Eaton CS120LA

ఈటన్ CS120LA 20-Amp 120/277-వోల్ట్ కమర్షియల్ గ్రేడ్ సింగిల్ పోల్ కాంపాక్ట్ టోగుల్ స్విచ్ ఇన్‌స్ట్రక్షన్ మాన్యువల్

Model: CS120LA | Brand: Eaton

1. పరిచయం

This instruction manual provides essential information for the safe and proper installation, operation, and maintenance of your Eaton CS120LA 20-Amp 120/277-volt Commercial Grade Single Pole Compact Toggle Switch. Please read this manual thoroughly before beginning any work.

2. భద్రతా సమాచారం

హెచ్చరిక: Risk of electric shock. Improper installation can result in serious injury or death. Always turn off power at the circuit breaker or fuse box before wiring. Installation should be performed by a qualified electrician in accordance with all national and local electrical codes.

3. ఉత్పత్తి లక్షణాలు

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

Professional installation is recommended for this electrical device. Follow these general steps for installation:

  1. పవర్ ఆఫ్ చేయండి: Locate the circuit breaker or fuse that controls the power to the switch location and turn it OFF. Verify power is off using a voltagఇ టెస్టర్.
  2. పాత స్విచ్‌ను తీసివేయండి (వర్తిస్తే): Carefully remove the wall plate and unscrew the old switch from the electrical box. Disconnect the wires, noting their connections.
  3. వైర్లను సిద్ధం చేయండి: Strip approximately 1/2 inch of insulation from the ends of the circuit wires if necessary. Ensure wires are clean and free of damage.
  4. కొత్త స్విచ్ వైర్ చేయండి:
    • Connect the ground wire (bare copper or green) to the green ground screw terminal on the switch.
    • Connect the incoming hot wire to one of the brass side screw terminals.
    • Connect the outgoing load wire to the other brass side screw terminal.
    • Ensure all connections are tight and secure. The side wire terminals accept up to No. 10 solid or stranded wire.
  5. స్విచ్ మౌంట్ చేయండి: Carefully fold the wires into the electrical box and secure the switch to the box with the provided screws.
  6. వాల్ ప్లేట్‌ను ఇన్‌స్టాల్ చేయండి: Attach the decorative wall plate over the switch.
  7. శక్తిని పునరుద్ధరించండి: సర్క్యూట్ బ్రేకర్ లేదా ఫ్యూజ్ బాక్స్ వద్ద పవర్‌ను తిరిగి ఆన్ చేయండి.
  8. పరీక్ష ఆపరేషన్: Test the switch to ensure it functions correctly.
Eaton CS120LA Single Pole Toggle Switch with side wiring terminals visible

Image 1: Eaton CS120LA Toggle Switch showing the side wiring terminals and internal components. Note the "SPEC GRADE" marking and the "OFF" position of the toggle.

5. ఆపరేటింగ్ సూచనలు

The Eaton CS120LA is a single-pole toggle switch designed for simple ON/OFF control of a lighting fixture or other electrical load from a single location.

6. నిర్వహణ

The Eaton CS120LA switch requires minimal maintenance. Ensure the switch and wall plate are kept clean and free of dust. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.

7. ట్రబుల్షూటింగ్

If the switch is not functioning as expected, consider the following common issues:

ట్రబుల్షూటింగ్ దశలు సమస్యను పరిష్కరించకపోతే, అర్హత కలిగిన ఎలక్ట్రీషియన్‌ను సంప్రదించండి.

8. స్పెసిఫికేషన్లు

ఫీచర్స్పెసిఫికేషన్
బ్రాండ్ఈటన్
మోడల్ సంఖ్యCS120LA
మౌంటు రకంవాల్ మౌంట్
వాల్యూమ్tage120/277 వోల్ట్‌ల AC
ప్రస్తుత రేటింగ్20 Amps
ఆపరేషన్ మోడ్ఆఫ్
స్విచ్ రకంSingle Pole Toggle
సంప్రదింపు మెటీరియల్ఇత్తడి
వైర్ అనుకూలతUp to No. 10 solid or stranded wire
ఉత్పత్తి కొలతలు1.64 x 1.64 x 1.64 అంగుళాలు
వస్తువు బరువు2.39 ఔన్సులు
రంగులేత బాదం

9. వారంటీ మరియు మద్దతు

The Eaton CS120LA Commercial Grade Single Pole Compact Toggle Switch comes with a 10-సంవత్సరం పరిమిత వారంటీ that protects against defects in material and workmanship. For warranty claims or technical support, please contact Eaton customer service directly or visit their official webసైట్. కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదుని ఉంచండి.

