన భద్రతా సూచనలు
- షార్ట్ సర్క్యూట్లను నివారించడానికి అన్ని విద్యుత్ కనెక్షన్లు సురక్షితంగా మరియు సరిగ్గా ఇన్సులేట్ చేయబడిందని నిర్ధారించుకోండి.
- Verify the vehicle's electrical system voltage matches the light's operating voltagఇ (12-60V DC).
- Disconnect the vehicle's battery before beginning installation to prevent electrical shock.
- Mount the light securely to prevent detachment during vehicle operation.
- Adhere to all local and national regulations regarding the use of emergency warning lights.
ప్యాకేజీ విషయాలు
- Wolo Apollo 8 GEN 3 LED Emergency Warning Light (Model 3095PPM-C)
- మౌంటింగ్ హార్డ్వేర్ (స్క్రూలు, నట్స్, వాషర్లు)
- వైర్ టెర్మినల్స్
- In-line Fuse Holder
- రబ్బరు రబ్బరు పట్టీ
- సూచనల మాన్యువల్ (ఈ పత్రం)
సెటప్ మరియు ఇన్స్టాలేషన్
The Apollo 8 warning light offers two primary mounting options: permanent surface mount or pipe mount.
Permanent Surface Mount
- Choose a flat, stable surface on your vehicle for mounting. Ensure the location provides clear 360° visibility.
- Use the provided rubber gasket as a template to mark the drilling locations for the mounting screws.
- గుర్తించబడిన ప్రదేశాలలో పైలట్ రంధ్రాలను వేయండి.
- Secure the light base to the surface using the provided mounting hardware (screws, washers, nuts). Ensure a tight fit to prevent vibration.
- Route the power wires to the vehicle's electrical system. Connect the positive wire (typically red) to a switched 12-60V DC power source via the in-line fuse holder. Connect the negative wire (typically black) to a suitable ground point on the vehicle chassis.
- Ensure all wire connections are secure and protected from moisture and abrasion.
పైప్ మౌంట్
- Identify a suitable pipe or pole for mounting. The light is designed to fit standard pipe sizes.
- Use the provided hardware to secure the light base to the pipe.
- Route the power wires and connect them as described in the Permanent Surface Mount section.
Note: Professional installation is recommended if you are unfamiliar with vehicle electrical systems.
ఆపరేటింగ్ సూచనలు
The Wolo Apollo 8 features eight (8) selectable warning light patterns.
- Once the light is powered on, it will activate in the last selected flash pattern.
- To change the flash pattern, momentarily press the pattern selection button (located on the unit or via a control wire).
- Each press of the button will cycle to the next available warning light pattern.
- Release the button when the desired pattern is displayed. The light will retain this pattern until changed again or power is disconnected.
నిర్వహణ
- శుభ్రపరచడం: Clean the clear polycarbonate lens periodically with a soft cloth and mild soap solution. Avoid abrasive cleaners or solvents that could damage the lens.
- లెన్స్ రీప్లేస్మెంట్: The lens is replaceable. If the lens becomes damaged, contact Wolo customer support for replacement parts and instructions.
- వైరింగ్ తనిఖీ: Periodically inspect all wiring and connections for signs of wear, corrosion, or damage. Ensure connections remain secure.
- The GEN 3 LEDs are designed for long life and are maintenance-free, requiring no bulb replacement.
ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| కాంతి ప్రకాశించదు | విద్యుత్ సరఫరా లేదు | Check power connections, fuse, and vehicle battery. Ensure the light is receiving 12-60V DC. |
| Light flashes erratically | Loose wiring connection or incorrect voltage | Inspect all wiring connections for tightness. Verify input voltage 12-60V DC పరిధిలో ఉంది. |
| Cannot change flash pattern | Faulty pattern selection button or control circuit | Ensure the button is functioning correctly. If the issue persists, contact customer support. |
| తగ్గిన కాంతి ఉత్పత్తి | డర్టీ లెన్స్ | Clean the lens with a soft cloth and mild soap solution. |
సాంకేతిక లక్షణాలు
- మోడల్: 3095PPM-C
- కాంతి మూలం: 20 x 1-watt GEN 3 LEDs
- ఆపరేటింగ్ వాల్యూమ్tage: 12 - 60 Volts DC
- Peak Current Draw: 1.37 Amps
- Light Patterns: 8 selectable patterns
- లెన్స్ మెటీరియల్: Polycarbonate Plastic (Clear)
- బేస్ మెటీరియల్: Aluminum (Painted Black)
- మౌంటు ఎంపికలు: Permanent Surface Mount, Pipe Mount
- ప్రత్యేక లక్షణాలు: Waterproof, Encapsulated Microprocessor, Reduced EMI
- కొలతలు: సుమారు 6.63 x 6.75 x 6.5 అంగుళాలు
- బరువు: సుమారు 1.85 పౌండ్లు
వారంటీ మరియు మద్దతు
Wolo products are designed for durability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Wolo webసైట్.
కస్టమర్ మద్దతు
For technical assistance, replacement parts, or warranty claims, please contact Wolo customer support.
వోలో మ్యానుఫ్యాక్చరింగ్ కార్పొరేషన్.
డీర్ పార్క్, NY 11729
