uxcell 1838 Infrared Remote Control Receiver Module Instruction Manual

1. పరిచయం

The uxcell 1838 Infrared Remote Control Receiver Module is a miniaturized component designed for receiving infrared signals. It facilitates infrared remote control functionality and infrared data transmission in various electronic applications. This module is suitable for integration into a wide range of devices, including AV equipment and home appliances.

2. ఉత్పత్తి లక్షణాలు

• ఉత్పత్తి పేరు: Infrared Remote Control Receiver Module
• మోడల్ సంఖ్య: 1838
• సరఫరా వాల్యూమ్tage: 2.7V నుండి 5.5V DC
• రిసెప్షన్ దూరం: 15 నుండి 18 మీటర్లు
• కాంపాక్ట్ డిజైన్: Miniaturized for space-saving integration
• విస్తృత అప్లికేషన్: Compatible with AV equipment (MD audio, TV, VCR, CD, DVD) and home appliances (air conditioners, fans)
• మెటీరియల్: Constructed from durable plastic and alloy components
• ప్యాకేజీ కంటెంట్: Includes 2 units of the Infrared Remote Control Receiver Module

3. స్పెసిఫికేషన్లు

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

This module is designed for integration into custom electronic circuits. Installation typically involves soldering the module's pins to a circuit board.

4.1 పిన్ గుర్తింపు

• VCC: Power supply input (2.7V - 5.5V)
• GND: గ్రౌండ్ కనెక్షన్
• వెలుపల: Infrared signal output

4.2 కనెక్షన్ మార్గదర్శకాలు

1. విద్యుత్ సరఫరా వాల్యూమ్ నిర్ధారించుకోండిtage 2.7V నుండి 5.5V వరకు పేర్కొన్న పరిధిలో ఉంది.
2. Connect the VCC pin to the positive terminal of your power supply.
3. Connect the GND pin to the ground of your circuit.
4. Connect the OUT pin to the input of your microcontroller or signal processing circuit.
5. Carefully solder the pins to avoid short circuits or damage to the module.

Image 1: Two uxcell 1838 Infrared Remote Control Receiver Modules. These modules feature a compact, rectangular metal casing with a dark, translucent dome on top for infrared reception and three metal pins extending from the bottom for electrical connections.

5. ఆపరేటింగ్ సూచనలు

Once properly connected and powered, the uxcell 1838 module will continuously scan for incoming infrared signals. When an infrared signal, such as from a remote control, is detected within its reception range (15-18 meters), the module will output a corresponding electrical signal on its OUT pin.

• The output signal typically requires decoding by a microcontroller or dedicated IR decoder IC to interpret the commands sent by the remote control.
• Ensure a clear line of sight between the infrared remote control and the module for optimal performance.

Image 2: This image displays two uxcell 1838 Infrared Remote Control Receiver Modules, similar to Image 1. Additionally, it includes a small inset picture showing a module being held between two fingers, illustrating its compact size and scale for practical applications.

6. నిర్వహణ

The uxcell 1838 Infrared Remote Control Receiver Module requires minimal maintenance. Adhere to the following guidelines to ensure longevity and reliable operation:

• శుభ్రముగా ఉంచు: Periodically clean the translucent dome of the module with a soft, dry cloth to prevent dust or debris from obstructing infrared reception.
• తేమను నివారించండి: Protect the module from moisture and liquids, as this can cause electrical damage.
• ఉష్ణోగ్రత నియంత్రణ: Operate and store the module within standard environmental temperatures. Avoid extreme heat or cold.
• జాగ్రత్తగా నిర్వహించండి: Avoid applying excessive force to the pins or the module body during installation or handling.

7. ట్రబుల్షూటింగ్

If you encounter issues with the Infrared Remote Control Receiver Module, consider the following troubleshooting steps:

• సిగ్నల్ రిసెప్షన్ లేదు:
  • Verify that the module is correctly wired (VCC, GND, OUT).
  • విద్యుత్ సరఫరా వాల్యూమ్‌ను తనిఖీ చేయండిtage to ensure it is within the 2.7V-5.5V range.
  • Ensure the remote control is functioning correctly (e.g., check battery).
  • Confirm there are no obstructions between the remote and the module.
• Short Reception Range:
  • Ensure the module's dome is clean and free from dust or smudges.
  • Minimize sources of infrared interference (e.g., direct sunlight, strong incandescent lights).
  • Verify the remote control's infrared emitter is clean and functional.
• అస్తవ్యస్త ప్రవర్తన:
  • Check for loose connections or poor solder joints.
  • విద్యుత్ సరఫరా స్థిరంగా మరియు శబ్దం లేకుండా ఉందని నిర్ధారించుకోండి.
  • Review your signal decoding logic if using a microcontroller.

8. వారంటీ మరియు మద్దతు

Specific warranty information for the uxcell 1838 Infrared Remote Control Receiver Module is not provided in this manual. For details regarding warranty coverage, technical support, or replacement parts, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.