For further assistance, please refer to the official Eaton webసైట్ లేదా వారి కస్టమర్ సపోర్ట్‌ని సంప్రదించండి.

సంబంధిత పత్రాలు - CS120LA

ముందుగాview ఈటన్ ఆరో హార్ట్ ఇండస్ట్రియల్ గ్రేడ్ ప్లగ్స్ మరియు కనెక్టర్స్ కేటలాగ్
ఈటన్ ఆరో హార్ట్ ఇండస్ట్రియల్ గ్రేడ్ స్ట్రెయిట్ బ్లేడ్ ప్లగ్‌లు, కనెక్టర్లు, రిసెప్టకిల్స్, ఇన్‌లెట్‌లు మరియు అవుట్‌లెట్‌ల సమగ్ర కేటలాగ్. క్విక్ రిఫరెన్స్ గైడ్‌లు, NEMA కాన్ఫిగరేషన్‌లు మరియు వివరణాత్మక స్పెసిఫికేషన్‌లను కలిగి ఉంటుంది.
ముందుగాview ఈటన్ ఎకనోస్విచ్ సీల్డ్ టోగుల్ స్విచ్‌ల సిరీస్ 8530, 8531, 8532 డేటాషీట్
ఈటన్ యొక్క ఎకనోస్విచ్ పర్యావరణపరంగా సీలు చేయబడిన టోగుల్ స్విచ్‌లు, సిరీస్ 8530, 8531, మరియు 8532 కోసం వివరణాత్మక సాంకేతిక వివరణలు, లక్షణాలు, ప్రస్తుత రేటింగ్‌లు మరియు మౌంటు కొలతలు. లివర్ ఎంపిక పట్టికలు మరియు టెర్మినల్ గుర్తింపును కలిగి ఉంటుంది.
ముందుగాview ఈటన్ ఏరోస్పేస్ మాస్టర్ టెక్నికల్ పబ్లికేషన్స్ ఇండెక్స్ జాబితా
ఈటన్ ఏరోస్పేస్ ఉత్పత్తుల కోసం సాంకేతిక ప్రచురణల సమగ్ర సూచిక, పార్ట్ నంబర్లు, మోడల్ నంబర్లు, డాక్యుమెంట్ రకాలు, ఇష్యూ తేదీలు, ఎయిర్‌క్రాఫ్ట్ ప్లాట్‌ఫారమ్‌లు మరియు తయారీ సైట్‌లను వివరిస్తుంది. ఈ జాబితా ఏరోస్పేస్ భాగాల నిర్వహణ మరియు సేవలకు కీలకమైన వనరుగా పనిచేస్తుంది.
ముందుగాview స్కాన్ట్రానిక్ PAN-200WE-KPZ విస్తరించదగిన 200-జోన్ కంట్రోల్ ప్యానెల్ డేటా షీట్
Technical data sheet for the Scantronic PAN-200WE-KPZ, an expandable 200-zone control panel with SecureConnect™ enabled, offering advanced features like decimal expansion, performance bus, and semi-auto addressing. Includes detailed product specifications and dimensions.
ముందుగాview Eaton Toggle Switches Catalog: Industrial, Military, High Capacity, and Lever Lock Series
Comprehensive catalog from Eaton Corporation detailing environmentally sealed toggle switches. Features Industrial, Econoswitch, Military (MIL-S-3950), High Capacity, and Lever Lock series with detailed specifications, current ratings, circuit diagrams, and mounting dimensions for models 8500-8505, 8510-8512, 8520-8522, 8526-8528, 8530-8538, 8566-8568, 8570-8575, and 8780-8782, 8790-8792.
ముందుగాview సమాంతర UPS వ్యవస్థలు: ఈటన్ యొక్క హాట్‌సింక్ టెక్నాలజీతో సామర్థ్యం మరియు పునరుక్తిని మెరుగుపరచడం
పెరిగిన సామర్థ్యం మరియు పునరుక్తి కోసం సమాంతర నిరంతరాయ విద్యుత్ సరఫరా (UPS) వ్యవస్థల ప్రయోజనాలు మరియు సాంకేతిక అంశాలను అన్వేషించండి. ఈ శ్వేతపత్రం ఈటన్ యొక్క వినూత్న హాట్‌సింక్ సమాంతర సాంకేతికతను వివరిస్తుంది, సాంప్రదాయ పద్ధతులతో దానిని విభేదిస్తుంది మరియు దాని ప్రయోజనాన్ని హైలైట్ చేస్తుంది.tagకీలకమైన విద్యుత్ అనువర్తనాల కోసం విశ్వసనీయత, నియంత్రణ, సమకాలీకరణ మరియు లోడ్ బ్యాలెన్సింగ్‌లో ఇవి ఉన్నాయి.