Kuryakyn 3233 LED Trunk Accent Swoops Instruction Manual

1. ఉత్పత్తి ముగిసిందిview

The Kuryakyn 3233 LED Trunk Accent Swoops are designed to integrate seamlessly with your Honda Gold Wing GL1800, enhancing its rear lighting. These LED accents function as both running lights and turn signals, contributing to increased visibility and a refined aesthetic.

Figure 1: Kuryakyn 3233 LED Trunk Accent Swoops

2. ప్యాకేజీ విషయాలు

ఇన్‌స్టాలేషన్ ప్రారంభించే ముందు అన్ని భాగాలు ఉన్నాయని నిర్ధారించుకోండి:

• 1x Chrome Right Trunk Accent Swoop
• 1x Chrome Left Trunk Accent Swoop
• 1x “Y” Run-Brake Harness
• 1x Double “Y” Adapter
• 6x 4" Black Nylon Cable Ties
• 2x Alcohol Pads
• 1x Dielectric Grease Pack

గమనిక: Installation may require additional tools not included in this package, such as a set of metric hex wrenches, a rattail file, masking tape, and a non-permanent marker.

3. అనుకూలత

These LED Trunk Accent Swoops are compatible with Honda Gold Wing GL1800 models from 2006 to 2017, with the exception of F6B models. Some installations may require a separate rear accessory light adapter (not included).

4. ఇన్‌స్టాలేషన్ సూచనలు

Before starting, ensure the motorcycle's ignition is off and the battery is disconnected to prevent electrical shorts. Always refer to your motorcycle's service manual for specific panel removal and wiring diagrams.

దశల వారీ గైడ్

1. ఇన్‌స్టాలేషన్ ప్రాంతాన్ని సిద్ధం చేయండి: Carefully remove any necessary panels or existing lighting components from the motorcycle's trunk area to access the wiring and mounting points.
2. వైరింగ్ హార్నెస్‌ను కనెక్ట్ చేయండి: Utilize the provided “Y” Run-Brake Harness and Double “Y” Adapter to connect the LED Trunk Accent Swoops to the motorcycle's existing wiring. Ensure all connections are secure and properly insulated, using dielectric grease as needed.
3. పరీక్ష కార్యాచరణ: Before final assembly, temporarily reconnect the battery and test the running light and turn signal functions of the newly connected accent swoops. Verify that all LEDs illuminate correctly and respond to turn signal inputs.
4. Secure the Accent Swoops: Carefully position the LED Trunk Accent Swoops onto the motorcycle's trunk. Secure them using appropriate fasteners or adhesive as per the product design. Ensure a snug fit and proper alignment.
5. చివరి అసెంబ్లీ: Reinstall any panels or components that were removed during the initial preparation. Ensure all screws and fasteners are tightened to the manufacturer's specifications.

Figure 2: Installed LED Trunk Accent Swoops (Close-up)

చిత్రం 3: వెనుక View with Illuminated Accent Swoops

5. ఆపరేషన్

Once installed, the Kuryakyn 3233 LED Trunk Accent Swoops will operate in conjunction with your motorcycle's existing lighting system. They are designed to function as:

• రన్నింగ్ లైట్లు: Providing continuous illumination when the motorcycle's lights are on.
• టర్న్ సిగ్నల్స్: Flashing in sync with your motorcycle's turn signals to indicate directional changes.

6. నిర్వహణ

To ensure the longevity and optimal performance of your LED Trunk Accent Swoops, follow these maintenance guidelines:

• శుభ్రపరచడం: Clean the accent swoops regularly with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals that could damage the chrome finish or LED lenses.
• తనిఖీ: Periodically inspect the wiring connections for any signs of wear, corrosion, or looseness. Ensure the accent swoops remain securely mounted.
• వాటర్ఫ్రూఫింగ్: The product is designed to be waterproof. However, avoid directing high-pressure water sprays directly at the LED units or wiring connections during washing.

7. ట్రబుల్షూటింగ్

If you experience issues with your Kuryakyn 3233 LED Trunk Accent Swoops, consider the following:

• వెలుతురు లేని లైట్లు: Check all electrical connections for proper seating and continuity. Verify that the motorcycle's fuses are intact. Ensure the battery is fully charged and properly connected.
• Incorrect Flashing (Turn Signals): If turn signals flash too quickly or too slowly, it may indicate an issue with the motorcycle's flasher relay or a load imbalance. Consult a qualified technician if this persists.
• Dim or Intermittent Lighting: Inspect wiring for damage or loose connections. Ensure no moisture has entered the electrical components.

For persistent issues, contact Kuryakyn customer support or a certified motorcycle technician.

8. స్పెసిఫికేషన్లు

9. వారంటీ మరియు మద్దతు

For information regarding product warranty, returns, or technical assistance, please contact Kuryakyn customer support directly. Details can typically be found on the official Kuryakyn webసైట్ లేదా మీ ఉత్పత్తి రిటైలర్ ద్వారా.