టెక్మార్ టూ ఎస్tagఇ సెట్‌పాయింట్ కంట్రోల్ 152 యూజర్ మాన్యువల్

పరిచయం

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Tekmar Two Stage Setpoint Control 152. This microprocessor-based control is designed to function either as a two-stage setpoint control or as two independent setpoint controls. It supports two-stagఇ తాపన, రెండు-లుtage cooling, or a combined heating/cooling interlock function. When configured for independent operation, it can manage any combination of heating or cooling devices. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance.

భద్రతా సమాచారం

హెచ్చరిక: సరికాని సంస్థాపన, సర్దుబాటు, మార్పు, సేవ లేదా నిర్వహణ ఆస్తి నష్టం, గాయం లేదా మరణానికి కారణం కావచ్చు. ఈ పరికరాన్ని ఇన్‌స్టాల్ చేయడానికి లేదా సర్వీసింగ్ చేయడానికి ముందు ఇన్‌స్టాలేషన్ మరియు ఆపరేటింగ్ సూచనలను పూర్తిగా చదవండి.

• All wiring must comply with local electrical codes and regulations.
• Disconnect power before performing any wiring or service.
• This control must be installed by a qualified technician.
• దెబ్బతిన్న వైరింగ్‌తో నియంత్రణను ఆపరేట్ చేయవద్దు.
• Ensure the control is protected from moisture and extreme temperatures.

ఉత్పత్తి ముగిసిందిview

The Tekmar 152 control features a digital display and intuitive buttons for setting parameters. It is designed for precise temperature management in HVAC systems.

మూర్తి 1: ముందు view of the Tekmar Two Stage Setpoint Control 152. This image shows the white rectangular control unit with a grey central panel. The panel includes a digital display at the top, three buttons below it labeled "Setpoint", "Differential", and "Delay", and two arrow buttons (up and down) for navigation. The Tekmar logo and model number "Two Stage Setpoint Control 152" are also visible.

ముఖ్య లక్షణాలు:

• పల్స్ వెడల్పు మాడ్యులేషన్ (PWM)
• రెండు-లుtage operation or independent heating/cooling control
• Control of up to two different setpoints (with additional sensor)
• Digital display for easy monitoring and adjustment

సెటప్ మరియు ఇన్‌స్టాలేషన్

Before beginning installation, ensure all power to the HVAC system is disconnected at the main breaker.

మౌంటు:

1. Select a suitable location for the control, away from direct sunlight, drafts, and heat sources.
2. Mount the control securely to a wall or electrical box using appropriate fasteners.

వైరింగ్:

Refer to the wiring diagram provided with the product packaging for specific connections. General steps include:

1. Connect the power supply wires to the designated terminals on the control.
2. Connect the sensor wires to the sensor input terminals.
3. Connect the output wires for heating/cooling stages to the appropriate terminals, ensuring correct polarity.
4. Double-check all connections for tightness and correct wiring before restoring power.

Note: Professional installation is recommended to ensure compliance with all electrical codes and optimal system performance.

ఆపరేటింగ్ సూచనలు

The Tekmar 152 control is operated using the three main buttons and the up/down arrow buttons on the front panel.

Setting the Setpoint:

1. Press the "Setpoint" button. The current setpoint value will flash on the digital display.
2. Use the "Up" or "Down" arrow buttons to adjust the setpoint to the desired temperature or value.
3. Press the "Setpoint" button again to confirm and save the new setting, or wait a few seconds for it to save automatically.

Adjusting Differential:

The differential setting determines the temperature band around the setpoint before the control activates or deactivates a stage.

1. Press the "Differential" button. The current differential value will flash.
2. Use the "Up" or "Down" arrow buttons to adjust the differential.
3. Press the "Differential" button again to confirm.

Configuring Delay:

The delay setting prevents rapid cycling of equipment, extending its lifespan.

1. Press the "Delay" button. The current delay value will flash.
2. Use the "Up" or "Down" arrow buttons to adjust the delay time.
3. Press the "Delay" button again to confirm.

రెండు-ఎస్tage vs. Independent Control:

The operating mode (two-stage or independent) is typically configured during initial setup by a qualified technician. Consult your installer or the full technical manual for details on changing this mode.

నిర్వహణ

The Tekmar 152 control requires minimal maintenance.

• శుభ్రపరచడం: Periodically wipe the control's exterior with a soft, damp గుడ్డ. రాపిడి క్లీనర్లు లేదా ద్రావకాలు ఉపయోగించవద్దు.
• తనిఖీ: Annually inspect wiring connections for any signs of wear or looseness. Ensure the control is free from dust and debris.
• సెన్సార్ తనిఖీ: If temperature readings appear inaccurate, check the sensor and its wiring for damage.

Note: For any internal maintenance or repairs, contact a qualified service technician.

ట్రబుల్షూటింగ్

If the problem persists after attempting these solutions, contact a qualified HVAC technician or Tekmar customer support.

స్పెసిఫికేషన్లు

• మోడల్: 152
• బ్రాండ్: టేక్మార్
• నియంత్రణ రకం: ఇద్దరు ఎస్tage Setpoint Control
• విద్యుత్ సరఫరా: Refer to product label for specific power requirements.
• ప్రదర్శన: డిజిటల్ ఎల్‌సిడి
• నియంత్రణ పద్ధతి: రిమోట్
• ఫీచర్లు: Pulse Width Modulation, 2 Stage operation or heat & cool control, Control of up to 2 different setpoints (with additional sensor)
• వస్తువు బరువు: దాదాపు 12 ఔన్సులు (0.34 కిలోలు)
• UPC: 782301923430

వారంటీ మరియు మద్దతు

For warranty information, please refer to the documentation included with your product or visit the official Tekmar webసైట్.

For technical support or service inquiries, please contact Tekmar customer service. Contact details can typically be found on the manufacturer's webసైట్ లేదా ఉత్పత్తి ప్యాకేజింగ్.

Visit the official Tekmar Store on Amazon